exam chapter 6 - v4.1

1

1. Which network device makes forwarding decisions based on the destination MAC address that is contained in the frame?

1

2 A customer is considering a multipurpose device to create a home network. Which three devices are usually integrated into a multipurpose network device? (Choose three.)

1

3 Which technology would be recommended for a business that requires workers to access the Internet while visiting customers at many different locations?

1

4 When is a dial-up connection used to connect to an Internet provider?

1

5 Which type of connection to the Internet is capable of the fastest transfer rates?

1

6 Which statement describes the logical topology for a LAN?

1

7 ABC Company requires preventive maintenance for all local network cabling once a year. Which task should be included in the preventive maintenance program?

1

8 What is an example of network maintenance?

1

9 A technician is troubleshooting a problem where the user claims access to the Internet is not working, but there was access to the Internet the day before. Upon investigation, the technician determines that the user cannot access the network printer in the office either. The network printer is on the same network as the computer. The computer has 169.254.100.88 assigned as an IP address. What is the most likely problem?

1

10 Which technology is most often used to connect devices to a PAN?

1

11 Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.)

1

12 A device has an IPv6 address listed as 2001:0DB8:75a3:0214:0607:1234:aa10:ba01. What is the interface ID of the device?

1

13 What is a characteristic of the UDP protocol?

1

14 What would be a disadvantage of configuring a wireless router or access point to operate only in accordance with the 802.11g protocol standard?

1

15 What is the maximum segment length that is specified by the 1000BASE-T standard?

1

16 Which two characteristics describe Ethernet technology? (Choose two.)

1

17 Which three factors are reasons for a company to choose a client/server model for a network instead of peer-to-peer? (Choose three.)

1

18 What benefit is provided by a computer data network?

1

19 When would a printer be considered a network host?

1

20 A user can print to a printer that is on the same network, but the traffic of the user cannot reach the Internet. What is a possible cause of the problem?

1

21 What is identified by the 100 in the 100BASE-TX standard?

1

22 A user installs a new gigabit NIC in a PC. The user notices that the data transfer rate is much slower than expected. What should the user do to fix the problem?

1

23 A company adds a few refurbished computers to a network. The company finds, however, that the refurbished computers perform significantly worse than the original networked computers do. The original computers performed much faster with applications that required the transfer of data over the network. What should the company technicians do?

1

24 What is the major difference between desktop and laptop motherboards?

1

25 Which type of interface do current laptops use to achieve similar expansion capabilities as desktops?

1

26 Which display technology is most commonly found in modern laptop computers?

1

27 Which generation of cell-phone standards was the first to deal with how to send and receive text, photographs, and video?

1

28 Which two characteristics make laptops a better choice than desktop computers? (Choose two.)

1

29 Refer to the exhibit. Which type of connection is indicated when a laptop LED is illuminated with the symbol that is shown?

1

A technician is responding to a helpdesk ticket for a laptop that has a distorted image of the Windows desktop. What is one possible solution?

1

31 Which two devices can be individually configured within Windows XP to power off after the laptop has been idle for a given period of time? (Choose two.)

1

32 Which three components commonly connect to USB or FireWire ports? (Choose three.)

1

33 Which two laptop ports are used primarily for communication and network connectivity? (Choose two.)

1

34 Where can a technician change the power schemes on a laptop running Windows XP?

1

35 Which two questions that a technician can ask during the troubleshooting process are considered open-ended? (Choose two.)

1

36 A technician is replacing a laptop SODIMM. With what component is the technician working?

1

37 Which two actions should be performed to clean the surface of CDs and DVDs? (Choose two.)

1

38 A technician has been called in to troubleshoot a laptop that fails to power on. The technician repeatedly pushes the power button without any results. What should the technician do next?

1

39 Refer to the exhibit. Which two form factors are supported by the devices shown in the graphic? (Choose two.)

1

40 Refer to the exhibit. A laptop has these graphics on specific keys on the keyboard. Which key would be used in conjunction with the Fn key to connect a laptop to an external monitor?

1

41 Refer to the exhibit. Which laptop component port is circled?

1

42 What is the proper way to clean optical drives?

1

43 Which component should be removed before cleaning a laptop?

(Chapter 6 - Networks) Cisco IIT essentials Test sobre exam chapter 6 - v4.1, creado por groche el 22/05/2014.

exam chapter 6 - v4.1

exam chapter 6 - v4.1

1. Which network device makes forwarding decisions based on the destination MAC address that is contained in the frame?

2 A customer is considering a multipurpose device to create a home network. Which three devices are usually integrated into a multipurpose network device? (Choose three.)

3 Which technology would be recommended for a business that requires workers to access the Internet while visiting customers at many different locations?

4 When is a dial-up connection used to connect to an Internet provider?

5 Which type of connection to the Internet is capable of the fastest transfer rates?

6 Which statement describes the logical topology for a LAN?

7 ABC Company requires preventive maintenance for all local network cabling once a year. Which task should be included in the preventive maintenance program?

8 What is an example of network maintenance?

10 Which technology is most often used to connect devices to a PAN?

11 Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.)

12 A device has an IPv6 address listed as 2001:0DB8:75a3:0214:0607:1234:aa10:ba01. What is the interface ID of the device?

13 What is a characteristic of the UDP protocol?

14 What would be a disadvantage of configuring a wireless router or access point to operate only in accordance with the 802.11g protocol standard?

15 What is the maximum segment length that is specified by the 1000BASE-T standard?

16 Which two characteristics describe Ethernet technology? (Choose two.)

17 Which three factors are reasons for a company to choose a client/server model for a network instead of peer-to-peer? (Choose three.)

18 What benefit is provided by a computer data network?

19 When would a printer be considered a network host?

20 A user can print to a printer that is on the same network, but the traffic of the user cannot reach the Internet. What is a possible cause of the problem?