19677715
Descrição
FlashCards por Stephanie Lee, atualizado more than 1 year ago
|
Criado por Stephanie Lee
aproximadamente 5 anos atrás
|
|
| Questão | Responda |
| You have a server named Server 1 that runs Windows Server 2016 and has the Hyper-V role installed. On Server 1, you plan to create a virtual machine named VM1. You need to ensure that you can start VM1 from the network. What are two possible ways to achieve the goal? Each correct answer presents a complete solution. A. Create a generation 2 virtual machine. B. Create a generation 1 virtual machine and run the Enable-NetAdapterPackageDirect cmdlet. C. Create a generation 1 virtual machine that has a legacy network adapter. D. Create a generation 1 virtual machine and configure a single root I/O virtualization (SRV-IO) interface for the network adapter. | A, C |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB. The VHD contains 400 GB of free space. You need to reduce the amount of disk space used by the VHD. What should you run? A. the Mount-VHD cmdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet E. the Set-VMHost cmdlet F. the Set-VMProcessor cmdlet G. the Install-WindowsFeature cmdlet H. the Optimize-VHD cmdlet | H |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: You use Windows PowerShell Desired State Configuration (DSC) to create a default configuration and then you apply the configuration to the virtual machines. Does this meet the goal? A. Yes B. No | A |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
C |
|
Image:
1 (binary/octet-stream)
|
B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have two servers that run Windows Server 2016. You plan to create a Network load balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be used on the same subnet and to have dynamic IP addresses. Does this meet the goal? A. Yes B. No | B |
| You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1? A. the Network Policy and Access Services server role B. the Remote Access server role C. the Data Center Bridging Feature D. the Network Controller server role | B |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
A |
| You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1. Which cmdlet should you use? A. Set-NetNeighbor B. Remove- VMSwitchTeamMember C. Set-VMSwitch D. Enable- VMSwitchExtension | C |
| You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1 and Node2. On Node1, you create a virtual machine named VM01 by using Hyper-V Manage. You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable. What should you do? A. From Failover Cluster manager, run the configure Role actions. B. From Hyper-V Manager, click VM01 and click Enable Replication C. From Hyper-V Manager Click Node 1 and modify the Hyper-V settings. D. From Windows PowerShell, run the Enable-VMReplication cmdlet. | A |
| You have a server named Server1 that runs Windows Server 2016. Server1 will be used as a VPN server. You need to sonfigure Server1 to support VPN Reconnect. Which VPN protocol should you use? A. PPTP L2TP C. SSTP D. IKEv2 | D |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of-business named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory. You need to log an event in the Application event log whenever App1 consumes more than 4 GB memory. Solution: You create a system configuration informtaion data collector. Does this meet the goal? A. Yes B. No | B |
| You have a server name Server1 that runs Windows Server 2016. You install the Docker daemon on Server 1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do? A. Run the New-NetFirewallRule cmdlet B. Run the Set-ServiceWindows PowerShell cmdlet C. Edit the daemon .json file D. Edit the configuration json file | C |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have two servers that run Windows Server 2016. You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast. Does this meet the goal? A. Yes B. No | B |
|
Image:
1 (binary/octet-stream)
|
D |
| You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed. An iSCSI SAN connects to the network. You create a LUN on the SAN and configure both servers to connect to the iSCSI target. You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage. You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously. Which tool should you use? A. the clussvc.exe command B. the cluster.exe command C. the Computer Management console D. the configurehyperv.exe command E. the Disk Management console F. the Failover Cluster Manager console G. the Hyper-V Manager console H. the Server Manager Desktop app | F |
|
Image:
1 (binary/octet-stream)
|
B |
| You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016. You install the Remote Access Server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server. What should you do? A. From Routing and Remote Access, configure the authentication provider. B. From the Connection Manager Administration Kit, create a Connection Manager profile C. From Server Manager, create an Access Policy D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account. | A |
|
Image:
1 (binary/octet-stream)
|
A |
| You need to create highly available storage spaces that connect to directly attached storage on the hosts. Which cmdlet should you use? A. Enable-ClusterStorageSpacesDirect B. Set-StoragePool C. Add-ClusterDisk D. Update-ClusterVirtualMachineConfiguration | A |
|
Image:
1 (binary/octet-stream)
|
B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution : You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO). Does this meet the goal? A. Yes B. No | B |
| You have an application named App1. App1 is distributed to multiple Hyper-V machines in a multitenant environment. You need to ensur ethat the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment? A. Network Controller and Windows Server Network Load Balancing (NLB) nodes B. Network Controller and Windows Server Software Load Balancing (SLB) nodes C. a RAS Gateway and Network Controller and Windows Server Network Load Balancing (NLB) nodes D. a RAS Gateway and Network Controller and Windows Server Storage Load Balancing (SLB) nodes | D |
|
Image:
1 (binary/octet-stream)
|
B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a two node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1. You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly. Which tool should you use? A. the clussvc.exe command B. the cluster.exe command C. the Computer Management console D. the configurehyperv.exe command E. the Disk Management console F. the Failover Cluster Manager console G. the Hyper-V Manager console H. the Server Manager Desktop app | F |
| You have a failover cluster name Cluster1. A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1. You need to configure monitoring of VM1. If App1 adds an error to the Application event log, VM1 should be automatically rebooted and moved to another cluster node. Which tool should you use? A. Hyper-V Manager B. Failover Cluster Manager C. Server Manager D. Resource Monitor | B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a two node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1. You configure a Hyper-V Replica of VM1 to Server1. You need to perform a Test Failover of VM1. Which tool should you use? A. the clussvc.exe command B. the cluster.exe command C. the Computer Management console D. the configurehyperv.exe command E. the Disk Management console F. the Failover Cluster Manager console G. the Hyper-V Manager console H. the Server Manager Desktop app | G |
| Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016. All of the offices are connected by high speed, low latency WAN links. You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install? (Select Two) A. the Multipath I/O feature B. the Routing role service C. the Network Controller server role D. the Canary Network Diagnostics feature E. the Data Center Bridging feature | C, E |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1. You need to ensure that you can use nested virtualization on VM1. What should you run on Server1? A. the Mount-VHD cmdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet E. the Set-VMHost cmdlet F. the Set-VMProcessor cmdlet G. the Install-WindowsFeature cmdlet H. the Optimize-VHD cmdlet | F |
| You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled. You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network. Which cmdlet should you run? A. Add-VMNetworkAdapterAcl B. Set-VMNetworkAdapter C. New-VMResourcePool D. Set-VMNetworkAdapterRoutinDomainMapping | A |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a Hyper-V host named Server1 that runs Windows Server 2016. You plan to deploy several shielded virtual machines on Server1. You deploy a Host Guardian on a new server. You need to ensure that Server1 can host shielded virtual machines. What should you run first? A. the Mount-VHD cmdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet E. the Set-VMHost cmdlet F. the Set-VMProcessor cmdlet G. the Install-WindowsFeature cmdlet H. the Optimize-VHD cmdlet | G |
| Your network contains an Active Directory domain named Contoso.com. The domain contains two severs name Server1 and Server2 that run Windows Server 2016. The servers have the same hardware configuration. You need to asynchronously replicate volume F: from Server1 to Server2. What should you do? A. Run New-SRPartnership and specify the -ReplicationMode parameter B. install the Failover Clustering feature and create a new sluster resource group. C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV) D. Run Set-DfsrServicewConfiguration and specify the -RPCPort parameter | A |
|
Image:
1 (binary/octet-stream)
|
B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution : From a Group Policy Object (GPO), you create an application control policy, and then you apply the policy to the virtual machines. Does this meet the goal? A. Yes B. No | B |
| You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk. To each server, you attach a new 4 TB SATA hard disk. You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks. Which command should you run before you enable Storage Space Direct? A. Add-ClusterSharedVolume -Name "Disk 1" -Cluster Cluster1 B. New-Cluster -Name Cluster1 -Node 'Server1', 'Server2', 'Server3', 'Server4' -NoStorage C. Get-ClusterAvailableDisk -Cluster Cluster1 | Add-ClusterDisk D. New-ClusterStorageEnclosure -id 1 -name Cluster1 -type jbod -ConectingString Server1,Server2,Server3,Server4 | B |
|
Image:
1 (binary/octet-stream)
|
B The VHDX requires two partitions. |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of-business named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory. You need to log an event in the Application event log whenever App1 consumes more than 4 GB memory. Solution: You create a performance counter data collector. Does this meet the goal? A. Yes B. No | B |
| You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2, and Server3 that run Windows Server 2016. Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You add a Hyper-V Replica Broker role named Broker1 to Cluster1. Server3 is a Hyper-V server. A virtual machine named VM! runs on Server3. Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only. You need to ensure that you can perform migration of VM1 to Server2. What should you do? A. Modify the Storage Migration settings on Server3. B. Mofidy the Cluster Permissions for Cluster1 C. Add the Server3 computer account to the Replicator group on Server1 and Server2. D. Modify the Delegation settings for the Server3 computer account. | D |
|
Image:
1 (binary/octet-stream)
|
A |
| Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. Server1 is located in the perimeter network. You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services farm by using a certificate that has a subject name of sts.contoso.com. You need to enable certificate authentication from the Internet on Server1. Which two inbound TCP ports should you open on the Firewall? Each correct answer presents part of the solution. A. 389 B. 443 C. 3389 D. 8531 E. 49443 | B, E |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have two servers that run Windows Server 2016. You plan to create a Network load balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be used on the same subnet and to have static IP addresses. You configure the cluster to use multicast. Does this meet the goal? A. Yes B. No | A |
|
Image:
1 (binary/octet-stream)
|
D |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a Hyper-V host named Server1 that runs Windows Server 2016 and a two-node scaleout file server named Cluster1. A virtual machine named VM1 runs on Server1. You need to migrate the storage on VM1 to Cluster1. Which tool should you use? A. the clussnc.exe command B. the cluster.exe command C. the Computer Management console D. the configurehyperv.exe command E. the Disk Management console F. the Failover Cluster Manager console G. the Hyper-V Manager console H. the Server Manager Desktop app | G |
| You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a VM named VM1. VM1 is configured to run the Docker daemon. On VM! you have a container network that uses transparent mode. You need to ensure that containers that run on VM! can obtain IP addresses from DHCP. What should you do? A. On VM1, run docker network connect B. On Server1, run Get-VMNetworkAdaper-VMName VM1 | Set-VMNetworkAdapterAddressSpoofing on C. On Server1, run docker network connect D. On VM1, run Get-VMNetworkAdaper-VMName VM1 | Set-VMNetworkAdapterAddressSpoofing on | D |
|
Image:
1 (binary/octet-stream)
|
A |
| You have a server that runs Windows Server 2016. The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4 and Disk5. A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the panty storage layout Disk3 fails. You need to remove Disk3 from Pool1. Which two commands should you run? Each correct answer presents part of the solution. A. Update-StoragePool-FriendlyName Pool1 B. Reset-PhysicalDisk-FriendlyName Disk3 C. Set-PhysicalDisk-FriendlyName Disk3-Usage Retired D. Set-ResiliencySetting-StoragePool Pool1-PhysicalDiskRedundancyDefault 4 E. Remove-PhysicalDisk-FriendlyName Disk3 | C, E |
| You need to modify the GPO prefix by IPAM. What should you do? A. Run the Set-IpamConfiguration cmdlet B. Click Provision the IPAM server in Server Manager C. Click Configure Server Discovery in Server Manager D. Run the Invoke-IpamGpoProvisioning cmdlet | A |
|
Image:
1 (binary/octet-stream)
|
H |
|
Image:
1 (binary/octet-stream)
|
A |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2016 installed. Server2 has Windows 2012 R2 installed. Each Hyper-V server has 3 network cards. Each network card is connected to a different subnet. Server2 contains a VM named VM5. You plan to perform a live migration of VM5 to Server1. You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run? A. the Mount-VHD comdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet E. the Set-VMHost cmdlet F. the Set-VMProcessor cmdlet G. the Install-WindowsFeature cmdlet H. the Optimize-VHD cmdlet | E |
|
Image:
1 (binary/octet-stream)
|
C |
| You manager has asked you to configure the company Windows Server 2016 domain controller. He wants all new computer accounts to be placed in the General OU when computers join to the domain. Which command should you use to accomplish this? A. Dsmove B. Netdom C. Redircmp D. None of these | C |
| You want to capture the state, data, and hardware configuration of a running virtual machine. Which checkpoint can be very useful if you need to recreate a specific state or condition of a running VM so that you can troubleshoot a problem? A. Production B. Standard | B. Standard checkpoints capture the state, data, and hardware configuration of a running machine and are intended for use in development and test scenarios. |
| Which container type is desribed below: Provides application isolation through process and namespace isolation technology. This container shares a kernel with the container host and all containers running on the host. A. Hyper-V Container B. Windows Server Container | B |
| Your IT company is constantly changing, with new users coming and going throughout the year. One of your common tasks requires the deletion of user accounts for employees who have left the company. Which command can be used to delete user accounts? A. LDIFDE B. Dsmod C. Dspromo D. Netsh | A |
| One of your team previously opened Hyper-V Manager, selected a VM and followed the Enable Replication wizard. The process was completed successfully and replications were occurring as expected. Several weeks later and you now want to run a planned failover. Which of the following steps is the correct starting point? A. Right-click the primary VM and select Replication > Planned Failover B. Right-click the replica VM and select Replicatio > Planned Failover C. Right-click the primary VM and select Replication > Extend Replication D. Right-click the replica VM and select Replication _ Test Failover | A |
| You have just finished installing Windows Server 2016 on a new server. Your colleague has informed you that it's essential that you must activate Windows Server. Which of the following command line tools can be used to Acvtivate Windows Server? A. Netdom C:\windows\system32\slmgr.vbs -ato B. Netsh C:\windows\system32\slmgr.vbs -ato C. Ocsetup C:\windows\system32\slmgr.vbs -ato D. Cscript C:\windows\system32\slmgr.vbs -ato | D |
| The Host Guardian Service supports two different deployments of a Guarded fabric (attestation modes). The statement below describes which mode? Guarded hosts that can run Shielded VMs are approved based on their identity, measured boot sequence and code integrity policies so that you can ensure that these hosts are only running approved code. A. Admin-trusted attestation B. TPM-trusted attestation | B. TPM-trusted attestation offers the strongest possible protections but also requires more configuration steps. Host hardware and firmware include TPM 2.0 and UEFI 2.3.1 with secure boot enabled. TPM trusted attestation is the mode Microsoft recommends that you use because it offers stronger assurances but it requires that you Hyper-V hosts have TPM 2.0. |
| Virtual Network Manager (available from the Hyper-V Manager snap-in) offers three types of virtual networks that you can use to define various networking topologies for VMs and the virtualization server. Which type of virtual network is isolated from all external network traffic on the virtualization server, as well as any network traffic between the management operating system and the external network. A. Private virtual network B. Internal virtual network | A |
| You have decided to install Windows Server 2016 by choosing the Service Core Installation option. If you want to install, configure or uninstall server roles remotely, what tool would you use? A. Any of these B. Windows PowerShell C. Remote Server Administration Tools (RSAT) D. Server Manager | A |
| When you create a new SET team, you must configure the following team properties: Member adapters and Load balancing mode. Which Load balancing mode ensures that outbound loads are distributed based on a hash of the TCP Ports and IP addresses? This mode also re-balances loads in real time so that a given outbound flow can move back and forth between SET team members. A. Dynamic B. Hyper-V Port | A |
| You want to boot a Linux Operating System with the Secure Boot option enabled in a virtual machine. This will be the first time you boot the OS. What must you do? A. Set the -BootOrder to HardDiskDrive B. Configure the virtual machine to use the Microsoft UEFI Certificate Authority C. You can't enable Secure Boot with Linux D. Set -EnableSecureBoot without specifying a template | B. Linux operating systems running on newer generation virtual machines can boot with the Secue Boot option enabled. Before you boot the virtual machine for the first time, you muct configure the virtual machine to use the Microsoft UEFI Certificate Authority. You can do this from Hyper-V Manager, Virtual Machine Manager, or an elevated Windows PowerShell session. |
| Which terminology is being descreibed below? Time synchronization is critical for the proper operation of many Windows services and line-of-business applications. The ____uses the Network Time Protocol (NTP) to synchronize computer clocks on the network so that an accurate clock value, or time stamp, can be assigned to network validation requests and resource access requests. A. Network Services Shell (Netsh) B. Listsvc C. Windows Time service (W32time) D. Fixmbr | C |
|
Image:
1 (binary/octet-stream)
|
B |
| Your network conatins an Active Directory forest. You install Windows Server 2016 on 10 virtual machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy Object (GPO). Does this meet the goal? A. Yes B. No | B |
| You have a server name Server1 that runs Windows Server 2016. You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1. You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups. Solution: You mount the volume to C:\Backup, and you format the volume by using NTFS. Does this meet the goal? A. Yes B. No | A |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a server name Server1 that runs Windows Server 2016. You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1. You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups. Solution: You assign a drive letter to the volume, and you format the volume by using ReFS. Does this meet the goal? A. Yes B. No | B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a server name Server1 that runs Windows Server 2016. You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1. You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups. Solution: You mount the volume to C:\Backup, and you format the volume by using FAT32. Does this meet the goal? A. Yes B. No | B |
| You have two servers name Server1 and Server2 that run Windows Server 2016. Server1 contains a volume named Volume1. You implement a Storage Replica that replicates the contents of Volume1 from Server1 to Server2. Server1 fails. From Server2, you need to ensure that you can access the contents of Volume1. What should you run? A. Set-SRPartnership B. Update-StoragePool C. vssadmin revert shadow D. Clear-FileStorageTier | A |
|
Image:
1 (binary/octet-stream)
|
Image:
1 (binary/octet-stream)
|
|
Image:
1 (binary/octet-stream)
|
C, E |
| You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1. You need to ensure that members of a security group named Docker Administration can administer Docker. What should you do? A. Run the Set-Service cmdlet B. Modify the Security settings of Dockerd.exe C. Edit the Configuration. json file D. Run the sc config command | D. The preferred method for configuring the Docker Engine on Windows is using a configuration file. The configuration file can be found at ':\ProgramData\Docker\config\daemon.json'. If this file does not already exist, it can be created. The Docker Engine can also be configured by modifying the Docker service using the sc config command. |
| You have a Hyper-V host that runs Windows Server 2016. You need to identify the amount of processor resources consumed by Hyper-V and virtual machines. Which counter should you use from Performance Monitor? A\Hyper-V Hypervisor\Logical Processors B. \Hyper-V Hypervisor Virtual Processor__Total_\% Hypervisor Run Tim C. \Hyper-V Hypervisor Logical Processor(_Total)\% Total Run Time D. \Hyper-V Hypervisor Root Virtual Processor)_Total)\% Guest Run Time | C |
|
Image:
1 (binary/octet-stream)
|
Image:
1 (binary/octet-stream)
|
| Your network contains 3 Hyper-V hosts. You add all of the hosts to a cluster. You need to create highly available storage spaces that connect to directly attached storage on the hosts. Which cmdlet should you use? A. Enable-ClusterStorageSpacesDirect B. Add-ClusterDisk C. Update-ClusterVirtualMachineConfiguration D. Set-StoragePool | A. Storage Spaces Direct (S2D) uses industry-standard servers with local-attached drives to create highly available, highly scalable software-defined storage. S2D is included in Windows Server 2016 Datacenter. To enable S2d: PS C:\?Enable-ClusterStorageSpacesDirect -CimSession Note: if this command is run locally on one of the cluster nodes, the -CimSession parameter is not necessary |
|
Image:
1 (binary/octet-stream)
|
Image:
1 (binary/octet-stream)
|
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. You have a Hyper-V host named Server1 that runs Windows Server 2016. You plan to deploy several shielded machines on Server1. YOu deploy a Host Gueardian on a new server. You need to ensure that Server1 can host shielded virtual machines. What should you run first? A. the Set-VM cmdlet B. the Set-VMHost cmdlet C. the Set-VMProcessor cmdlet D. the Install-WindowsFeature cmdlet | D |
|
Image:
1 (binary/octet-stream)
|
D |
|
Image:
1 (binary/octet-stream)
|
A, C |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
B |
| You have a Scale-Out File Server that has a share named Share1. Share1 contains a virtual disk file named Disk1.vhd. You plan to create a guest failover cluster. You need to ensure that you can use the virtual disk as a shared virtual disk for the guest failover cluster. Which cmdlet should you use? A. Optimize-VHDSet B. Set-VHD C. Convert-VHD D. Optimize-VHD | C |
| Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Each server has an operating system disk and four data disks. All of the disks are locally attached SATA disks. Each disk is a basic disk, is initialized as an MBR disk, and has a single NTFS volume. You plan to implement Storage Spaces Direct by using the data disks on Server1 and Server2. You need to prepare the data disks for the Storage Spaces Direct implementation. What should you do? A. Initialize the data disks as GPT disks and create an ReFS volume on each disk B. Format the volumes on the data disks as exFAT. C. Delete the volumes from the data disks. D. Convert the data disks to dynamic disks | C |
| You have container host named Server1 that runs Windows Server 2016. You need to start a Hyper-V container on Server1. Which parametershould you use with the docker run command? A. --expose B. --entrypoint C. --runtime D. --isolation E. --privileged | D |
| You have a server named Server1 that runs Windows Server 2016. Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks. You create a virtual disk named Disk1 that uses a mirrored layout. You create a partition named Partition1 that uses all of the available space on Disk1. You need to extend Partition1. What should you do first? A. From Windows PowerShell, run the Expand-IscsiVirtualDisk Cmdlet B. From Windows PowerShell, run the Resize-VirtualDisk cmdlet C. From Windows PowerShell, run the Resize-StorageTier cmdlet D. From Disk Management, modify the properties of partition1 | A |
| You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The hosts are nodes in failover cluster. You have a virtual machine name VM1. VM1 connects to a virtual switch named vSwitch1. You discover that VM1 automatically live migrates when vSwitch1 temporarily disconnects. You need to prevent VM1 from being live migrated when vSwitch1 temporariliy disconnects. What should you do? A. Run the Set-NMNetworkAdapter cmdlet and set Storm Limit to 0. B. From the network adapter setting of VM1, disable the Heartbeat integration service. C. Run the Set-VMNetworkAdapter cmdlet and set IsManagementOS to False. D. From the network adapter setting of VM1, disable the Protected network setting. | D |
| You have a Hyper-V host named Server1 that runs Windows Server 2016. The host has two virtual machines (VMs) named VM1 and VM2. On the Hyper-V host, you create two virtual disks named Disk1 and Disk2. You plan to create a test environment for Storage Spaces Direct. You need to configure the VMs to connect to the virtual disks. What should you use? A. An iSCSI target B. A virtual SCSI controller C. A virtual fiber channel adapter D. A virtual IDE controller | B |
| Your network contains an Active Directory domain. The domain contains two Hyper-V hosts. You plan to perform live migrations between the hosts. You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first? A. From Server Manager, install the Host Guardian server role on a domain controller. B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators Group C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers. D. From Server Manager, install the Host Guardian server role on both servers. | C. If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps to configure constrained delegation. |
|
Image:
1 (binary/octet-stream)
|
B, D. Common requirements for any form of live migration: two (or more) servers running Hyper-V that support hardware virtualization, use processors from the same manufacturer, and belong to either the same Active Directory domain, or to domains that trust each other. Live migration is ONLY supported on processors from the same manufacturer. |
| After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server name Server1 that runs Windows Server 2016. You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1. You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups. Solution: You mount the volume to C:\Backup, and you format the volume by using exFAT. Does this meet the goal? A. Yes B. No | B |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master. Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2. Does this meet the goal? A. Yes B. No | B |
| You deploy two servers that run Windows Server 2016. You install the Failover Clustering feature on both servers. You need to create a workgroup cluster. What should you do? A. Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Tun the New-Cluster cmdlet and specify an administrative access point of None. B. Configure both of the servers to be in a workgroup named Workgroup. Configure the Cluster Service log on as a Network Service. Run the New-Cluster cmdlet and specify an administrative access point of DNS. C. Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of DNS D. Configure both of the servers to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of none. | C |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master. Solution: from a command prompt, you run netdom query fsmo. Does this meet the goal A. Yes B. No | A |
| You have two servers name Server1 and Server2. A firewall exists between Server1 and Server2. Both servers run Windows Server Update Services (WSUS). Server1 downloads updates from Microsoft update. Server2 must synchronize updates from Server1. Which port should be open on the firewall? A. 80 B. 443 C. 3389 D. 8530 | D |
| You have a server named Server1 that runs Windows Server 2016. Windows Defender is enabled on Server1. Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, Microsoft OneDrive, and Microsoft SharePoint Online. App1 also interacts with several local services. You need to prevent Windows Defender from scanning any files opened by App1. What should you do on Server1? A. Run the Set-ExecutionPolicy cmdlet B. Run the New-AppLockerPolicy cmdlet C. Modify the real-time protection settings in Windows Defender D. Run the Add-MpPreference cmdlet E. Modify the cloud-based protection settings in Windows Defender F. Run the New-CiPolicy cmdlet | D |
| Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2016. Server1 has an ReFS-formatted volume D: and NTFS-formatted E:. The volumes do not contain any data. You install the Data Deduplication role service on Server1. You need to implement Data Deduplication for volumes on D: and E:. Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem EXFat and EnableDeDupVolume -Volume D:,E:. Does this meet the goal? A. Yes B. No | B |
| You have two servers name Server1 and Server2 that run Windows Server 2016. You plan to implement Storage Replica to replicate the contents of volumes on Server1 and Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps. Which cmdlet should you run? A. New-NetQosPolicy B. Set-NetworkController C. New-NetTransportFilter D. New-StorageQosPolicy | A |
| You have a server named Server1 that runs Windows Server 2016 and is a domain controller. You install the DNS Server server role on Server1. You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use? A. Set-DnsServer B. Active Directory Sites and Services C. Dns.exe D. Dnscmd.exe | D |
| Active Directory recycle bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1. What should you do? A. Perform tombstone reanimation B. Export and import data by using Domain. C. Perform a non-authoritative restore. D. Recover the items by using Active Directory Recycle Bin. | B. A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative restore, but not a non-authoritative restore. The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmin. |
|
Image:
1 (binary/octet-stream)
|
A |
| You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 hosts a virtual machine named VM1 that is in a Running state. On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2? A. Off B. Saved C. Running D. Paused | B |
| You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a Web Application Proxy. Which server role or role service should install on Server1? A. Web Server (IIS) B. Network Policy and Access Services C. Direct Access and VPN (RAS) D. Active Directory Federation Services E. Remote Access | E |
| You have a server named Server1. You enable Bitlocker on Server1. You need to change the password for the Trusted Platform Module (TPM) chip. What should you run on Server1? A. Initialize-Tpm B. Import-TpmOwnerAuth C. repair-bde.exe D. bdehdcfg-exe | B |
| Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2016. Server1 has an ReFS-formatted volume D: and NTFS-formatted E:. The volumes do not contain any data. You install the Data Deduplication role service on Server1. You need to implement Data Deduplication for volumes on D: and E:. Solution: From Windows PowerShell you run Enable-DeDupVolume-Volume D:,E:. Does this meet the goal? A. Yes B. No | B |
| Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master. Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master. Does this meet the goal? A. Yes B. No | B. This solution only shows the domain FSMO roles, not the forest FSMO roles. |
| You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 is in a workgroup. VM1 is currently in a running state. You need to create 10 copies of VM1 on Server1 in the least amount of time possible. Which cmdlets should you use? A. Stop-VM, and then Import-VM B. Export-VM, and then Import-VM C. Checkpoint-VM, and then New-VM D. Copy-VMFile, and then New-VM | B |
| Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2016. Server1 has an ReFS-formatted volume D: and NTFS-formatted E:. The volumes do not contain any data. You install the Data Deduplication role service on Server1. You need to implement Data Deduplication for volumes on D: and E:. Solution: From Windows PowerShell, you run Format-Volume E: -FileSystem ReFS and EnableDeDupVolume -Volume D:,E:. Does this meet the goal? A. Yes B. No | B |
| You need to implement network virtualization. On which object should you configure the virtual subnet ID? A. Virtual switch B. Hyper-V server C. VM D. Virtual network adapter | A |
| Your network contains one Active Directory domain named contoso.com. You pilot DirectAccess on the network. During the pilot deployment, you enable DirectAccess only for a group Contoso\Test Computers. Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain. What should you do? A. From Windows PowerShell, run the Set-DAClient cmdlet B. From Windows PowerShell, run the Set-DirectAccess cmdlet C. From Active Directory Users and Computers, modify the membership of the Windows Authorization Access Group. D. From Group Policy Management, modify the security filtering of an object named Direct Access Client Setting Group Policy. | D |
| Note: This question is part of a series of questions that use similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question only apply to that question. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of-business named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory. You need to log an event in the Application event log whenever App1 consumes more than 4 GB memory. Solution: You create an event trace data collector. Does this meet the goal? A. Yes B. No | B |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B |
| You have a Windows container host named Server1. On Server1, you create a container named Container1. You need to mount C:\ContainerFiles from Server1 to Container1. What should you run? A. dockerd --storage-opt dm.mountopt=ContainerFiles B. docker run -it -v c:\ContainerFiles Container1 C. dockerd --storage-opt dm.datadev=/c/ContainerFiles D. docker run -it -vc:\ContainerFiles:c:\ContainerFiles Container1 | D |
| You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1. You need to ensure that members of a security group named Docker Administrators can administer Docker. What should you do? A. Run the sc privs command B. Edit the Daemon.json file C. Add Docker Administraors to the local Administrators group D. Edit the configuration.json file E. Modify the Security settings of Docker.exe F. Run the Set-Service cmdlet | B. The preferred method for configuring the Docker Engine on Windows is using a configuration file. The configuration file can be found at ':\ProgramData\Docker\config\daemon.json'. If this file does not already exist, it can be created. The Docker Engine can also be configured by modifying the Docker service using the sc config command. |
| You have a Windows Server 2016 failover cluster named Cluster1 that contains three nodes named Server1, Server2, and Server3. Each node hosts several virtual machines. The virtual machines are configured to fail over to another node in Cluster1 if the hosting node fails. You need to ensure that if the Cluster service fails on one of the nodes, the virtual machine of that node will fail over immediately. Which setting should you configure? A. FailureConditionLevel B. QuarantineDuration C. Resiliency Period D. ResiliencyLevel | D |
|
Image:
1 (binary/octet-stream)
|
C |
| You have a server named Server1 that runs Windows Server 2016. On Server1, you use the Basic template to create a new Data Collector Set named CollectorSet1. You need to configure CollectorSet1 to generate performance alerts. What should you do before you start CollectorSet1? A. Modify the performance counter data collector of CollectorSet1. B. Add a new data collector to CollectorSet1. C. Modify the configuration data collector of CollectorSet1. D. Add a new task to CollectorSet1. | B |
| You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You install the Hyper-V server role on VM1. You need to ensure that the virtual machines hosted on VM1 can communicate with the virtual machines hosted on Server1. What should you do? A. On Server1, run the Set-VmNetworkAdapterIsolation cmdlet and specify the MultiTenantStack parameter. B. On VM1, run the Set-VMNetworkAdapter cmdlet and specify the MacAddressSpoofing Off parameter. C. On VM1, run the Set-VmNetworkAdapterIsolation cmdlet and specify the MultiTenantStack On parameter D. On Server1, run the Set-VMNetworkAdapter cmdlet and specify the MacAddressSpoofing On paramter. | D |
|
Image:
1 (binary/octet-stream)
|
A, B |
| You have a server named Server1 that runs Windows Server 2016. Server1 has the Containers feature installed. You create a text file that contains the commands that will be used to automate the creation of new containers. You need to ensure that the commands in the text file are used when you create new containers. What should you name the file? A. Bootstrap.ini B. Config.ini C. Dockerfile D. Unattend.txt | C |
|
Image:
1 (binary/octet-stream)
|
D |
| You create a Storage Spaces Direct hyper-converged failover cluster. The cluster contains three nodes and a 1-TB Storage Spaces Direct volume. The cluster will store virtual machines. You plan to extend the volume by adding an additional 3-TB. What is the minimum amount of extra disk capacity required to accommodate extending the volume? A. 3TB on the coordinator node B. 3TB per node C. 4TB per node D. 4TB on the coordinator node | A |
| You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster nodes. You need to ensure that if a cluster node loses connectivity from the other nodes, the virtual machines on the node will be transitioned to one of the remaining nodes after one minute. Which settings should you modify? A. QuaranteneDuration and QuaranteneThreshold B. SameSubnetDelay and CrossSubnetDelay C. QuorumArbitrationTimeMax and RequestReplyTimeout D. ResiliencyPeriod and ResiliencyLevel | D |
|
Image:
1 (binary/octet-stream)
|
A |
| You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The hosts are nodes in a failover cluster. A highly available virtual machines named VM1 is running on Server1. You need to move VM1 to Server2 while minimizing downtime. What should you do? A. From Windows PowerShell, run Move-ClusterGroup B. From Hyper-V Manager, use the Move action C. From Failover Cluster Manager, use the Move Virtual Machine Storage option. D. From Windows PowerShell, run Move-VM. | A |
| You have a file server named Server1 that runs Windows Seerver 2016. Object access auditing is configured on Server1. You need to filter the Security event log to show all log entries that relate to a user named User1. What should you do? A. Right-click the Security log and then click Filter Current Log... On the Filter tab, type a value in the User box. B. Right-click the Security log and then click Filter Current Log... On the Filter tab, select a value from the Event sources box. C. Right-click the Security log and then click Create Custom View... On the Filter tab, type a value in the User box. D. Right-click the Security log and then click Filter Current Log... On the XML tab, modify the QueryList entry and set an EventData tag. |
Image:
1 (binary/octet-stream)
|
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
Image:
1 (binary/octet-stream)
|
|
Image:
1 (binary/octet-stream)
|
F |
| You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has an external switch named Switch1. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 has one network adapter. The network adapter connects to Switch1. You need to limit the maximum network bandwidth available to VM1 to 100Mbps. The solution must limit the bandwidth for VM1 only. Which cmdlet should you run? A. Set-NetAdapter B. Set-VMNetworkAdapter C. Set-VM D. Set-NetAdapterVmq E. Set-NetworkSwitchPortProperty |
Image:
1 (binary/octet-stream)
|
|
Image:
1 (binary/octet-stream)
|
B |
| You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2. The cluster service on Server1 fails. You need to identify the cause of the failure. What should you do? A. From Windows PowerShell, run the Get-ClusterNode cmdlet. B. From Event Viewer, review the Application event log. C. From Windows PowerShell, run the Get-ClusterLog cmdlet. D. From Event Viewer, review the System event log. | C |
|
Image:
1 (binary/octet-stream)
|
D |
| You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2. The Cluster Service on Server1 fails. You need to identify the cause of the failure. What should you do? A. From Windows PowerShell, run the Get-ClusterNode cmdlet. B. From Event Viewer, review the Application event log. C. From Windows PowerShell, run the Get-ClusterLog cmdlet. D. From Event Viewer, review the System event log. | C |
|
Image:
1 (binary/octet-stream)
|
Image:
1 (binary/octet-stream)
|
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
C |
|
Image:
1 (binary/octet-stream)
|
D. Before the physical device is allowed to be passed through to the VM, the device must be disabled on the host system. The physical device must be accessible/available exclusively to the VM only. |
|
Image:
1 (binary/octet-stream)
|
C |
| Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2016. As a domain administrator, you log on to a server named Server2 and open Windows PowerShell. You need to establish an interactive PowerShell session to a server named Server1. Which command should you run? A. New-PSSession Name Server1 B. New-PSSession -ComputerName Server1 C. Enable-PSRemoting Server1 D. Set-PSSession Configuration -AccessMode Remote -Name Server1 | B |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B, C |
|
Image:
1 (binary/octet-stream)
|
C |
|
Image:
1 (binary/octet-stream)
|
B, C |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
C |
| You have a server that runs Windows Server 2016 Standard. You create a new three-way mirror storage space. You format the storage space by using ReFS. Which two features can you use on the new storage space? Each correct answer presents a complete solution. A. file and folder permissions B. disk quotas C. Encrypting File System (EFS) D. long file names E. Data Deduplication F. Shrink volume | A, E |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
B |
| YOu have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. On VM1, Dynamic Memory is disabled, MAC spoofing is enabled for the virtual network adapter, and checkpoints are disabled. You need to ensure that you can install the Hyper-V server role on VM1. What should you do? A. Shut down VM1, enable Dynamic Memory on VM1, and then start VM1. B. Shut down VM1, run the Set-VMProcessor cmdlet, and then start VM1. C. Disable Hyper-V integration services for VM1, and then restart VM1. D. Configure VM1 to use standard checkpoints. | B |
| You have a server named Server1 that runs Windows Server 2016 and has the File and Storage Services server role installed. Server1 has an ReFS-formatted volume named volume1 that is 512GB. Volume1 is mounted as C:\App1\temp. You need to ensure that you can enable deduplication of Volume1. What should you do? A. Format Volume1 B. Unmount Volume1 C. Install a Windows feature. D. Initialize the physical disk that contains Volume1 | A |
|
Image:
1 (binary/octet-stream)
|
D. GPT is more robust and allows for volumes bigger than 2 TB. The two disks that are larger than 2 TB and Disk2 and Server1 and Disk1 on Server3. |
| You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016 R2. The servers are nodes in a failover cluster name Cluster1. You perform a rolling upgrade of the cluster nodes to Windows Server 2016. You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use? A. Update-ClusterNetworkNameResource B. Set-ClusterGroupSet C. Set-CauClusterRole D. Update-ClusterFunctionalLevel | D |
| You have a Windows Server 2016 failover cluster named Cluster1 that contains four nodes named Server1, Server2, Server3, and Server4. You need to configure Cluster1 to use directly attached storage to store several virtual machines. You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1. What should you run next? A. Run the Enable-ClusterStorageSpacesDirect cmdlet on the other three nodes. B. Create volumes. C. Create a storage pool. D. Run the Add-ClusterResource cmdlet on all of the nodes. | B |
| You have a Hyper-V server named Server1 that runs Windows Server 2016 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 connects to an external switch named Switch1. You can ping VM1 from Server1. You upgrade Server1 to Windows Server 2016. You need to ensure that you can connect to VM1 by using PowerShell Direct. What should you do? A. Configure the firewall rules on Server1. B. Enable the Hyper-V extensible switch extensions on Server1. C. Upgrade the configuration version of VM1. D. Configure the firewall rules on VM1. | C |
|
Image:
1 (binary/octet-stream)
|
D |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
A, E |
|
Image:
1 (binary/octet-stream)
|
A |
|
Image:
1 (binary/octet-stream)
|
D |
|
Image:
1 (binary/octet-stream)
|
D |
| You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run? A. the dnscmd.exe command B. the Enable-WindowsOptionalFeature cmdlet C. the dns.exe command D. the setup.exe command | B |
|
Image:
1 (binary/octet-stream)
|
B |
|
Image:
1 (binary/octet-stream)
|
C |
|
Image:
1 (binary/octet-stream)
|
D |
| You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run? A. the Install-Package cmdlet B. the Add-WindowsPackage cmdlet C. the Add-WindowsFeature cmdlet D. the setup.exe command E. the dnscmd.exe command | C. The Add-WindowsFeature cmdlet installs one or more roles, role services, or features on either the local or a specified remote server that is running Windows Server 2008 R2. This cmdlet has been replaced by the Install-WindowsFeature cmdlet in Windows Server 2012 R2. |
|
Image:
1 (binary/octet-stream)
|
C, D |
|
Image:
1 (binary/octet-stream)
|
D |
| You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run? A. the Add-WindowsPackage cmdlet B. the dnscmd.exe command C. the optionalfeatures.execommand D. the Add-WindowsFeature cmdlet | D |
| You have a Windows Server 2016 Server Core named Server1. Server1 is configured to perform real-time protection scans by using Windows Defender. You need to ensure that all of the files located In D:\App1\Data are excluded from the real-time protection scans. What should you do? A. Run the Set-MpPreference cmdlet and specify the ExclusionPath parameter B. Run the Get-ChildItem cmdlet and specify the –Exclude parameter C. From the properties of the D:\App1\Data folder, modify the permissions D. From a command prompt, run the attrib command and specify the –s parameter E. From the properties D:\App1\Data folder, enable hidden attribute F. Run the Import-ShieldingDataFile cmdlet and specify the –ShieldingDataFilePath parameter G. Run the Protect-ShieldingDataFile cmdlet and specify the –ShieldingDataFilePath parameter | A. Run the Set-MpPreference cmdlet and specify the ExclusionPath parameter |
|
Image:
1 (binary/octet-stream)
|
E. Enable to VSS integration service on VM1 |
| You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server 1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do? A. Modify the routing table on Server1 B. Run the Set-Service Windows PowerShell cmdlet C. Edit the configuration .json file D. Run the sc config command | D. The preferred method for configuring the Docker Engine on Windows is using a configuration file. The configuration file can be found at C:\ProgramData\Docker\config\daemon.json. The Docker Engine can also be configured by modifying the Docker service using the sc config command. |
| You have two servers named Server1 and Server2 that run Windows Server 2016. You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps. Which cmdlet should you run? A. New-NetQosPolicy B. Set-StorageQosPolicy C. Set-NetTCPSetting D. Set-NetUDPSetting | A. The New-NetQosPolicy cmdlet create a new network Quality of Service (QoS) policy. A QoS policy consists of two main parts: match conditions also known as filers and actions. |
| You have a server named Server1 that runs Windows Server 2016. Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks. You create a virtual disk named Disk 1 that uses mirrored layout. You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend partition 1. What should you do first. A. From Windows PowerShell, run the Resize-Partition cmdlet B. From Disk Management, extend a volume C. From windows PowerShell, run the Resize-StorageTier cmdlet D. From windows PowerShell, run the Resize-VirtualDisk cmdlet | D. From windows PowerShell, run the Resize-VirtualDisk cmdlet |
| You have a server named Server1 that runs Windows Server 2016. The server has an application named App1. App1 writes entries to the Application event log when errors are encountered. The events have IDs of either 111 or 112. You need to restart the service whenever either of these events are logged. What should you do? A. From Windows PowerShell, run the Write-EventLog cmdlet and specify the –EventID and the -source parameter B. From Windows PowerShell, run the Get-Event cmdlet and pipe the output to the Start-NetEventSession cmdlet C. From event viewer, create a custom view that has a filter for the event IDs D. From event viewer, use the create basic task wizard for each event IDs | D. From event viewer, use the create basic task wizard for each event IDs |
| The preferred method for configuring the Docker Engine on Windows is using a config file. The config file can be found at C:\ProgramData\Docker\config\daemon.json. If this files does not already exist, it can be created. However the Docker Engine can also be configured by modifying the Docker service using sc config. (Question 207) You have a server named Server1 that runs Windows Server 2016. You need to install the DNS server role on Server1. What should you run? A. The Install-Package cmdlet B. The dns.exe C. The setup.exe D. The Enable-WindowsOptionalFeature cmdlet | D. The Enable-WindowsOptionalFeature cmdlet |
Quer criar seus próprios Flashcards gratuitos com GoConqr? Saiba mais.