39482039
Descrição
FlashCards por Edward Guthrie, atualizado 2 meses atrás
|
Criado por Edward Guthrie
3 meses atrás
|
|
| Questão | Responda |
| A | Rotation about X-Axis |
| B | Rotation about Y-Axis |
| C | Rotation about Z-Axis |
| D | Cutter diameter compensation "CDC" offset address |
| E | Precision feed rate for threading on lathes |
| F | Feed Rate |
| G | G-code (preparatory code) |
| H | Tool length offset "TLO" |
| I | Arc center X-vector, also used in drill cycles |
| J | Arc center Y-vector, also used in drill cycles |
| K | Arc center Z-vector, also used in drill cycles |
| L | Fixed cycle loop count; Specification of what register to edit using G10 |
| M | M-code (Miscellaneous code) |
| N | Block number |
| O | Program number |
| P | Dwell time |
| Q | Used in drill cycles |
| R | Arc radius, also used in drill cycles |
| S | Spindle speed in RPM |
| T | Tool number |
| U | Forced Incremental X-axis movement |
| V | Forced Incremental Y-axis movement |
| W | Forced Incremental Z-axis movement |
| X | X-Coordinate |
| Y | Y-Coordinate |
| Z | Z-Coordinate |
Quer criar seus próprios Flashcards gratuitos com GoConqr? Saiba mais.