NCCER Module 1: Basic Safety Review Questions

1

The time you spend learning and practicing _____ can save your life and the lives of others.

1

In construction, keeping your work area clean and free of scraps or spills is referred to as ______.

1

The federal agency whose mission is to save lives, prevent injuries, and protect the health of America’s workers is the ______.

1

A(n) ____ inspection is conducted after an accident that requires hospitalization of three or more workers

1

______ must be reported to your supervisor.

1

The four leading causes of death in the construction industry include electrical accidents, struck-by accidents, caught-in or caught-between accidents, and ____.

1

The process of hazard recognition, evaluation, and control is the foundation of an effective ____ program.

1

People should not be able to get past ______ barricades.

1

______ are PPE used to prevent falls and protect workers who do fall.

1

Metal ladders should NOT be used near ______.

1

If you lean a straight ladder against the top of a 16-foot wall, the base of the ladder should be ______ feet from the base of the wall.

1

On construction sites where there is a break in elevation of 19 inches or more, and no ramp, runway, sloped embankment, or personnel hoist is provided, ______ may be used.

1

OSHA construction standards require ______ foot-candles of light in stairways.

1

The two basic types of scaffolds are ______.

1

The most common cause of death for equipment operators is _______.

1

To reduce the risk of workers being hurt or killed by falling materials, do not stack materials higher than a ______ height-to-base ratio.

1

A(n) is a(n) that is deeper than it is wide, and usually not wider than 15 feet.

1

Most cave-ins occur in trenches 5 to ______ feet deep and happen suddenly with little or no warning.

1

In every trench over four feet deep, there must be an exit every ______.

1

Observing proper safety precautions when working with and around electrical current is important because the human body ______.

1

The minimum safe working distance from exposed electrical conductors ______.

1

Which of the following provide the best eye protection?

1

The best shoes to wear on a construction site are ______-approved.

1

A ______ has its own clean air supply.

1

HazCom classifies all paint, concrete, and wood dust as ______ materials.

1

Under HazCom, if you spot a hazard on your job site you must ______.

1

Routes of exposure to hazardous materials include inhalation, ingestion, and ______.

1

Quiz sobre NCCER Module 1: Basic Safety Review Questions, criado por jacksonw5 em 02-09-2014.

NCCER Module 1: Basic Safety Review Questions

The time you spend learning and practicing _____ can save your life and the lives of others.

In construction, keeping your work area clean and free of scraps or spills is referred to as ______.

The federal agency whose mission is to save lives, prevent injuries, and protect the health of America’s workers is the ______.

A(n) ____ inspection is conducted after an accident that requires hospitalization of three or more workers

______ must be reported to your supervisor.

The four leading causes of death in the construction industry include electrical accidents, struck-by accidents, caught-in or caught-between accidents, and ____.

The process of hazard recognition, evaluation, and control is the foundation of an effective ____ program.

People should not be able to get past ______ barricades.

______ are PPE used to prevent falls and protect workers who do fall.

Metal ladders should NOT be used near ______.

If you lean a straight ladder against the top of a 16-foot wall, the base of the ladder should be ______ feet from the base of the wall.

On construction sites where there is a break in elevation of 19 inches or more, and no ramp, runway, sloped embankment, or personnel hoist is provided, ______ may be used.

OSHA construction standards require ______ foot-candles of light in stairways.

The two basic types of scaffolds are ______.

The most common cause of death for equipment operators is _______.

To reduce the risk of workers being hurt or killed by falling materials, do not stack materials higher than a ______ height-to-base ratio.

A(n) ______ is a(n) ______ that is deeper than it is wide, and usually not wider than 15 feet.

Most cave-ins occur in trenches 5 to ______ feet deep and happen suddenly with little or no warning.

In every trench over four feet deep, there must be an exit every ______.

Observing proper safety precautions when working with and around electrical current is important because the human body ______.

A(n) is a(n) that is deeper than it is wide, and usually not wider than 15 feet.