Windows Server 2016 70-740 - Simulado VI

Question #02

You have a server named Server1. Server1 contains a volume that has Data Deduplication enabled.
You need to reduce the amount of memory allocated to the Data Deduplication process.
Which cmdlet should you run?

• Enabled-DedupVolume

• Update-Dedupstatus

• Set-DedupVolume

• Set-DedupSchedule

Question #03

You have a Hyper-V cluster that uses Cluster Shared Volumes (CSV). The cluster contains 20 virtual machines. Each virtual machine has a single disk.
You create a storage QoS policy that sets the minimum IOPS to 100 and the maximum IOPS to 200.
You need to ensure that the storage traffic of each virtual machine complies with the storage QoS policy.
What should you run?

• Set-VMHardDiskDrive

• Set-VM

• Set-VMHost

• Set-VHD

Question #04

HOTSPOT -
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 has the following configurations.

You need to enable nested virtualization for VM1.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• - The version
  - Set VMProcessor

• - The Generation
  - Set-VM

• - The NumaNodesCount
  - Set-VMBios

• -The ProcessorCount
  - Set-VMFirmware

• - The Version
  - Set-VMSecurity

Question #05

HOTSPOT -
You have a server named Server1.
You need to create a Storage Spaces-based volume that meets the following requirements:
✑ Provides the highest resiliency
✑ Provides storage tiering
Which storage configuration parameters should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• 6
  Mirros Layout and fixed provisioning

• 10
  Mirror layout and thin provisioning

• 12
  Partity layout and thin provisioning

• 14
  Mirros Layout and fixed provisioning

HOTSPOT -
Your network contains an Active Directory domain. The domain contains two servers named Server1 and Server2.
On Server1 and Server2, you use Windows Server Backup to create backups every day at 01:00 and 17:00. You configure Server1 to back up to a network share.
You configure Server2 to back up to a locally attached hard disk that is dedicated for backup.
The first backups are created on Monday at 01:00.
How many recovery points will be available for each server on Thursday at 14:00? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• Server1: 1
  Server2: 1

• Server1: 1
  Server2: 7

• Server1: 6
  Server2: 6

• Server1: 7
  Server2: 7

• Server1: 7
  Server2: 6

• Server1: 8
  Server2: 1

Question #10

You have a five-node failover cluster named Cluster1. All the nodes run Windows Server 2012 R2. All the nodes run on physical hardware.
You need to upgrade Cluster1 to Windows Server 2016. The solution must minimize administrative effort and costs.
What should you do first?

• Add a Windows Server 2016 node to Cluster1

• Create a new Windows Server 2016 failover cluster

• Enable Cluster-Aware updating (CAU) on Cluster1

• Drain and evict a node from Cluster1

Question #12

You are building a failover cluster named Cluster1.
You plan to add the following cluster roles to Cluster1:
✑ DHCP Server named DHCP1
✑ iSCSI Target Server named ISCSI1
✑ Scale-Out File Server named SOFS1
Which roles require a Cluster Shared Volumes (CSV) disk?

• ISCSI1 only

• SOFS1 and ISCSI1 only

• DHCP1, SOFS1, and ISCSI1

• SOFS1 only

Question #15

You have a server named Server1 that contains five volumes.
You install Data Deduplication on Server1.
You plan to enable Data Deduplication on volumes that can achieve a space saving of 50 percent or greater.
What should you run to identify on which volumes you should enable Data Deduplication?

• ddpeval.exe

• Optimize-Volume

• ddpcli.exe

• diskpart.exe

• Get-DedupVolume

Question #16

You have a file server named FS1 that contains 10 shared folders. The folders contain user data.
A new security requirement states that all data transmissions involving the user data must be encrypted.
You need to configure FS1 to meet the security requirement.
Which command should you run?

• Set-SmbServerConfiguration ""EncryptData $true

• Set-SmbServerConfiguration ""EnableSMB1Protocol $false

• Set-SmbClientConfiguration ""EnableInsecureGuestLogons $false

• Set-SmbClientConfiguration ""EnableSecuritySignature $true

Question #17

You have three servers named Server1, Server2, and Server3. The servers are members of a Network Load Balancing (NLB) cluster named Cluster1.
You need to configure the handling priority for the traffic on port 443.
What should you do in Network Load Balancing Manager?

• From the cluster properties, configure the host priority

• From the host properties, configure the Filtering mode of a port rule

• From the host properties, configure the host priority

• From the cluster properties, configure the Filtering mode of a port rule

Question #19

HOTSPOT -
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1 that has two network adapters.
You need to create a NIC team on VM1.
Which cmdlets should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• Server1: New-VMSwitch
  VM1: New-NetbfoTeam

• Server1: Set-VMNetworkAdapter
  VM1: New-NetLbfoTeam

• Server1: New-NetLbfoTeam
  VM1: Set-VMSwicthTeam

• Server1: New-VMSwitch
  VM1: Set-VMNetworkAdapter

• Server1: Set-VMNetworkAdapter
  VM1: New-VMSwitch

• Server1: Set-VMSwicthTeam
  VM1: New-NetbfoTeam

Question #20

HOTSPOT -
You have a server named Server1 that has Docker Engine "" Enterprise installed.
You create a container registry named Registry1 in a Microsoft Azure subscription.
You create a container image named image1 on Server1.
You need to store image1 in Registry1.
Which command should you run on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• docker push Registry1.Azurecr.io

• docker pull Registry1.Azurecr.io

• docker import Registry1.Azurecr.io

• docker Export Registry1.Azurecr.io

• docker push Registry1.Azurecr.blob.core.windows.net

• docker push Registry1.Azurecr.onmicrosoft.com

Question #24

You have a server named Server1 that runs Windows Server 2016.
You install the Server for NFS server role on Server1.
You need to ensure that you can create NFS shares on Server1 by using the NFS Share "" Advanced share profile.
Which additional server role should you install?

• File Server VSS Agent Service

• Work Folders

• File Server Resource Manager

• Print and Document Services

Question #25

HOTSPOT -
You have a Hyper-V failover cluster that consists of three nodes. Virtual machines are distributed evenly across the nodes.
You plan to restart each node during the upcoming week.
You need to ensure that after each restart, the virtual machines will be evenly distributed across the cluster. The solution must minimize the number of times the virtual machines are live-migrated across the nodes.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Question #26

Your network contains an Active Directory domain. The domain contains two servers named Server1 and Server2.
On Server1, you create a PowerShell Desired State Configuration (DSC) script stored in a file named Config.ps1.
You need to compile Config.ps1 so that the script can be applied to Server2 by using PowerShell DSC.
What should you run?

• mofcomp.exe

• Start-DscConfiguration

• Publish-DscConfiguration

• config.ps1

Question #30

You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

• Add-ClusterSharedVolume –Name "Disk 1" –Cluster Cluster1

• New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage

• Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk

• New-ClusterStorageEnclosure –id 1 –name Cluster1 –type jbod –ConnectionString "Server1,Server2,Server3,Server4"

Question #31

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

• the dns.exe command

• the optionalfeatures.exe command

• the Install-Package cmdlet

• the Enable-WindowsOptionalFeature cmdlet

Question #32

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

• Run the New-NetFirewallRule cmdlet

• Run the Set-ServiceWindows PowerShell cmdlet

• Edit the daemon.json file

• Edit the configuration json file

Question #33

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

• RunNew-SRPartnershipand specify the -RephcationMode

• install the Failover Clustering feature and create a new cluster resource group.

• Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).

• RunSet-DfsrServiceConfigurationand specify the -RPCPort

Question #34

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• Run the Set-Service cmdlet.

• Modify the Security settings of Dockerd.exe.

• Edit the Configuration.json file.

• Run the sc config command.

Question #35

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• Run the sc privsc ommand.

• Edit the Daemon.json file.

• Add Docker Administrators to the local Administrators group.

• Edit the Configuration.json file.

Question #36

You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers, 10 files servers, and eight domain controllers.
You need to implement a backup strategy that meets the following requirements:
✑ Backs up all servers
✑ Centralizes application-level backups
✑ Performs application-level backups
✑ Provides the ability to perform bare metal recovery
What should you use?

• Microsoft Azure VM Backup

• Microsoft Azure Backup Agent

• Windows Server Backup

• Microsoft Azure Backup Server

Question #37

You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

• Set-NetUDPSetting

• New-StorageQosPolicy

• Set-SmbBandwidthLimit

• Set-NetTCPSetting

uestion #38

You have a server named Server1 that runs Windows Server 2016.
Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1.
You need to extend Partition1.
What should you do first?

• From Windows PowerShell, run the Resize-VirtualDisk cmdlet.

• From Windows PowerShell, run the Resize-StorageTier cmdlet.

• From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.

• From Disk Management, modify the properties of Partition1.

• From Disk Management, extend a volume.

Question #39

You have Nano Setver image named Diskl .vhdx.
You mount Diskl .vhdx.
You need to add a folder that contains several files to the image.
Which tool or cmdlet you should use?

• Copy-Item

• Add-WindowsImage

• Add-WindowsPackage

• Edit-NanoServerImage

Question #40

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

• thedns.execommand

• theoptionalfeatures.execommand

• theInstall-Packagecmdlet

• theEnable-WindowsOptionalFeaturecmdlet

Question #41

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

• Run theNew-NetFirewallRule cmdlet

• Run the Set-ServiceWindows PowerShell cmdlet

• Edit the daemon.json file

• Edit the configuration json file

Question #42

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

• Run New-SRPartnership and specify the RephcationMode

• Install the Failover Clustering feature and create a new cluster resource group.

• Install the Failover Clustering feature and use Cluster SharedVolumes (CSV).

• Run Set-DfsrServiceConfiguration and specify the –RPCPort

Question #43

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• Run the sc privs command.

• Edit the Daemon.json file.

• Add Docker Administrators to the local Administrators group.

• Edit the Configuration.json file.

Question #44

You have a Hyper-V host that runs Windows Server 2016.
You need to identify the amount of processor resources consumed by Hyper-V and virtual machines.
Which counter should you use from Performance Monitor?

• \Hyper-V Hypervisor\Logical Processor

• \Hyper-V HypervisorRoot Virtual Processor(_Total)\% Guest Run Time

• \Hyper-V Hypervisor Virtual Processor(_Total)\% Hypervisor Run Time

• \Hyper-V Hypervisor Virtual Processor(_Total)\% Total Run Time

Question #45

You have a file server named Server1 that runs Windows Server 2016.
Object access auditing is configured on Server1.
You need to filter the Security event log to show all log entries that relate to a user named User1.
What should you do?

• Right-click the Security log, and then click Filter Current Log"¦ On the Filter tab, type a value in the User box.

• Right-click the Security log, and then click Filter Current Log"¦ On the Filter tab, select a value from the Event sources box.

• Right-click the Security log, and then click Create Custom View"¦ On the Filter tab, type a value in the User box.

• Right-click the Security log, and then click Filter Current Log"¦ On the XML tab, modify the QueryList entry and set an EventData tag.