PIM-SM uses a mechanism called ______ to test that the source IP address of a stream received on a port would be accessed in unicast back on the same port.
Reverse Path Forwarding
High speed configuration
Packet tracing
R.B.T
An audio stream is being served by Multicast, hosts that correctly connect to the stream are fed it via ________ transport layer protocol.
User Datagram Protocol
RTP
SIM-DIM
Transmission Control Protocol
The host uses [igmp] to join a multicast stream, and routers use [pim] to learn about available streams from upstream multicast routers.
Internet Group Management Protocol & Protocol Independent Multicast
Internet Group Management Protocol & Personal information manager
Internet Group Management Protocol & Product Information Management
The [pim-sm] multicast routing protocol is the most suitable protocol for routing multicast over Wide Area Networks (WAN).
Protocol-Independent Multicast Sparse Mode
Its a type it in answer, so make sure you know how to spell it!
Switches can be aware of multicast streams and behave accordingly if they are configured to use either ________ or _________.
ip-snooping or cgmp
Its a type it in job, make sure you know it!
Routers that have ports configured for ip pim sparse-dense-mode will randomly select PIM-SM or PIM-DM means of routing multicast.
What is the first [first_ip_addr] and last [last_ip_addr] IP address in the Multicast range of IPv4 addresses ?
224.0.0.0
239.255.255.255
224.0.0.5
224.255.255.255
When a router sends an IGMP Query on the LAN to the hosts, it sends it using [ip] address.
224.0.0.1
224.255.255.254
224.0.0.2
223.0.0.254
A Rendezvous Point (RV point) is required for which of the following Multicast routing protocols ?
PIM-DIM
DVMPR
PIM-SM
MOSPF
Both PIM-DM and PIM-SM
Match the milticast addresses to their function.
All Systems on the Subnet : 224.0.0.1
All OSPF Routers : 224.0.0.5
All PIM Routers : 224.0.0.13
All OSPF Designated Routers : 224.0.0.6
Al Routers on the subnet : 224.0.0.2
