The Linux application Net-SNMP function 'snmpwalk' will do what if no OID argument is given ?
If no OID argument is present, snmpwalk will search MIB-II and any configured Enterprise MIBs.
If no OID argument is present, snmpwalk will prompt the operator for an OID.
If no OID argument is present, snmpwalk will display the SNMP man page.
If no OID argument is present, snmpwalk will search MIB-II.
SNMPv1 SNMPv2c and SNMPv3 are all considered weak from a security perspective ?
An agent can send unsolicited traps to the manager, the SNMP ___ is used to perform this function.
PDU
GET
SET
TRAP
The SNMP function ___ attempts to change the value of an SNMP variable in the SNMP agent MIB.
The following is an example of an Enterprise MIB ? .iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysUpTime(3).0
The SNMP function ___ is used to poll an SNMP Agent entity for the value of some SNMP variable.
The TCP/IP MIB divides information into the following categories, and each variable included in this information must fall in one of them.
system
egp
ip
icmp
none of these
interfaces
tcp
udp
addr-translation
The TCP/IP ________________ __________________ ________________ (MIB) is defined in RFC-1213. It divides the information a TCP/IP device should maintain into eight categories, and each variable included in this information must fall in one of them.
Management
Information
Base
Baseline
____________ ___________________ ________________ (SNMP) initial aim was to integrate the management of different types of networks with a simple design that caused very little stress on the network.
Simple
Network
Protocol
Saddist
The SNMP TRAP is sent by the SNMP agent to the SNMP Managers UDP port _____ while the SNMP SET and GET use UDP port ______ .
161 - SET/GET 162 - TRAP
1812 - SET/GET 1813 - TRAP
59 - SET/GET 62 - TRAP
