AZ - 104 Simulado IV

Este Quiz é cronometrado.

Você tem 2 horas para completar as 60 questões deste quiz..

Começar o Quiz

Por favor, aguarde! Carregando...

Questão 1 de 60

Question #01 Pagina24 - 39

You have an Azure subscription named Subscription1 that contains the resources shown in the following table.

You create virtual machines in Subscription1 as shown in the following table.

You plan to use Vault1 for the backup of as many virtual machines as possible.
Which virtual machines can be backed up to Vault1?

Selecione uma das seguintes:

VM1 only
VM3 and VMC only
VM1, VM2, VM3, VMA, VMB, and VMC
VM1, VM3, VMA, and VMC only
VM1 and VM3 only

Explicação

Questão 2 de 60

Question #02 Pagina25 - 40

You have an Azure Kubernetes Service (AKS) cluster named AKS1.
You need to configure cluster autoscaler for AKS1.
Which two tools should you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

Selecione uma ou mais das seguintes:

the kubectl command
the az aks command
the Set-AzVm cmdlet
the Azure portal
the Set-AzAks cmdlet

Explicação

Questão 3 de 60

Question #03 Pagina25 - 41

You create the following resources in an Azure subscription:
✑ An Azure Container Registry instance named Registry1
✑ An Azure Kubernetes Service (AKS) cluster named Cluster1
You create a container image named App1 on your administrative workstation.
You need to deploy App1 to Cluster1.
What should you do first?

Selecione uma das seguintes:

Run the docker push command.
Create an App Service plan.
Run the az acr build command.
Run the az aks create command.

Explicação

Questão 4 de 60

Question #04 Pagina25 - 42

You have an Azure subscription that contains the resources shown in the following table.

You need to configure a proximity placement group for VMSS1.
Which proximity placement groups should you use?

Selecione uma das seguintes:

Proximity2 only
Proximity1, Proximity2, and Proximity3
Proximity1 only
Proximity1 and Proximity3 only

Explicação

Questão 5 de 60

Question #05 Pagina25 - 43

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Resource providers.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 6 de 60

Question #06 Pagina25 - 44

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the RG1 blade, you click Automation script.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 7 de 60

Question #07 Pagina26 - 45

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the RG1 blade, you click Deployments.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 8 de 60

Question #08 Pagina26 - 46

You have an Azure subscription named Subscription1.
You deploy a Linux virtual machine named VM1 to Subscription1.
You need to monitor the metrics and the logs of VM1.
What should you use?

Selecione uma das seguintes:

Azure HDInsight
Linux Diagnostic Extension (LAD) 3.0
the AzurePerformanceDiagnostics extension
Azure Analysis Services

Explicação

Questão 9 de 60

Question #09 Pagina26 - 47

HOTSPOT -
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1.
You install and configure a web server and a DNS server on VM1.
VM1 has the effective network security rules shown in the following exhibit:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: Can connect to only the web server on VM1
Box 2: Can connect to only the web server and the DNS server onVM1

Explicação

Questão 10 de 60

Question #10 Pagina26 - 48

You plan to deploy three Azure virtual machines named VM1, VM2, and VM3. The virtual machines will host a web app named App1.
You need to ensure that at least two virtual machines are available if a single Azure datacenter becomes unavailable.
What should you deploy?

Selecione uma das seguintes:

all three virtual machines in a single Availability Zone
all virtual machines in a single Availability Set
each virtual machine in a separate Availability Zone
each virtual machine in a separate Availability Set

Explicação

Questão 11 de 60

Question #11 Pagina26 - 49

You have an Azure virtual machine named VM1 that runs Windows Server 2019.
You save VM1 as a template named Template1 to the Azure Resource Manager library.
You plan to deploy a virtual machine named VM2 from Template1.
What can you configure during the deployment of VM2?

Selecione uma das seguintes:

operating system
administrator username
virtual machine size
resource group

Explicação

Questão 12 de 60

Question #12 Pagina27 - 50

You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs a financial reporting app named App1 that does not support multiple active instances.
At the end of each month, CPU usage for VM1 peaks when App1 runs.
You need to create a scheduled runbook to increase the processor performance of VM1 at the end of each month.
What task should you include in the runbook?

Selecione uma das seguintes:

Add the Azure Performance Diagnostics agent to VM1.
Modify the VM size property of VM1.
Add VM1 to a scale set.
Increase the vCPU quota for the subscription.
Add a Desired State Configuration (DSC) extension to VM1.

Explicação

Questão 13 de 60

Question #13 Pagina27 - 51

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an Azure Resource Manager template.
You need to ensure that NGINX is available on all the virtual machines after they are deployed.
What should you use?

Selecione uma das seguintes:

Deployment Center in Azure App Service
A Desired State Configuration (DSC) extension
the New-AzConfigurationAssignment cmdlet
a Microsoft Intune device configuration profile

Explicação

Questão 14 de 60

Question #14 Pagina27 - 52

HOTSPOT -
You deploy an Azure Kubernetes Service (AKS) cluster that has the network profile shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: 10.244.0.0/16
Box 2: 10.0.0.0/16

Explicação

Questão 15 de 60

Question #15 Pagina27 - 53

HOTSPOT -
You have the App Service plan shown in the following exhibit.

The scale-in settings for the App Service plan are configured as shown in the following exhibit.

The scale out rule is configured with the same duration and cool down tile as the scale in rule.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: 2
Box 2: 4

Explicação

Questão 16 de 60

Question #16 Pagina27 - 54

You have an Azure virtual machine named VM1 that runs Windows Server 2019. The VM was deployed using default drive settings.
You sign in to VM1 as a user named User1 and perform the following actions:
✑ Create files on drive C.
✑ Create files on drive D.
✑ Modify the screen saver timeout.
✑ Change the desktop background.
You plan to redeploy VM1.
Which changes will be lost after you redeploy VM1?

Selecione uma das seguintes:

the modified screen saver timeout
the new desktop background
the new files on drive D
the new files on drive C

Explicação

Questão 17 de 60

Question #17 Pagina28 - 55

You have an Azure subscription.
You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit tab.)

You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.
What should you modify on VM1?

Selecione uma das seguintes:

the memory
the network adapters
the hard drive
the processor
Integration Services

Explicação

Questão 18 de 60

Question #18 Pagina28 - 56

HOTSPOT -
You have an Azure subscription that contains a virtual machine scale set. The scale set contains four instances that have the following configurations:
✑ Operating system: Windows Server 2016
✑ Size: Standard_D1_v2
You run the get-azvmss cmdlet as shown in the following exhibit:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: 4
Box 2: 1

Explicação

Questão 19 de 60

Question #19 Pagina28 - 57

You have an Azure subscription named Subscription1 that is used by several departments at your company. Subscription1 contains the resources in the following table:

Another administrator deploys a virtual machine named VM1 and an Azure Storage account named storage2 by using a single Azure Resource Manager template.
You need to view the template used for the deployment.
From which blade can you view the template that was used for the deployment?

Selecione uma das seguintes:

VM1
RG1
storage2
container1

Explicação

Questão 20 de 60

Question #20 Pagina28 - 58

You have an Azure web app named App1. App1 has the deployment slots shown in the following table:

In webapp1-test, you test several changes to App1.
You back up App1.
You swap webapp1-test for webapp1-prod and discover that App1 is experiencing performance issues.
You need to revert to the previous version of App1 as quickly as possible.
What should you do?

Selecione uma das seguintes:

Redeploy App1
Swap the slots
Clone App1
Restore the backup of App1

Explicação

Questão 21 de 60

Question #21 Pagina28 - 59

HOTSPOT -
You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual machines VM1 and VM2. VM1 and VM2 run Windows Server
2016.
VM1 is backed up daily by Azure Backup without using the Azure Backup agent.
VM1 is affected by ransomware that encrypts data.
You need to restore the latest backup of VM1.
To which location can you restore the backup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: Any Windows computer that has Internet connectivity
Box 2: VM1 or a new Azure virtual machine only

Explicação

Questão 22 de 60

Question #22

You plan to back up an Azure virtual machine named VM1.
You discover that the Backup Pre-Check status displays a status of Warning.
What is a possible cause of the Warning status?

Selecione uma das seguintes:

VM1 is stopped.
VM1 does not have the latest version of the Azure VM Agent (WaAppAgent.exe) installed.
VM1 has an unmanaged disk.
A Recovery Services vault is unavailable.

Explicação

Questão 23 de 60

Question #23

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Overview blade, you move the virtual machine to a different resource group.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 24 de 60

Question #24

You have an Azure subscription.
You plan to use Azure Resource Manager templates to deploy 50 Azure virtual machines that will be part of the same availability set.
You need to ensure that as many virtual machines as possible are available if the fabric fails or during servicing.
How should you configure the template? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Explicação

Questão 25 de 60

Question #25

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1 that runs Windows Server 2016.
You need to create an alert in Azure when more than two error events are logged to the System event log on VM1 within an hour.
Solution: You create an Azure Log Analytics workspace and configure the Agent configuration settings. You install the Microsoft Monitoring Agent on VM1. You create an alert in Azure Monitor and specify the Log Analytics workspace as the source.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 26 de 60

Question #26

HOTSPOT -
You have an Azure subscription.
You deploy a virtual machine scale set that is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Explicação

Questão 27 de 60

Question #27

You have web apps in the West US, Central US and East US Azure regions.
You have the App Service plans shown in the following table.

You plan to create an additional App Service plan named ASP5 that will use the Linux operating system.
You need to identify in which of the currently used locations you can deploy ASP5.
What should you recommend?

Selecione uma das seguintes:

West US, Central US, or East US
Central US only
East US only
West US only

Explicação

Questão 28 de 60

Question #28

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an Azure Resource Manager template.
You need to ensure that NGINX is available on all the virtual machines after they are deployed.
What should you use?

Selecione uma das seguintes:

the New-AzConfigurationAssignment cmdlet
a Desired State Configuration (DSC) extension
Azure Active Directory (Azure AD) Application Proxy
Azure Application Insights

Explicação

Questão 29 de 60

Question #29

HOTSPOT -
You have an Azure subscription that contains the resources shown in the following table.

In Azure Cloud Shell, you need to create a virtual machine by using an Azure Resource Manager (ARM) template.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Explicação

Questão 30 de 60

Question #30 Pagina29 - 01
HOTSPOT -
You have an Azure subscription that contains a virtual network named VNet1. VNet1 uses an IP address space of 10.0.0.0/16 and contains the VPN Gateway and subnets in the following table:

Subnet1 contains a virtual appliance named VM1 that operates as a router.
You create a routing table named RT1.
You need to route all inbound traffic from the VPN gateway to VNet1 through VM1.
How should you configure RT1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: 10.0.0.0/16
Box 2: Virtual appliance
Box 3: Gateway Subnet

Explicação

Questão 31 de 60

Question #31 Pagina29 - 02

You have five Azure virtual machines that run Windows Server 2016. The virtual machines are configured as web servers.
You have an Azure load balancer named LB1 that provides load balancing services for the virtual machines.
You need to ensure that visitors are serviced by the same web server for each request.
What should you configure?

Selecione uma das seguintes:

Floating IP (direct server return) to Enabled
Floating IP (direct server return) to Disabled
a health probe
Session persistence to Client IP and Protocol

Explicação

Questão 32 de 60

Question #32 Pagina29 - 03

HOTSPOT -
You have an Azure subscription that contains the virtual machines shown in the following table:

VM1 and VM2 use public IP addresses. From Windows Server 2019 on VM1 and VM2, you allow inbound Remote Desktop connections.
Subnet1 and Subnet2 are in a virtual network named VNET1.
The subscription contains two network security groups (NSGs) named NSG1 and NSG2. NSG1 uses only the default rules.
NSG2 uses the default rules and the following custom incoming rule:
✑ Priority: 100
✑ Name: Rule1
✑ Port: 3389
✑ Protocol: TCP
✑ Source: Any
✑ Destination: Any
✑ Action: Allow
NSG1 is associated to Subnet1. NSG2 is associated to the network interface of VM2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: No
Box 2: Yes
Box 3: Yes

Explicação

Questão 33 de 60

Question #33 Pagina29 - 04

You have a virtual network named VNET1 that contains the subnets shown in the following table:

You have two Azure virtual machines that have the network configurations shown in the following table:

For NSG1, you create the inbound security rule shown in the following table:

For NSG2, you create the inbound security rule shown in the following table:

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

No, Yes, Yes

Explicação

Questão 34 de 60

Question #34 Pagina29 - 05

You have an Azure subscription named Subscription1.
Subscription1 contains the virtual machines in the following table:

Subscription1 contains a virtual network named VNet1 that has the subnets in the following table:

VM3 has multiple network adapters, including a network adapter named NIC3. IP forwarding is enabled on NIC3. Routing is enabled on VM3.
You create a route table named RT1 that contains the routes in the following table:

You apply RT1 to Subnet1 and Subnet2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: Yes
Box 2: No
Box 3: Yes

Explicação

Questão 35 de 60

Question #35 Pagina30 - 06

Your on-premises network contains an SMB share named Share1.
You have an Azure subscription that contains the following resources:
✑ A web app named webapp1
✑ A virtual network named VNET1
You need to ensure that webapp1 can connect to Share1.
What should you deploy?

Selecione uma das seguintes:

an Azure Application Gateway
an Azure Active Directory (Azure AD) Application Proxy
an Azure Virtual Network Gateway

Explicação

Questão 36 de 60

Question #36 Pagina30 - 07

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an Azure Resource Manager template.
You need to ensure that NGINX is available on all the virtual machines after they are deployed.
What should you use?

Selecione uma das seguintes:

the Publish-AzVMDscConfiguration cmdlet
Azure Application Insights
Azure Custom Script Extension
the New-AzConfigurationAssignement cmdlet

Explicação

Questão 37 de 60

Question #37 Pagina30 - 08

You have an Azure subscription named Sub1.
You plan to deploy a multi-tiered application that will contain the tiers shown in the following table.

You need to recommend a networking solution to meet the following requirements:
✑ Ensure that communication between the web servers and the business logic tier spreads equally across the virtual machines.
✑ Protect the web servers from SQL injection attacks.
Which Azure resource should you recommend for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: an internal load balancer
Box 2: an application gateway that uses the WAF tier

Explicação

Questão 38 de 60

Question #38 Pagina30 - 09

Your company has three offices. The offices are located in Miami, Los Angeles, and New York. Each office contains datacenter.
You have an Azure subscription that contains resources in the East US and West US Azure regions. Each region contains a virtual network. The virtual networks are peered.
You need to connect the datacenters to the subscription. The solution must minimize network latency between the datacenters.
What should you create?

Selecione uma das seguintes:

three Azure Application Gateways and one On-premises data gateway
three virtual hubs and one virtual WAN
three virtual WANs and one virtual hub
three On-premises data gateways and one Azure Application Gateway

Explicação

Questão 39 de 60

Question #39 Pagina30 - 10

HOTSPOT -
You plan to deploy five virtual machines to a virtual network subnet.
Each virtual machine will have a public IP address and a private IP address.
Each virtual machine requires the same inbound and outbound security rules.
What is the minimum number of network interfaces and network security groups that you require? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box1: 5
Box2: 1

Explicação

Questão 40 de 60

Question #40

You have an Azure subscription that contains the resources shown in the following table.

LB1 is configured as shown in the following table.

You plan to create new inbound NAT rules that meet the following requirements:
✑ Provide Remote Desktop access to VM1 from the internet by using port 3389.
✑ Provide Remote Desktop access to VM2 from the internet by using port 3389.
What should you create on LB1 before you can create the new inbound NAT rules?

Selecione uma das seguintes:

a frontend IP address
a load balancing rule
a health probe
a backend pool

Explicação

Questão 41 de 60

Question #41 Pagina31 - 11

HOTSPOT -
You have Azure virtual machines that run Windows Server 2019 and are configured as shown in the following table.

You create a private Azure DNS zone named adatum.com. You configure the adatum.com zone to allow auto registration from VNET1.
Which A records will be added to the adatum.com zone for each virtual machine? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: Private IP address only
Box 2: Private IP address only

Explicação

Questão 42 de 60

Question #42 Pagina31 - 12

You have an Azure virtual network named VNet1 that connects to your on-premises network by using a site-to-site VPN. VNet1 contains one subnet named
Sunet1.
Subnet1 is associated to a network security group (NSG) named NSG1. Subnet1 contains a basic internal load balancer named ILB1. ILB1 has three Azure virtual machines in the backend pool.
You need to collect data about the IP addresses that connects to ILB1. You must be able to run interactive queries from the Azure portal against the collected data.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: An Azure Log Analytics workspace
Box 2: NSG1

Explicação

Questão 43 de 60

Question #43 Pagina31 - 13
You have the Azure virtual networks 3shown in the following table.

To which virtual networks can you establish a peering connection from VNet1?

Selecione uma das seguintes:

VNet2 andVNet3 only
VNet2 only
VNet3 and VNet4 only
VNet2, VNet3, and VNet4

Explicação

Questão 44 de 60

Question #44 Pagina31 - 14

You have an Azure subscription that contains a virtual network named VNet1. VNet1 contains four subnets named Gateway, Perimeter, NVA, and Production.
The NVA subnet contains two network virtual appliances (NVAs) that will perform network traffic inspection between the Perimeter subnet and the Production subnet.
You need to implement an Azure load balancer for the NVAs. The solution must meet the following requirements:
✑ The NVAs must run in an active-active configuration that uses automatic failover.
✑ The load balancer must load balance traffic to two services on the Production subnet. The services have different IP addresses.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Selecione uma ou mais das seguintes:

Deploy a basic load balancer
Deploy a standard load balancer
Add two load balancing rules that have HA Ports and Floating IP enabled
Add two load balancing rules that have HA Ports enabled and Floating IP disabled
Add a frontend IP configuration, a backend pool, and a health probe
Add a frontend IP configuration, two backend pools, and a health probe

Explicação

Questão 45 de 60

Question #45 Pagina31 - 15

You have an Azure subscription named Subscription1 that contains two Azure virtual networks named VNet1 and VNet2. VNet1 contains a VPN gateway named
VPNGW1 that uses static routing. There is a site-to-site VPN connection between your on-premises network and VNet1.
On a computer named Client1 that runs Windows 10, you configure a point-to-site VPN connection to VNet1.
You configure virtual network peering between VNet1 and VNet2. You verify that you can connect to VNet2 from the on-premises network. Client1 is unable to connect to VNet2.
You need to ensure that you can connect Client1 to VNet2.
What should you do?

Selecione uma das seguintes:

Download and re-install the VPN client configuration package on Client1.
Select Allow gateway transit on VNet1.
Select Allow gateway transit on VNet2.
Enable BGP on VPNGW1

Explicação

Questão 46 de 60

Question #46 Pagina32 - 16

HOTSPOT -
You have an Azure subscription. The subscription contains virtual machines that run Windows Server 2016 and are configured as shown in the following table.

You create a public Azure DNS zone named adatum.com and a private Azure DNS zone named contoso.com.
You create a virtual network link for contoso.com as shown in the following exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: Yes
Auto registration is enabled for private Azure DNS zone named contoso.com.

Box 2: Yes
Auto registration is enabled for private Azure DNS zone named contoso.com.

Box 3: No
None of the VM will auto-register to the public Azure DNS zone named adatum.com

Explicação

Questão 47 de 60

Question #47 Pagina32 - 17

You have an Azure subscription that contains the resources in the following table.

To which subnets can you apply NSG1?

Selecione uma das seguintes:

the subnets on VNet1 only
the subnets on VNet2 and VNet3 only
the subnets on VNet2 only
the subnets on VNet3 only
the subnets on VNet1, VNet2, and VNet3

Explicação

Questão 48 de 60

Question #48 Pagina32 - 18

DRAG DROP -
You have an Azure subscription that contains two virtual networks named VNet1 and VNet2. Virtual machines connect to the virtual networks.
The virtual networks have the address spaces and the subnets configured as shown in the following table.

You need to add the address space of 10.33.0.0/16 to VNet1. The solution must ensure that the hosts on VNet1 and VNet2 can communicate.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Selecione uma das seguintes:

Step 1: Remove peering between Vnet1 and VNet2.

Step 2: Add the 10.33.0.0/16 address space to VNet1

Step 3: Recreate peering between VNet1 and VNet2

Explicação

Questão 49 de 60

Question #49 Pagina32 - 19

HOTSPOT -
You have an Azure subscription that contains the resource groups shown in the following table.

RG1 contains the resources shown in the following table.

VM1 is running and connects to NIC1 and Disk1. NIC1 connects to VNET1.
RG2 contains a public IP address named IP2 that is in the East US location. IP2 is not assigned to a virtual machine.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

Box 1: Yes
Box 2: Yes
Box 3: No

Explicação

Questão 50 de 60

Question #50 Pagina32 - 20

You have an Azure web app named webapp1.
You have a virtual network named VNET1 and an Azure virtual machine named VM1 that hosts a MySQL database. VM1 connects to VNET1.
You need to ensure that webapp1 can access the data hosted on VM1.
What should you do?

Selecione uma das seguintes:

Deploy an internal load balancer
Peer VNET1 to another virtual network
Connect webapp1 to VNET1
Deploy an Azure Application Gateway

Explicação

Questão 51 de 60

Question #51 Pagina33 - 21

You create an Azure VM named VM1 that runs Windows Server 2019.
VM1 is configured as shown in the exhibit. (Click the Exhibit tab.)

You need to enable Desired State Configuration for VM1.
What should you do first?

Selecione uma das seguintes:

Connect to VM1.
Start VM1.
Capture a snapshot of VM1.
Configure a DNS name for VM1

Explicação

Questão 52 de 60

Question #52 Pagina33 - 22

You have five Azure virtual machines that run Windows Server 2016. The virtual machines are configured as web servers.
You have an Azure load balancer named LB1 that provides load balancing services for the virtual machines.
You need to ensure that visitors are serviced by the same web server for each request.
What should you configure?

Selecione uma das seguintes:

Floating IP (direct server return) to Disabled
Session persistence to None
Floating IP (direct server return) to Enabled
Session persistence to Client IP

Explicação

Questão 53 de 60

Question #53 Pagina33 - 23

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
✑ A virtual network that has a subnet named Subnet1
✑ Two network security groups (NSGs) named NSG-VM1 and NSG-Subnet1
✑ A virtual machine named VM1 that has the required Windows Server configurations to allow Remote Desktop connections
NSG-Subnet1 has the default inbound security rules only.
NSG-VM1 has the default inbound security rules and the following custom inbound security rule:
✑ Priority: 100
✑ Source: Any
✑ Source port range: *
✑ Destination: *
✑ Destination port range: 3389
✑ Protocol: UDP
✑ Action: Allow
VM1 has a public IP address and is connected to Subnet1. NSG-VM1 is associated to the network interface of VM1. NSG-Subnet1 is associated to Subnet1.
You need to be able to establish Remote Desktop connections from the internet to VM1.
Solution: You add an inbound security rule to NSG-Subnet1 that allows connections from the Any source to the *destination for port range 3389 and uses the TCP protocol. You remove NSG-VM1 from the network interface of VM1.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 54 de 60

Question #54 Pagina33 - 24

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
✑ A virtual network that has a subnet named Subnet1
✑ Two network security groups (NSGs) named NSG-VM1 and NSG-Subnet1
✑ A virtual machine named VM1 that has the required Windows Server configurations to allow Remote Desktop connections
NSG-Subnet1 has the default inbound security rules only.
NSG-VM1 has the default inbound security rules and the following custom inbound security rule:
✑ Priority: 100
✑ Source: Any
✑ Source port range: *
✑ Destination: *

Destination port range: 3389 -

✑ Protocol: UDP
✑ Action: Allow
VM1 has a public IP address and is connected to Subnet1. NSG-VM1 is associated to the network interface of VM1. NSG-Subnet1 is associated to Subnet1.
You need to be able to establish Remote Desktop connections from the internet to VM1.
Solution: You add an inbound security rule to NSG-Subnet1 that allows connections from the internet source to the VirtualNetwork destination for port range 3389 and uses the UDP protocol.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 55 de 60

Question #55 Pagina33 - 25

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
✑ A virtual network that has a subnet named Subnet1
✑ Two network security groups (NSGs) named NSG-VM1 and NSG-Subnet1
✑ A virtual machine named VM1 that has the required Windows Server configurations to allow Remote Desktop connections
NSG-Subnet1 has the default inbound security rules only.
NSG-VM1 has the default inbound security rules and the following custom inbound security rule:
✑ Priority: 100
✑ Source: Any
✑ Source port range: *
✑ Destination: *
✑ Destination port range: 3389
✑ Protocol: UDP
✑ Action: Allow
VM1 has a public IP address and is connected to Subnet1. NSG-VM1 is associated to the network interface of VM1. NSG-Subnet1 is associated to Subnet1.
You need to be able to establish Remote Desktop connections from the internet to VM1.
Solution: You add an inbound security rule to NSG-Subnet1 and NSG-VM1 that allows connections from the internet source to the VirtualNetwork destination for port range 3389 and uses the TCP protocol.
Does this meet the goal?

Selecione uma das opções:

VERDADEIRO
FALSO

Explicação

Questão 56 de 60

Question #56 Pagina34 - 26

HOTSPOT -
You have a virtual network named VNet1 that has the configuration shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecione uma das seguintes:

1: add an address space
2: add a subnet

Explicação

Questão 57 de 60

Question #57 Pagina34 - 27

You have an Azure subscription that contains a virtual network named VNET1. VNET1 contains the subnets shown in the following table.

Each virtual machine uses a static IP address.
You need to create network security groups (NSGs) to meet following requirements:
✑ Allow web requests from the internet to VM3, VM4, VM5, and VM6.
✑ Allow all connections between VM1 and VM2.
✑ Allow Remote Desktop connections to VM1.
✑ Prevent all other network traffic to VNET1.
What is the minimum number of NSGs you should create?

Selecione uma das seguintes:

Explicação

Questão 58 de 60

Question #58 Pagina34 - 28

You have an Azure subscription that contains the resources shown in the following table.

The Not allowed resource types Azure policy that has policy enforcement enabled is assigned to RG1 and uses the following parameters:
Microsoft.Network/virtualNetworks
Microsoft.Compute/virtualMachines
In RG1, you need to create a new virtual machine named VM2, and then connect VM2 to VNET1.
What should you do first?

Selecione uma das seguintes:

Remove Microsoft.Compute/virtualMachines from the policy.
Create an Azure Resource Manager template
Add a subnet to VNET1.
Remove Microsoft.Network/virtualNetworks from the policy.

Explicação

Questão 59 de 60

Question #59 Pagina34 - 29

Your company has an Azure subscription named Subscription1.
The company also has two on-premises servers named Server1 and Server2 that run Windows Server 2016. Server1 is configured as a DNS server that has a primary DNS zone named adatum.com. Adatum.com contains 1,000 DNS records.
You manage Server1 and Subscription1 from Server2. Server2 has the following tools installed:
✑ The DNS Manager console
✑ Azure PowerShell
✑ Azure CLI 2.0
You need to move the adatum.com zone to an Azure DNS zone in Subscription1. The solution must minimize administrative effort.
What should you use?

Selecione uma das seguintes:

Azure CLI
Azure PowerShell
the Azure portal
the DNS Manager console

Explicação

Questão 60 de 60

Question #60 Pagina34 - 30

You have a public load balancer that balances ports 80 and 443 across three virtual machines named VM1, VM2, and VM3.
You need to direct all the Remote Desktop Protocol (RDP) connections to VM3 only.
What should you configure?

Selecione uma das seguintes:

an inbound NAT rule
a new public load balancer for VM3
a frontend IP configuration
a load balancing rule

Explicação

["https://cdn.goconqr.com/uploads/media/image/43765958/desktop_e870b5a0-b8b0-4c57-94f5-430604cfb816.PNG","https://cdn.goconqr.com/uploads/media/image/43765952/desktop_8cc3c3fb-13ab-4c5d-8d35-487f504a3059.png","https://cdn.goconqr.com/uploads/media/image/43766016/desktop_9eb77dd8-fc8f-47bb-bfa9-ffa5c1c39794.png","https://cdn.goconqr.com/uploads/media/image/43766151/desktop_f13d6944-7939-421a-92ad-5d71c4822bd8.PNG","https://cdn.goconqr.com/uploads/media/image/43766222/desktop_983cc403-c641-406a-b5a3-6ba7c18db2fa.png","https://cdn.goconqr.com/uploads/media/image/43766239/desktop_dc69a34b-8cea-4caa-9f1b-ac4812fefc74.png","https://cdn.goconqr.com/uploads/media/image/43766311/desktop_f3360f03-c6b7-43fb-b4d0-1acebb7a53dc.png","https://cdn.goconqr.com/uploads/media/image/43807775/desktop_4555f6ca-5570-42e6-916c-1ff7c7ac6c41.png","https://cdn.goconqr.com/uploads/media/image/43807895/desktop_41ac64ed-f96c-4bcb-8d56-bd92a44d6d8b.png","https://cdn.goconqr.com/uploads/media/image/43807954/desktop_caa5e2ee-ddcc-4d3d-a385-508ac069445c.png","https://cdn.goconqr.com/uploads/media/image/43808011/desktop_bfece76f-f50e-4ad4-bd6b-5375f9c4a672.png","https://cdn.goconqr.com/uploads/media/image/43808069/desktop_c7792151-8cf6-48e5-8e92-c5e55c29785d.PNG","https://cdn.goconqr.com/uploads/media/image/43808152/desktop_19d02d9b-ccda-4a9f-83cc-67ac86d1c4f1.PNG","https://cdn.goconqr.com/uploads/media/image/43808206/desktop_78898221-e494-4c75-8645-8ab126404a72.png","https://cdn.goconqr.com/uploads/media/image/43808276/desktop_5de8ce74-7123-48dd-9602-7863c0c7311d.PNG","https://cdn.goconqr.com/uploads/media/image/43821548/desktop_ca8496d5-09cf-4894-9611-525e3ecf77fc.png","https://cdn.goconqr.com/uploads/media/image/43830579/desktop_ec445357-84b4-4ead-bb7e-2a4676295ee4.PNG","https://cdn.goconqr.com/uploads/media/image/43830669/desktop_33caeba0-d9b9-409a-b976-f823e4be4cab.png","https://cdn.goconqr.com/uploads/media/image/43830732/desktop_8e11766f-45d7-44c4-898c-ba632cbd5bb0.PNG","https://cdn.goconqr.com/uploads/media/image/46485931/desktop_788ff84f-028b-48cb-a37c-8f1bd0428e05.png","https://cdn.goconqr.com/uploads/media/image/46581498/desktop_0e0ade41-f370-4387-85e2-3dfce86ebf2e.jpg","https://cdn.goconqr.com/uploads/media/image/43855602/desktop_6d4cb094-a905-4f12-92c6-34b473031f06.png","https://cdn.goconqr.com/uploads/media/image/43766030/desktop_b576e2a4-d593-4f37-8341-3a915b9c4528.png","https://cdn.goconqr.com/uploads/media/image/43766029/desktop_7c7eff0b-5390-488b-8bed-5c88fe7b58ed.png","https://cdn.goconqr.com/uploads/media/image/43766136/desktop_f5f69f2b-a7dd-4a63-b627-16d4c4017cb2.png","https://cdn.goconqr.com/uploads/media/image/43766135/desktop_485afcc4-4faf-44a4-aea5-e48fa4eeaa58.png","https://cdn.goconqr.com/uploads/media/image/43766157/desktop_708949af-eb5b-458a-a67b-95c6c7f00026.png","https://cdn.goconqr.com/uploads/media/image/43766183/desktop_9760ba14-91ae-4c3e-b495-37cddc06c2b4.PNG","https://cdn.goconqr.com/uploads/media/image/43766279/desktop_0b9a114f-c2ae-4679-9eed-9b021c3ea4d8.png","https://cdn.goconqr.com/uploads/media/image/43766280/desktop_83316423-ba26-4cc4-990c-6d83ccdce8f4.PNG","https://cdn.goconqr.com/uploads/media/image/43807579/desktop_ece78cb3-c3ce-4892-90cb-094ecf9b6d4f.png","https://cdn.goconqr.com/uploads/media/image/43807580/desktop_3179bad4-0916-4594-be0b-cee5bced505a.PNG","https://cdn.goconqr.com/uploads/media/image/43807676/desktop_c10d01c0-5e3e-4678-b5f1-b7dedae16532.png","https://cdn.goconqr.com/uploads/media/image/43807679/desktop_63fa414e-675e-4c24-953d-118178a8db2a.png","https://cdn.goconqr.com/uploads/media/image/43807774/desktop_28d0c242-674a-4c0a-a684-5ee6dc0d626d.png","https://cdn.goconqr.com/uploads/media/image/43807773/desktop_45e1cbf4-26eb-4be5-aa7b-b32a17b31a32.png","https://cdn.goconqr.com/uploads/media/image/43807897/desktop_847f967d-8bb7-4b44-b67e-088097cef5fe.png","https://cdn.goconqr.com/uploads/media/image/43807896/desktop_65d27a91-bc4a-4de9-b30c-bdd21ede8b5d.png","https://cdn.goconqr.com/uploads/media/image/43807956/desktop_432623a2-cfd0-43af-928a-bcfb703a272d.png","https://cdn.goconqr.com/uploads/media/image/43807953/desktop_76777e7f-1344-4c2c-a1e7-5502d7790b75.png","https://cdn.goconqr.com/uploads/media/image/43808013/desktop_0f247c49-7dc3-4964-b91c-21147a9e6b60.png","https://cdn.goconqr.com/uploads/media/image/43808012/desktop_daf71e81-fbbf-485b-b4ef-01a5382c0bb7.png","https://cdn.goconqr.com/uploads/media/image/43808067/desktop_049c5138-951e-4a63-8560-22c10a4686ad.png","https://cdn.goconqr.com/uploads/media/image/43808068/desktop_3a52def0-df23-452d-b93c-efbd4b192982.PNG","https://cdn.goconqr.com/uploads/media/image/43808151/desktop_b5b78183-83d0-4324-9bc0-8c7d19606131.png","https://cdn.goconqr.com/uploads/media/image/43808150/desktop_5bc0a7e6-39cd-4fa5-8d56-1df4e6b21d16.png","https://cdn.goconqr.com/uploads/media/image/43808208/desktop_6fe732be-6703-46e0-bcd7-66caa435da1d.png","https://cdn.goconqr.com/uploads/media/image/43808207/desktop_1672641a-b1b3-4bee-bc79-0ae8b889da56.png","https://cdn.goconqr.com/uploads/media/image/43808247/desktop_a7d672fa-e923-4b9e-887b-7ec1c7e9fd79.png","https://cdn.goconqr.com/uploads/media/image/43808246/desktop_243cf415-a52a-4a70-a305-7e97055b3f8d.png","https://cdn.goconqr.com/uploads/media/image/43821546/desktop_8cba073f-78fa-4d70-8453-9696a3275841.png","https://cdn.goconqr.com/uploads/media/image/43821547/desktop_142a6470-24d2-4f4e-8162-7d3c73ffdf14.png","https://cdn.goconqr.com/uploads/media/image/43830253/desktop_b4108469-af5c-427e-acb2-fc485f3fe8e8.png","https://cdn.goconqr.com/uploads/media/image/43830254/desktop_ecc5d181-364e-4079-87a4-e3fa26b06309.png","https://cdn.goconqr.com/uploads/media/image/43830578/desktop_12fe05b3-2db8-4381-ad80-0812fb21c534.png","https://cdn.goconqr.com/uploads/media/image/43830577/desktop_0b66131b-9446-4f29-9e63-a1f9f664117d.png","https://cdn.goconqr.com/uploads/media/image/43830671/desktop_fcdab854-ba39-4c74-a683-6bea048ef8df.png","https://cdn.goconqr.com/uploads/media/image/43830670/desktop_87ea2c88-1a9c-4a85-ac87-172de4b9e4b1.png","https://cdn.goconqr.com/uploads/media/image/43830730/desktop_b3722fe2-5cd4-4b86-91d0-29b9984f8139.png","https://cdn.goconqr.com/uploads/media/image/43830731/desktop_f6cdaea1-ed24-4f98-a74c-a018b9b9e8ba.PNG","https://cdn.goconqr.com/uploads/media/image/43855578/desktop_add460ea-6a4f-4423-bdc7-27473296188a.png","https://cdn.goconqr.com/uploads/media/image/43855577/desktop_39cb5b53-7b28-4d07-a051-9d4d4a681810.PNG"]

	Criado por gabriel ribeiro mais de 2 anos atrás

Simulado da certificação Azure AZ-104.

AZ - 104 Simulado IV

Questão 1 de 60

Selecione uma das seguintes:

Explicação

Questão 2 de 60

Question #02 Pagina25 - 40 You have an Azure Kubernetes Service (AKS) cluster named AKS1. You need to configure cluster autoscaler for AKS1. Which two tools should you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

Selecione uma ou mais das seguintes:

Explicação

Questão 3 de 60

Selecione uma das seguintes:

Explicação

Questão 4 de 60

Question #04 Pagina25 - 42 You have an Azure subscription that contains the resources shown in the following table. You need to configure a proximity placement group for VMSS1. Which proximity placement groups should you use?

Selecione uma das seguintes:

Explicação

Questão 5 de 60

Selecione uma das opções:

Explicação

Questão 6 de 60

Selecione uma das opções:

Explicação

Questão 7 de 60

Selecione uma das opções:

Explicação

Questão 8 de 60

Question #08 Pagina26 - 46 You have an Azure subscription named Subscription1. You deploy a Linux virtual machine named VM1 to Subscription1. You need to monitor the metrics and the logs of VM1. What should you use?

Selecione uma das seguintes:

Explicação

Questão 9 de 60

Selecione uma das seguintes:

Explicação

Questão 10 de 60

Question #10 Pagina26 - 48 You plan to deploy three Azure virtual machines named VM1, VM2, and VM3. The virtual machines will host a web app named App1. You need to ensure that at least two virtual machines are available if a single Azure datacenter becomes unavailable. What should you deploy?

Selecione uma das seguintes:

Explicação

Questão 11 de 60

Question #11 Pagina26 - 49 You have an Azure virtual machine named VM1 that runs Windows Server 2019. You save VM1 as a template named Template1 to the Azure Resource Manager library. You plan to deploy a virtual machine named VM2 from Template1. What can you configure during the deployment of VM2?

Selecione uma das seguintes:

Explicação

Questão 12 de 60

Selecione uma das seguintes:

Explicação

Questão 13 de 60

Selecione uma das seguintes:

Explicação

Questão 14 de 60

Selecione uma das seguintes:

Explicação

Questão 15 de 60

Selecione uma das seguintes:

Explicação

Questão 16 de 60

Selecione uma das seguintes:

Explicação

Questão 17 de 60

Selecione uma das seguintes:

Explicação

Questão 18 de 60

Selecione uma das seguintes:

Explicação

Questão 19 de 60

Selecione uma das seguintes:

Explicação

Questão 20 de 60

Selecione uma das seguintes:

Explicação

Questão 21 de 60

Selecione uma das seguintes:

Explicação

Questão 22 de 60

Question #22 You plan to back up an Azure virtual machine named VM1. You discover that the Backup Pre-Check status displays a status of Warning. What is a possible cause of the Warning status?

Selecione uma das seguintes:

Explicação

Questão 23 de 60

Selecione uma das opções:

Explicação

Questão 24 de 60

Selecione uma das seguintes:

Explicação

Question #02 Pagina25 - 40

You have an Azure Kubernetes Service (AKS) cluster named AKS1.
You need to configure cluster autoscaler for AKS1.
Which two tools should you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

Question #04 Pagina25 - 42

You have an Azure subscription that contains the resources shown in the following table.

You need to configure a proximity placement group for VMSS1.
Which proximity placement groups should you use?

Question #08 Pagina26 - 46

You have an Azure subscription named Subscription1.
You deploy a Linux virtual machine named VM1 to Subscription1.
You need to monitor the metrics and the logs of VM1.
What should you use?

Question #10 Pagina26 - 48

You plan to deploy three Azure virtual machines named VM1, VM2, and VM3. The virtual machines will host a web app named App1.
You need to ensure that at least two virtual machines are available if a single Azure datacenter becomes unavailable.
What should you deploy?

Question #22

You plan to back up an Azure virtual machine named VM1.
You discover that the Backup Pre-Check status displays a status of Warning.
What is a possible cause of the Warning status?

Question #28

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an Azure Resource Manager template.
You need to ensure that NGINX is available on all the virtual machines after they are deployed.
What should you use?

Question #35 Pagina30 - 06

Your on-premises network contains an SMB share named Share1.
You have an Azure subscription that contains the following resources:
✑ A web app named webapp1
✑ A virtual network named VNET1
You need to ensure that webapp1 can connect to Share1.
What should you deploy?