Check the load rating that is marked on the stepladder. The rating should cover the person’s weight and the weight of tools that will be used.
Use a stepladder that is about 1 m shorter than the highest point you have to reach.
Do not use a ladder that has cracks, lose or corroded rivets, defective braces, or parts (including the slip resistant feet) that are in poor condition. Make sure it is free of grease or oil or other slippery substances.
Open the stepladder spreaders and shelf fully and lock the braces.
Check stability. Ensure that all ladder feet are on a firm, level and non-slippery surface.
Place a stepladder at right angles to the work, with either the front or back of the steps facing the work.
Keep the stepladder close to the work.
Lock Spreader
Avoid pushing or pulling stepladders from the side. Repeated sideways movement can make ladders wobbly since they are weaker or less stable in those directions.
Face the stepladder when climbing up or down. Keep your body centered between side rails. You have climbed too high if your knees are above top of the stepladder or if you cannot maintain a handhold on the ladder.
Maintain a firm grip. Use both hands when climbing.

	Criado por Josh Wienekus aproximadamente 2 anos atrás

1 H&S Notas sobre Safety Precautions – working with ladder., criado por Josh Wienekus em 08-06-2022.

Safety Precautions – working with ladder.