2W151 Volume 1: Safety and Security - Quiz 6

1

Personal protective equipment greatly:

1

AFI 91-203, Air Force Consolidated Occupational Safety Instruction, Chapter 7, provides guidance for

1

What should you refer to when checklists do not cover local variations?

1

On an armament shop's floors, lines used to indicate permanent aisles should be what colors?

1

First-aid kits may be kept in a maintenance shop when:

1

Rubber gloves and face shields are necessary in a maintenance shop to:

1

What governs the size, style, and design of the shadow boards and toolboxes used to control hand tools?

1

What type of accident prevention sign has yellow lettering on a black background?

1

Which accident prevention sign has white lettering on a green background?

1

What information is contained on a material safety data sheet (MSDS)?

1

Which of the following is not a goal of the Hazardous Communication Standard?

1

Who is responsible for adding new information to the material safety data sheet (MSDS) on the hazards of chemical and the appropriate control measures within three months after becoming aware of such information?

1

According to Occupational Safety and Health Administration (OSHA) labeling requirements, how are pipes transporting hazardous chemicals labeled?

1

What agency should you contact if you suspect your lighting is inadequate in a work area?

1

Which type of hazard causes the majority of injuries on the job?

1

Dust, gas, vapor, fumes, and mist are examples of what type of contaminants?

1

What term defines a measure of the severity of symptoms a given chemical produces or how long these symptoms persist?

1

In which document can you find information on the hazards of chemicals?

1

Which type of atmospheric contaminants produce a narcotic or drug-like effect?

1

Particles of wood and metal are classified as what type of skin contaminant?

1

A face shield usually replaces goggles when

1

What type of arm and hand protection is needed when working around jagged objects, rough wood, or similar hazards?

1

the definition of fire is the rapid oxidation of a combustible material producing

1

A flammable liquid is any liquid with a flash point below

1

The temperature where a flammable liquid produces enough vapors to produce a flame is a source of ignition is supplied close to the surface is the

1

The flashpoint of a liquid can be most easily avoided by

1

Which fire classification can be effectively extinguished by water?

1

Where do class C fires occur?

1

The fire extinguisher for which class of fires are never assigned numerical ratings nor given multi-purpose ratings?

1

What hazards does carbon dioxide present to the user when used as a fire-fighting agent in concentrations sufficient to extinguish a fire?

1

What amount of current flow results in a disturbed heart rhythm that the victim cannot normally recover without medical intervention?

1

The intensity and effect of electrical shock are dependent on the circumstances and

1

One of the purposes of electrical safety is to prevent

1

What is the most common hazard associated with electricity?

1

Who should accomplish electrical repairs?

1

As a general rule, electrical items should

1

When performing measurements on energized circuits, meters should

1

When voltage is applied to equipment being repaired, workers should

1

When cleaning electrical equipment, you should use

1

When do you use compressed air for cleaning electrical equipment?

1

What do you do before testing and following repair actions of electrical equipment?

1

Why do you visually inspect equipment before testing and following repair actions?

1

Wearing jewelry is prohibited around electrical equipment because metal jewelry can

1

In electrical systems bonding is simply the placement of a

1

What are the preferred metal clamps used for grounding and bonding in electrical systems?

1

In electrical systems, bonding wires are attached to what type of metal surface?

1

What effect does bonding have on static electrical charges?

1

What electrical safety measure is required in maintenance operations involving flammable liquids, flammable gasses and explosives?

1

In an equipment ground, the most important point to remember about grounding paths is that they must

1

What is considered the secondary hazard involved with wiring around fiber optics?

1

General housekeeping can be defined as maintaining a work area in a general state of good order that will facilitate completion of work and is covered by AFI 91-203, chapter 5.

1

What type of signs have lettering in black on magenta background?

1

What type of signs generally have black letters on white background on the lower panel?

1

What is the purpose of the Federal Hazard Communication Training Program?

1

When should you wear rubber gloves?

1

Which of the following three things must be present to have a fire?

1

What class of fire extinguisher would you use to put out fires involving gasoline or other flammable liquids?

1

What is the primary consideration when dealing with electricity?

1

What are the two purposes behind electrical safety?

1

What is the first choice as an effective method for cleaning dust and debris from circuits?

1

What are the two types of grounds?

1

The purpose of an equipment ground is to drain off any voltage built up in units due to poor insulation or bare wires.