Aric Hansen
Quiz por , criado more than 1 year ago

Intermediate vSphere 6 Certification Quiz sobre vSphere 6 Foundations Quiz, criado por Aric Hansen em 20-01-2016.

10
0
0
Aric Hansen
Criado por Aric Hansen quase 9 anos atrás
Fechar

vSphere 6 Foundations Quiz

Questão 1 de 27

1

An administrator is performing an interactive installation of ESXi 6.x.
Which three options are available for installation? (Choose three.)

Selecione uma ou mais das seguintes:

  • DVD

  • USB

  • PXE

  • Scripted

  • Auto Deploy

Explicação

Questão 2 de 27

1

An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere
Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts.
Which Distributed Switch version should be created to support this configuration?

Selecione uma das seguintes:

  • Distributed Switch: 6.0.0

  • Distributed Switch: 5.0.0

  • Distributed Switch: 5.1.0

  • Distributed Switch: 5.5.0

Explicação

Questão 3 de 27

1

Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose
two.)

Selecione uma ou mais das seguintes:

  • Verify that there is at least one Distributed Port Group on the Distributed Switch.

  • Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.

  • Verify that the Distributed Switch has been configured with a Network Profile.

  • Verify that Network I/O control for Management Traffic is configured for the highest share value.

Explicação

Questão 4 de 27

1

Which three VLAN Tagging modes are available in vSphere 6.x? (Choose three.)

Selecione uma ou mais das seguintes:

  • External Switch Tagging

  • Private VLAN Tagging

  • Virtual Switch Tagging

  • VXLAN Tagging

  • Virtual Guest Tagging

Explicação

Questão 5 de 27

1

What is the effective vSphere licensing level during the 60 day evaluation period?

Selecione uma das seguintes:

  • vSphere Foundation Essentials Plus

  • vSphere Standard

  • vSphere Enterprise

  • vSphere Enterprise Plus

Explicação

Questão 6 de 27

1

What component must be installed prior to deploying a vCenter Server in vSphere 6.x?

Selecione uma das seguintes:

  • vCenter Identity Services

  • Platform Services Controller

  • vCenter Single Sign-On

  • Client Integration Plug-In

Explicação

Questão 7 de 27

1

An administrator deploys vCenter Server using the embedded Platform Services Controller. After testing the deployment for a couple of months, it is determined that the environment would be better served with an external Platform Services Controller.
What should the administrator do to meet this new requirement?

Selecione uma das seguintes:

  • Deploy a fresh instance of vCenter Server with an external Platform Services Controller.

  • Perform a fresh install of an external Platform Services Controller.

  • Migrate the embedded Platform Services Controller to an external Platform Services Controller.

  • Upgrade the embedded Platform Services Controller to an external Platform Services Controller.

Explicação

Questão 8 de 27

1

An administrator is installing vCenter Server for an environment that has 40 ESXi 6.x Hosts and 150 virtual machines.
Which database would meet the minimal requirements needed for this task?

Selecione uma das seguintes:

  • vFabric Postgress

  • Microsoft SQL Express 2008

  • Microsoft SQL Server 2014

  • Oracle 11g

Explicação

Questão 9 de 27

1

What information is required as part of an interactive ESXi 6.x installation?

Selecione uma das seguintes:

  • Keyboard layout

  • IP Address

  • Root password

  • DNS information

Explicação

Questão 10 de 27

1

After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change.
What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)

Selecione uma ou mais das seguintes:

  • Login to the Direct Console User Interface and change it from here.

  • Edit the Default TCP/IP Configuration from the vSphere Web Client

  • Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.

  • Update the information in DNS and the ESXi host will automatically update with these changes.

Explicação

Questão 11 de 27

1

You are editing the management network configuration of an ESXi 6.x Host from the vSphere Web Client. You mistakenly put the incorrect VLAN in place for the management network. What action do you need to take to correct this?

Selecione uma das seguintes:

  • You need to manually edit the configuration on the host with command line utilities.

  • No action is required. By default ESXi rolls back configuration changes that disconnect the host.

  • The ESXi host system configuration will need to be restored to the factory configuration to fix the issue

  • The change can be reverted in the vSphere Web Client by simply editing the switch again.

Explicação

Questão 12 de 27

1

You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host.
How can this action be accomplished?

Selecione uma das seguintes:

  • Configure the Advanced Settings > Annotations screen of the ESXi host.

  • This is configured from the Direct Console User Interface configuration menu.

  • It is not possible to configure a security banner for the ESXi host.

  • From vCenter Server, this setting is configured globally in the vCenter Server configuration.

Explicação

Questão 13 de 27

1

An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host.
How is the network initially configured?

Selecione uma das seguintes:

  • The network is configured by Automatic Private IP Addressing (APIPA).

  • The network is configured based on the settings detected in DNS.

  • The network is configured with the address as specified in the installer.

  • The network is automatically configured by DHCP.

Explicação

Questão 14 de 27

1

An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured.
Where is the ESXi host IP address configured?

Selecione uma das seguintes:

  • RVC console

  • Direct Console User Interface

  • vSphere Web Client

  • vSphere Client

Explicação

Questão 15 de 27

1

An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface.
How can the configuration be validated as correct without any additional tools?

Selecione uma das seguintes:

  • Add the host to vCenter Server and if it works, then all networking settings are ok.

  • Select the Test Management Network option from the DCUI.

  • Connect to the host with the vSphere Client and click the Test Network option.

  • Use PowerCLI to connect to the host and initiate a network test.

Explicação

Questão 16 de 27

1

An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.
How can this be accomplished in the shortest amount of time?

Selecione uma das seguintes:

  • Run the ESXi installer again and reinstall the host.

  • Select the Reset System Configuration option from the vSphere Client when connected directly to the host.

  • From the Direct Console User Interface, select Reset System Configuration.

  • Use a host profile to reset the configuration to a default state.

Explicação

Questão 17 de 27

1

Your manager has given you a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host.
Which two actions can be used to run this script on an ESXi host? (Choose two.)

Selecione uma ou mais das seguintes:

  • Connect to the host with Ruby vSphere Console and run the script from there.

  • Enable SSH access from the Direct Console User Interface.

  • Enable the ESXi Shell from the Direct Console User Interface.

  • Run the script directly from the vSphere Web Client.

Explicação

Questão 18 de 27

1

What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch?

Selecione uma das seguintes:

  • Route based on originating virtual port ID

  • Route based on IP Hash

  • Route based on source mac address

  • Route based on physical NIC load

Explicação

Questão 19 de 27

1

How are ports scaled on vSphere Standard Switches (vSS)?

Selecione uma das seguintes:

  • Ports on a vSS can be dynamically scaled up and down.

  • Ports on a vSS can only be statically scaled up or down.

  • Ports on a vSS can only be dynamically scaled down.

  • Ports on a vSS can only be dynamically scaled up.

Explicação

Questão 20 de 27

1

Which three connection types are available when configuring a vSwitch in the vSphere Web Client? (Choose three.)

Selecione uma ou mais das seguintes:

  • VMkernel Network Adapter

  • Physical Network Adapter

  • Virtual Machine Port Group for a Standard Switch

  • vMotion Network Adapter

  • vSAN Network Adapter

Explicação

Questão 21 de 27

1

How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch?

Selecione uma das seguintes:

  • 64

  • 96

  • 128

  • 256

Explicação

Questão 22 de 27

1

An administrator is configuring the Failover Order option on a vSphere Distributed Switch.
Which two options should be used with IP-hash load balancing? (Choose two.)

Selecione uma ou mais das seguintes:

  • Active Uplinks

  • Standby Uplinks

  • Unused Uplinks

  • Override Failover Order

Explicação

Questão 23 de 27

1

An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts.
Which Distributed Switch version should be created to support this configuration?

Selecione uma das seguintes:

  • Distributed Switch: 6.0.0

  • Distributed Switch: 5.0.0

  • Distributed Switch: 5.1.0

  • Distributed Switch: 5.5.0

Explicação

Questão 24 de 27

1

During a new vSphere Distributed Switch configuration, where does the Maximum Transmission Unit (MTU) value get modified?

Selecione uma das seguintes:

  • Uplink Settings

  • Switch Settings

  • Portgroup Settings

  • NIC Teaming Settings

Explicação

Questão 25 de 27

1

Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?

Selecione uma ou mais das seguintes:

  • Route based on physical NIC workload

  • Route based on IP Hash

  • Route based on the originating virtual port

  • Route based on Source MAC Hash

Explicação

Questão 26 de 27

1

Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)

Selecione uma ou mais das seguintes:

  • Provisioning Traffic

  • Virtual Volumes Traffic

  • vSphere Replication NFC Traffic

  • Virtual SAN Traffic

  • FCoE Traffic

Explicação

Questão 27 de 27

1

Which two networking connection types can be configured on a virtual switch? (Choose two.)

Selecione uma ou mais das seguintes:

  • Virtual machine portgroups

  • VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network

  • Web services over the Management Network

  • NFS and FCoE storage services

Explicação

Anterior
Próximo