Este Quiz é cronometrado.
Você tem 15 minutos para completar as 24 questões deste quiz..
What can be done to modify the car remotely using telemetry?
You can stop the car.
You can make adjustments to the engine control unit (ECU).
You can't do anything, just acquired data.
Wich statements are true?
In case of rain is forbidden to use telemetry because of the high voltages are needed.
The telemetry system is not necessary to shut down with the other electronic systems, it can always be turned on.
Telemetry is optional.
All are false
How many Master Switches must be in the vehicle?
1
2
3
The brake light itself has to have a black background and a rectangular shape.
Which is the international electrical symbol?
Red spark on a white-edged blue triangle.
Red spark on a yellow-edged blue triangle.
Blue spark on a white-edged red square.
The primary master switch must:
Be located on the (driver’s) left side of the vehicle, in proximity to the Front Hoop, at leg height and be easily actuated from outside the car.
Be located on the (driver’s) right side of the vehicle, in proximity to the Main Hoop, at shoulder height and be easily actuated from outside the car.
Be located on the (driver’s) right side of the vehicle, in proximity to the Front Hoop, at shoulder height and be easily actuated from outside the car.
The cockpit-mounted master switch must be located to provide easy actuation by the driver in an emergency or panic situation.
Which statement is true?
The cockpit-mounted master switch must be of a rotary type and must be direct acting,
The cockpit-mounted master switch must be a push/pull Emergency switch.
The cockpit-mounted master switch shouldn't act through a relay.
How many hydraulics systems must have our car?
1 circuit.
2 circuit.
4 circuit.
It’s indifferent.
Which is the maximum cc permitted?
600 cc
610 cc
500 cc
1000 cc
Which kind of coolant fluid can we use?
Oil.
Water + glycol additives.
Water.
Which is the maximum diameter permitted for the restrictor?
19 mm
20 mm
21 mm
23 mm
For the Design-Event the vehicle has to fulfills the following conditions:
It has to be ready-to-run.
It only has to be fully assembled.
It has to be in finished condition.
All are true.
What signifies a BLUE FLAG during the FSAE Endurance Event?
Your session has been completed. Exit the course at first opportunity.
Pull into the designated passing zone to be passed by a faster competition. Obey the corner workers hand signals at the end of the passing zone to merge into competition.
Pull into the penalty box for discussion with the Chief Marshall/Director of Operations or other official concerning an incident. A time penalty may be assessed for such incident.
Danger, SLOW DOWN, be prepared to take evasive action, something has happened beyond the flag station. NO PASSING unless directed by the corner workers.
Which is the minimum radius for the forward facing edges on the bodywork?
45
15
35
38
No part of any aerodynamic device can be: (Chose the false one)
Further rearward than 350mm of the rearward of the rear of the rear tires.
Any part of the aerodynamic devices can be higher than 1,2m. from the ground.
Power ground effects are prohibited.
Aerodynamic devices can be configurable during the FSAE competition.
Which is the basic form of the chassis?
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure and Templates.
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure, Front bulkhead, Front bulkhead support system and Templates.
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure, Front bulkhead, Front bulkhead support system.
How many templates are required and how are they held?
2; horizontal and vertical.
3; 2 horizontal and vertical.
1; horizontal.
1; vertical.
Where do you must locate bateries, master cylinders, hydraulics reservoirs (non-crushable objects)?
Front bulkhead.
Front bulkhead and bulkhead.
Bulkhead.
Which dimension must have impact atenuator?
200 wide 100 high 200 long.
100 wide 100 high 200 long.
100 wide 200 high 200 long.
200 wide 100 high 100 long.
The distance between the front axle and the rear axle:
Is called track and it must be at least 75% shorter than wheelbase.
Is called wheelbase and it must have at least 1525 mm.
Is called wheelbase and it must be a maximum of 1675 mm long.
B and C are both correct.
How vehicle rollover stability is evalued during the scrutineering?
Measuring the width and height of the vehicle.
The vehicle has to take a 180º turn and 5 metres of radius to 50 km/h.
Using a tilt table.
A and C are both correct.
Which statement about suspension system is true? (only one)
Suspension system is optional but recommended.
The usable wheel travel must be of at least 45,4 mm.
The bottom part of the chassis must be at least at 10 mm above the ground in a bump.
The usable wheel travel must be of at least 50,8 mm.
After the vehicle is approved to compete in the dynamic events:
You can change the engine if it fails.
You can not replace the tires.
You can adjust the tire pressure.
You can replace damaged suspension wishbones.
