CCNA (200-120) / 60questions 60minuts / EN

Questão 1 de 60

1

How should you power up a Cisco router?

Selecione uma das seguintes:

Press the Reset button.
Turn the power switch to “on.”
Connect the fiber cable to another router.
Attach the power cable plug to the router power supply socket.

Explicação

Questão 2 de 60

1

How do you instruct a Cisco device to parse and execute an entered command?

Selecione uma das seguintes:

Press the Send key
Press the Enter key
Add a space at end of the command
Wait 5 seconds after you enter the command

Explicação

Questão 3 de 60

1

Which Cisco router component is used primarily to store the startup-config file?

Selecione uma das seguintes:

RAM
ROM
NVRAM
Flash memory
Configuration register

Explicação

Questão 4 de 60

1

If a route for a network is in holddown and an update arrives from a neighboring router with the same metric as was originally recorded for the network, what does the router do?

Selecione uma das seguintes:

Ignores the update
Increments the holddown timer
Marks the network as “accessible” and removes the holddown timer
Marks the network as “accessible” but keeps the holddown timer on

Explicação

Questão 5 de 60

1

How could you obtain CDP information about a remote device that is not directly connected?

Selecione uma das seguintes:

Use the command show cdp neighbors’ address.
Use the command show cdp neighbors’ hostname.
Use SSH or Telnet to access a Cisco device connected to the target device.
It is not possible to obtain CDP information about a remote device.

Explicação

Questão 6 de 60

1

Which address type from IPv4 was eliminated in IPv6?

Selecione uma das seguintes:

Unicast
Multicast
Broadcast
Everycast

Explicação

Questão 7 de 60

1

Set of networks subject to translation using NAT.

Selecione uma das seguintes:

Static NAT
Dynamic NAT
Inside network
Outside global IP address

Explicação

Questão 8 de 60

1

If a router does not match the appropriate address portions to a number on its routing table, it ❌

Arraste e solte para completar o texto.

sends the packet back to the sender.

passes the packet to the next router in.

adds that number to its table.

discards the packet.

Explicação

Questão 9 de 60

1

How many subnets are gained by subnetting 172.17.32.0/20 into multiple /28 subnets?

Selecione uma das seguintes:

16
32
256
1024

Explicação

Questão 10 de 60

1

Which of the following describes the DHCP server provided by Cisco IOS?

Selecione uma das seguintes:

It is a full DHCP server
Its support is limited to assigning IP addresses to clients.
It has to get is DHCP information for a master DHCP server.
It has limited DHCP support and can only assign IP addresses and default gateways to clients.

Explicação

Questão 11 de 60

1

How can you most effectively summarize the IP range of addresses from 172.168.12.0/24 through 172.168.13.0/24?

Selecione uma das seguintes:

172.168.12.0/23
172.168.12.0/22
172.168.12.0/21
172.168.12.0/20

Explicação

Questão 12 de 60

1

A subnet mask tells the router to look at which portions of an IP address?

Selecione uma das seguintes:

Mask and host bits
Host and network bits
Host and subnet bits
Network and subnet bits

Explicação

Questão 13 de 60

1

If a route for a network is in holddown and an update arrives from a neighboring router with the same metric as was originally recorded for the network, what does the router do?

Selecione uma das seguintes:

Ignores the update
Increments the holddown timer
Marks the network as “accessible” and removes the holddown timer
Marks the network as “accessible” but keeps the holddown timer on

Explicação

Questão 14 de 60

1

What is the decimal equivalent of the binary number 11000111?

Selecione uma das seguintes:

218
199
179
208

Explicação

Questão 15 de 60

1

What does split horizon specify?

Selecione uma das seguintes:

That information about a route should not be sent in any direction
That information about a route should not be sent back in the direction that the original information came from
That information about a route should always be sent back in the direction that the original information came from
That information about a route should be sent back only in the direction that the original information came from

Explicação

Questão 16 de 60

1

The binary number 11101000111 converted into a decimal number, using powers of 2, is ❌

Arraste e solte para completar o texto.

1183.

1873.

1638.

1863.

Explicação

Questão 17 de 60

1

In which situation is an administrative distance required?

Selecione uma das seguintes:

whenever static routes are defined
whenever dynamic routing is enabled
when the same route is learned via multiple routing sources
when multiple paths are available to the same destination and they are all learned via the same routing protocol

Explicação

Questão 18 de 60

1

What is the RSTP equivalent to the STP listening state?

Selecione uma das seguintes:

Blocking
Listening
Discarding
Forwarding

Explicação

Questão 19 de 60

1

Which statement is true of a port in the listening state?

Selecione uma das seguintes:

The port is able to check for BPDUs and populate the MAC table.
The port is able to check for BPDUs, but not yet populate its MAC table.
The port is able to populate its MAC table, but not yet forward user frames.
The port is able to forward user frames, but not yet populate its MAC table.

Explicação

Questão 20 de 60

1

Which of the following is a customized text that is displayed before the username and password login prompts?

Selecione uma das seguintes:

Message Of the Day
Login banner
User banner
Warning message

Explicação

Questão 21 de 60

1

With RSTP, which two port roles are included in the active topology?

Selecione uma das seguintes:

Root and alternate
Root and designated
Alternate and backup
Designated and backup

Explicação

Questão 22 de 60

1

Which term commonly describes the endless flooding or looping of frames?

Selecione uma das seguintes:

Flood storm
Loop overload
Broadcast storm
Broadcast overload

Explicação

Questão 23 de 60

1

Regarding STP, what is the state of a nondesignated port?

Selecione uma das seguintes:

Blocking
Learning
Listening
Forwarding

Explicação

Questão 24 de 60

1

Which of the following is the most secure method of remotely accessing a network device?

Selecione uma das seguintes:

http
telnet
ssh
rmon
snmp

Explicação

Questão 25 de 60

1

When you use the show interface command to display the status and statistics for the interfaces configured on a Catalyst switch, which output field indicates the MAC address that identifies the interface hardware?

Selecione uma das seguintes:

MTU 1500 bytes
Hardware is … 10BaseT
Address is 0050.BD73.E2C1
802.1d STP State: Forwarding

Explicação

Questão 26 de 60

1

Which term describes multiple copies of a frame arriving on different ports of a switch?

Selecione uma das seguintes:

Flood storm
Multiple frame transmission
MAC database instability
Loop overload

Explicação

Questão 27 de 60

1

Which show command requires that you have privileged EXEC mode access?

Selecione uma das seguintes:

show ip
show version
show running
show interfaces

Explicação

Questão 28 de 60

1

What are TWO major benefits of adding a bridge to a network?

Selecione uma ou mais das seguintes:

Isolating potential network problems to specific segments
Increasing the speed of a network
Extending a LAN to cover greater distances by joining multiple segments
Creating fewer collision domains
Forwarding data frames between LAN segments

Explicação

Questão 29 de 60

1

When a single computer with one IP address has several websites open at once, this is called ❌

Arraste e solte para completar o texto.

windowing.

session multiplexing.

segmenting.

connection-oriented protocol.

Explicação

Questão 30 de 60

1

If the POST tests complete successfully on a Catalyst switch, what display could you see on the console?

Selecione uma das seguintes:

The > prompt
The privileged EXEC prompt
The Management Console logon screen
A list of commands available on the switch

Explicação

Questão 31 de 60

1

Which information does the show vlan command display?

Selecione uma das seguintes:

VTP domain parameters
VMPS server configuration parameters
Which ports are configured as trunks
Names of the VLANs and the ports assigned to the VLANs

Explicação

Questão 32 de 60

1

What are TWO reasons for using 802.1Q?

Selecione uma ou mais das seguintes:

To allow switches to share a trunk link with non-trunking clients
To allow clients to see the 802.1Q header
To provide inter-VLAN communications over a bridge
To load-balance traffic between parallel links using the Spanning Tree Protocol
To provide trunking between Cisco switches and other vendor switches

Explicação

Questão 33 de 60

1

Which CLI prompt indicates that you are working in privileged EXEC mode?

Selecione uma das seguintes:

hostname#
hostname>
hostname-exec>
hostname-config

Explicação

Questão 34 de 60

1

What are the TWO most common IPv4-to-IPv6 transition techniques?

Selecione uma ou mais das seguintes:

IPv6 NAT
dual stack
6to4 tunnels
IPv6 mobile

Explicação

Questão 35 de 60

1

Which TWO pieces of information are included in a CDP update packet?

Selecione uma ou mais das seguintes:

platform
routing updates
device identifiers
MAC Address list
link speed

Explicação

Questão 36 de 60

1

Which TWO statements are true regarding dual stack?

Selecione uma ou mais das seguintes:

A new API replaces gethostbyname and gethostbyaddr calls.
Tunneling is automatic.
Dual stack prefers IPv4 over IPv6.
You cannot use IPv4 while converting to IPv6.
The stack to use is chosen based on destination address.

Explicação

Questão 37 de 60

1

How can you most effectively summarize the IP range of addresses from 10.1.32.0 through 10.1.35.255?

Selecione uma das seguintes:

10.1.32.0/23
10.1.32.0/22
10.1.32.0/21
10.1.32.0/20

Explicação

Questão 38 de 60

1

How do you start a Catalyst 2950 series switch?

Selecione uma das seguintes:

Press the on/off switch.
Power up the redundant power supply.
Connect a network cable to another switch on the network.
Attach the power cable plug to the switch power supply socket.

Explicação

Questão 39 de 60

1

Which Cisco IOS command should you use to set the clock speed to 64 kbps on a serial interface on a Cisco router?

Selecione uma das seguintes:

clock rate 64
clock speed 64
clock rate 64000
clock speed 64000

Explicação

Questão 40 de 60

1

OSPF routes packets within a single ❌

Arraste e solte para completar o texto.

area.

network.

segment.

autonomous system.

Explicação

Questão 41 de 60

1

Which Cisco IOS command creates a message to be displayed upon router login?

Selecione uma das seguintes:

hostname hostname
banner motd message
hostname interface description
description interface description

Explicação

Questão 42 de 60

1

Which Cisco IOS command is used to return to user EXEC mode from the privileged EXEC mode?

Selecione uma das seguintes:

exit>
quit
disable
userexec

Explicação

Questão 43 de 60

1

Which access level allows a person to access all router commands and can be password protected to allow only authorized individuals to access the router?

Selecione uma das seguintes:

user EXEC level
setup EXEC level
enable EXEC level
privileged EXEC level

Explicação

Questão 44 de 60

1

Which component of security ensures the data has not been tampered with?

Selecione uma das seguintes:

Authentication
Integrity
Confidentiality
Anti-Playback

Explicação

Questão 45 de 60

1

Which organization offers certification for interoperability between vendors of 802.11 products?

Selecione uma das seguintes:

Wi-Fi
IEEE
EMA
WISC

Explicação

Questão 46 de 60

1

Which THREE are the steps to secure a WLAN?

Selecione uma ou mais das seguintes:

Encryption for providing privacy and confidentiality
Authentication to ensure that legitimate clients and users access the network via trusted access points
Controls transmit power to limit the AP access range to the property boundaries of the parent organization
Protection from security risks and availability with intrusion detection and intrusion protection systems for WLANs

Explicação

Questão 47 de 60

1

What are THREE characteristics of Ethernet 802.3?

Selecione uma ou mais das seguintes:

based on the CSMA/CD process
a standard that has been replaced by Ethernet II
specifies the physical layer (Layer 1)
developed in the mid-1970s
specifies the MAC portion of the data link layer (Layer 2)
also referred to as thick Ethernet

Explicação

Questão 48 de 60

1

Which TWO of these addresses are private IP addresses?

Selecione uma ou mais das seguintes:

10.215.34.124
127.16.71.43
172.17.10.10
225.200.15

Explicação

Questão 49 de 60

1

How many bits are in an IPv4 address?

Selecione uma das seguintes:

16
32
48
64
128

Explicação

Questão 50 de 60

1

Encapsulates the network layer packet in a frame.

Selecione uma das seguintes:

Network layer
Datalink layer
Physical layer

Explicação

Questão 51 de 60

1

Occurs when RF waves are soaked up by walls.

Selecione uma das seguintes:

Absorption
Reflection
Scattering

Explicação

Questão 52 de 60

1

How many bits are in an IPv6 address?

Selecione uma das seguintes:

16
32
48
64
128

Explicação

Questão 53 de 60

1

Provides applications for file transfer, network troubleshooting, and Internet activities, and supports the network

Selecione uma das seguintes:

Physical layer
Datalink layer
Internet layer
Transport layer
Application layer

Explicação

Questão 54 de 60

1

Encodes the data-link frame into a pattern of 1s and 0s (bits) for transmission on the medium (usually a wire).

Selecione uma das seguintes:

Network layer
Datalink layer
Physical layer

Explicação

Questão 55 de 60

1

Which of the following four attacks are classified as access attacks? (choose one or more)

Selecione uma ou mais das seguintes:

Password attacks
DDoS
Trojan horse
Love Bug

Explicação

Questão 56 de 60

1

Which THREE statements about TCP are accurate?

Selecione uma ou mais das seguintes:

TCP operates at Layer 3 of the TCP/IP stack.
TCP is a connection-oriented protocol.
TCP provides no error checking.
TCP packets are numbered and sequenced so that the destination can reorder packets and determine if a packet is missing.
TCP provides no recovery service.
Upon receipt of one or more TCP packets, the receiver returns an acknowledgement to the sender indicating that it received the packets.

Explicação

Questão 57 de 60

1

What are TWO major benefits of adding a bridge to a network?

Selecione uma ou mais das seguintes:

isolating potential network problems to specific segments
increasing the speed of a network
extending a LAN to cover greater distances by joining multiple segments
creating fewer collision domains.
forwarding data frames between LAN segments.

Explicação

Questão 58 de 60

1

Indicates how well the network can accommodate more users or data transmission requirements.

Selecione uma das seguintes:

Speed
Cost
Security
Availability
Scalability
Reliability
Topology

Explicação

Questão 59 de 60

1

Which two statements about wireless networks are accurate?

Selecione uma ou mais das seguintes:

Instead of cables, wireless communication uses RFs or infrared waves to transmit data.
To receive the signals from the access point, a computer needs to have a wireless adapter card or wireless NIC.
For wireless LANs, a key component is a router, which propagates signal distribution.
Wireless networks are not very common, and generally only large corporations use them.

	Criado por Almery M. mais de 8 anos atrás

CCNA 200-120 CCNA 5.0 (CCNA 5.0 EN) Quiz sobre CCNA (200-120) / 60questions 60minuts / EN, criado por Almery M. em 16-03-2016.

CCNA (200-120) / 60questions 60minuts / EN

Questão 1 de 60

How should you power up a Cisco router?

Selecione uma das seguintes:

Explicação

Questão 2 de 60

How do you instruct a Cisco device to parse and execute an entered command?

Selecione uma das seguintes:

Explicação

Questão 3 de 60

Which Cisco router component is used primarily to store the startup-config file?

Selecione uma das seguintes:

Explicação

Questão 4 de 60

If a route for a network is in holddown and an update arrives from a neighboring router with the same metric as was originally recorded for the network, what does the router do?

Selecione uma das seguintes:

Explicação

Questão 5 de 60

How could you obtain CDP information about a remote device that is not directly connected?

Selecione uma das seguintes:

Explicação

Questão 6 de 60

Which address type from IPv4 was eliminated in IPv6?

Selecione uma das seguintes:

Explicação

Questão 7 de 60

Set of networks subject to translation using NAT.

Selecione uma das seguintes:

Explicação

Questão 8 de 60

If a router does not match the appropriate address portions to a number on its routing table, it ❌

Arraste e solte para completar o texto.

Explicação

Questão 9 de 60

How many subnets are gained by subnetting 172.17.32.0/20 into multiple /28 subnets?

Selecione uma das seguintes:

Explicação

Questão 10 de 60

Which of the following describes the DHCP server provided by Cisco IOS?

Selecione uma das seguintes:

Explicação

Questão 11 de 60

How can you most effectively summarize the IP range of addresses from 172.168.12.0/24 through 172.168.13.0/24?

Selecione uma das seguintes:

Explicação

Questão 12 de 60

A subnet mask tells the router to look at which portions of an IP address?

Selecione uma das seguintes:

Explicação

Questão 13 de 60

If a route for a network is in holddown and an update arrives from a neighboring router with the same metric as was originally recorded for the network, what does the router do?

Selecione uma das seguintes:

Explicação

Questão 14 de 60

What is the decimal equivalent of the binary number 11000111?

Selecione uma das seguintes:

Explicação

Questão 15 de 60

What does split horizon specify?

Selecione uma das seguintes:

Explicação

Questão 16 de 60

The binary number 11101000111 converted into a decimal number, using powers of 2, is ❌

Arraste e solte para completar o texto.

Explicação

Questão 17 de 60

In which situation is an administrative distance required?

Selecione uma das seguintes:

Explicação

Questão 18 de 60

What is the RSTP equivalent to the STP listening state?

Selecione uma das seguintes:

Explicação

Questão 19 de 60

Which statement is true of a port in the listening state?

Selecione uma das seguintes:

Explicação

Questão 20 de 60

Which of the following is a customized text that is displayed before the username and password login prompts?