Questão 1
Questão
1. Under the Health & Safety at Work Act, an employer must produce a written
health and safety policy statement when employing:
Responda
-
a. Five operatives
-
b. Four operatives
-
c. Two operatives
-
d. One operative.
Questão 2
Questão
Which of the following electrical power tools is the safest to use on a construction
site?
Responda
-
1. 415V tool
-
2. 240V tool
-
3. 110V tool
-
4. Cordless tool.
Questão 3
Questão
What is the required distance from the bottom of a wall to the base of a ladder if
the vertical height from the base of the wall to the top of the ladder is six metres?
Responda
-
1. 500mm
-
2. 1,000mm
-
3. 1,500mm
-
4. 2,000mm.
Questão 4
Questão
What is the approximate height (H) that a ladder should project above a working
platform for access purposes?
Responda
-
1. 100mm
-
2. 200mm
-
3. 600mm
-
4. 1,000mm.
Questão 5
Questão
Which of the following requirements for construction sites is detailed under
the Construction (Health, Safety and Welfare) Regulations?
Responda
-
1. First aid provision
-
2. Toilet facilities
-
3. Safety sign provision
-
4. Accident reporting.
Questão 6
Questão
The preferred method of dealing with fumes from long-term lead welding
activities that are carried out indoors is:
Responda
-
1. Regular rest breaks
-
2. Local fume extraction
-
3. Half face dust mask
-
4. Full welding mask.
Questão 7
Questão
Which of the following types of PPE is essential when clearing a blockage in an
inspection chamber with drain rods?
Responda
-
1. Ear defenders
-
2. Knee pads
-
3. Rubber gloves
-
4. Dust mask.
Questão 8
Questão
In which of the following types of ground is the close boarded trench support
system most likely to be required?
Responda
-
1. Deep excavations with loose soil
-
2. Trench cut in concrete
-
3. Shallow excavations in clay
-
4. Shallow excavations in compacted gravel.
Questão 9
Questão
What type of sign has a green background and a white symbol?
Responda
-
1. Prohibition sign
-
2. Mandatory sign
-
3. Warning sign
-
4. Information sign.
Questão 10
Questão
A permit to work system is most likely to be needed when carrying out which of
the following activities?
Responda
-
1. Commissioning a hot water system
-
2. Soldering near combustible material
-
3. Fixing a plastic soil pipe
-
4. Bending LCS with a hydraulic bender.
Questão 11
Questão
Who has responsibility for ensuring that correct PPE is provided for work
activities?
Responda
-
1. The employee
-
2. The employer
-
3. The HSE
-
4. The site labourer.
Questão 12
Questão
A portable appliance (PAT) test is used to:
Responda
-
1. Check the gas pressure on a blowtorch
-
2. Check the operation of a cartridge operated tool
-
3. Check the electrical safety of a portable tool
-
4. Check the operation of a portable generator.
Questão 13
Questão
When planning to lift a cast iron, rainwater downpipe into position, which is far
too heavy to lift safely alone, what action should be taken?
Responda
-
1. Try your best on your own
-
2. Break the pipe into smaller parts first
-
3. Ask a work colleague to help with the lift
-
4. Install a smaller diameter pipe and inform your supervisor.
Questão 14
Questão
When using a propane blowtorch for soldering copper pipe components together,
you should:
Responda
-
1. Always have a fire extinguisher available
-
2. Never use it, if only working with dissimilar metals
-
3. Always wear a dust mask
-
4. Never solder when working alone.
Questão 15
Questão
If you accidently get a minor burn on your finger, your first action should be:
Responda
-
1. Rub antiseptic cream on the affected area
-
2. Cool the affected area using cold water
-
3. Immediately burst the blister that forms
-
4. Do nothing yourself, call the first aid officer and ambulance.
Questão 16
Questão
Under COSHH, propane gas is regarded as:
Responda
-
1. An irritant
-
2. Harmful
-
3. Extremely flammable
-
4. Toxic.