Chapter 2: Saftey Test

Descrição

Technical Welding WT-38 (Chapter 2: Saftey) Quiz sobre Chapter 2: Saftey Test, criado por Andrew Hewko em 19-02-2015.
Andrew Hewko
Quiz por Andrew Hewko, atualizado more than 1 year ago
Andrew Hewko
Criado por Andrew Hewko quase 10 anos atrás
180
0

Resumo de Recurso

Questão 1

Questão
Burns can be caused by ultraviolet light rays.
Responda
  • True
  • False

Questão 2

Questão
To treat a third degree burn, apply ointments or antibiotic cream.
Responda
  • True
  • False

Questão 3

Questão
Any cold liquid you can drink can be poured on a first or second degree burn.
Responda
  • True
  • False

Questão 4

Questão
Too much visible light can cause temporary night blindness.
Responda
  • True
  • False

Questão 5

Questão
Both earmuffs and earplugs protect the outer ear from burns.
Responda
  • True
  • False

Questão 6

Questão
Damage to your hearing caused by high sound levels is permanent and may not be detected until later in life.
Responda
  • True
  • False

Questão 7

Questão
Welding and cutting lead bearing alloys or metals whose surface have been painted with lead based paint can generate lead oxide fumes.
Responda
  • True
  • False

Questão 8

Questão
The welding area should be ventilated and forced ventilation is best, but natural ventilation is sometimes required.
Responda
  • True
  • False

Questão 9

Questão
Scrap metal and electrode stubs are difficult and costly to recycle.
Responda
  • True
  • False

Questão 10

Questão
When using extension cords on portable power tools, the size of the conductors must be small enough to enable a drop in voltage.
Responda
  • True
  • False

Questão 11

Questão
To treat a third degree burn ________.
Responda
  • apply ointments or antiseptic spray
  • remove all clothing stuck to the burn
  • cover the burn with thick sterile, non fluffy dressing
  • pour iced water on the burn

Questão 12

Questão
________ light is dangerous because the welder cannot feel the light while being exposed to it, and it may pass though clothing.
Responda
  • Ultraviolet
  • Infrared
  • Visible
  • Spectral

Questão 13

Questão
_______ Light can cause temporary night blindness.
Responda
  • Ultraviolet
  • Infrared
  • Visible
  • Spectral

Questão 14

Questão
The symptoms of lead poisoning include ________.
Responda
  • influenza
  • lung irritation and kidney damage
  • abdominal cramps and lung irritation
  • metallic taste, loss of appetite, nausea, abdominal cramps, and insomnia

Questão 15

Questão
The symptom of acute exposure to zinc oxide fumes include ________.
Responda
  • loss of appetite
  • lung irritation
  • abdominal cramps
  • insomnia

Questão 16

Questão
The symptoms of exposure to zinc oxide fumes include _______.
Responda
  • influenza symptoms
  • lung irritation and kidney damage
  • abdominal cramps ad lung irritation
  • metallic taste, loss of appetite, nausea, abdominal cramps, and insomnia

Questão 17

Questão
_________ is a gas that is produced by the ultraviolet radiation in the air in the vicinity of welding operations.
Responda
  • Argon
  • Phosgene
  • Ozone
  • Carbon dioxide

Questão 18

Questão
Acetylene cylinders that have been lying on their sides must stand upright for at least _____ hours before they are used.
Responda
  • two
  • three
  • four
  • five

Questão 19

Questão
_____ fire extinguishers are used for combustible solids.
Responda
  • Type A
  • Type B
  • Type C
  • Type D

Questão 20

Questão
______ fire extinguishers are used for combustible metals such as zinc and magnesium.
Responda
  • Type A
  • Type B
  • Type C
  • Type D

Questão 21

Questão
If a nut or bolt is too tight to loosen with a wrench, _______.
Responda
  • use a cheater bar
  • use a longer wrench
  • use a smaller wrench
  • cut the nut or bolt off

Questão 22

Questão
Welding cable must be spliced ______ the electrode holder.
Responda
  • within 10 feet of
  • more than 10 feet away from
  • within 20 feet of
  • more than 20 feet away from

Questão 23

Questão
To test a grinding stone for cracks ______.
Responda
  • tap the stone in four places and listen for a ring
  • visually inspect the stone
  • shine a light under the stone
  • wet the stone and look for bubbles

Questão 24

Questão
______ are usually either hydraulic or flywheel operated.
Responda
  • Cut-off machines
  • Shears
  • Power punches
  • Band saws

Questão 25

Questão
The base of a ladder should be set out a distance equal to ______ the height to the point of support.
Responda
  • one-fourth of
  • half of
  • one and a half times
  • twice

Semelhante

Chapter 7: Flame Cutting
Andrew Hewko
Test 1
Andrew Hewko
Chapter 8: Plasma Arc Cutting
Andrew Hewko
INQUÉRITO POLICIAL
julianodanielp
Alemão Básico
MarisaS
Comunidades de Aprendizagem: Geomorfologia
Catarina Troiano
Informática conhecimentos básicos
thiago.tc3
Mapa Mental - Como Criar um Mapa Mental
Adelaide Silva A
ATUALIDADES
Graciela Dias
Prep Like a Pro with GoConqr's GCSE Revision Timetable
Landon Valencia
Contextualização da Aula 2 - Gestão - Administração da Carreira Profissional
Fabrícia Assunção