Copiar e Editar

EXAMEN ANUAL

Descrição

Quiz sobre EXAMEN ANUAL, criado por Juan Javier Sastoque em 19-03-2015.
Juan Javier Sastoque
Quiz por Juan Javier Sastoque, atualizado more than 1 year ago
Juan Javier Sastoque
Criado por Juan Javier Sastoque mais de 9 anos atrás
68
1
0

Resumo de Recurso

Questão 1

Questão
Which of the following Aruba controllers is able to provide IEEE 802.3af? (Choose two)
Responda
  • 3200
  • 620
  • 650
  • 6000 with M3
  • 7000

Questão 2

Questão
What is the maximum number of remote APs supported by a 3600 controller?
Responda
  • 512
  • 1024
  • 128
  • 256
  • 2048

Questão 3

Questão
Which dual radio access point models support concurrent operations in the 2.4Ghz band as well as the 5Ghz band? (Choose three)
Responda
  • AP-92
  • AP-93
  • AP-105
  • AP-224
  • AP-135

Questão 4

Questão
Which of the following APs do NOT support dual radio operations? (Choose two)
Responda
  • AP 93
  • AP 105
  • RAP 3WN
  • AP 224
  • AP 135

Questão 5

Questão
Centralized licensing is not in use on an Aruba based network which has a Master and three local controllers. No APs terminate on the Master controller. Roles and Firewall policies need to be created and applied, hence PEF-NG license is required
Responda
  • Only the master controller since role and firewall policies are created here.
  • Only the local controllers since firewall policies are applied here
  • The master and all three local controllers
  • This isn't the correct license for this purpose, use PEF-VPN license
  • This is not needed because PEF-NG is part of base OS

Questão 6

Questão
What information do you need to generate a feature license key for an Aruba controller?
Responda
  • The controller's MAC address and the feature description
  • Controller's MAC address and the certificate number
  • Controller's Serial Number and the feature description
  • Controller's Serial Number and the certificate number
  • Controller's MAC address and Serial Number

Questão 7

Questão
What are the PEF-NG license limits based on?
Responda
  • Number of APs
  • One license per controller
  • Number of users
  • Number of local controllers
  • Master Controller total user count

Questão 8

Questão
Which of the following licenses are consumed by Mesh APs advertising an SSIDs?
Responda
  • AP license
  • Mesh license
  • PEF-V license
  • No license is required
  • RAP License

Questão 9

Questão
The permanent licenses on the controller will be deleted with the use of which command?
Responda
  • Delete license
  • Write erase
  • Licenses cannot be deleted once activated
  • Write erase all
  • Reboot delete all

Questão 10

Questão
A network administrator wants to terminate VPN sessions on a local controller in the DMZ. Which statement is true about the PEF-VPN license?
Responda
  • It is only applied to the master controller
  • It is only applied to the DMZ controller.
  • It is based on the number of APs
  • One license is needed on the master and the DMZ local
  • It is distributed by the license server as needed

Questão 11

Questão
What is the best practice regarding licensing for a backup master to support Master Redundancy in a network without centralized licensing?
Responda
  • Backup master only requires the AP license
  • Supported limits and installed licenses should be the same on primary master and backup Master
  • Licenses are pushed from the primary to the backup Master along with the configuration
  • The Backup Master does not require licenses to support master redundancy
  • On the backup only one license of each typeis needed.

Questão 12

Questão
Which of the following licenses can be included in the licensing pool for centralized licensing? (Choose three)
Responda
  • Factory default licenses
  • PEFNG license
  • Evaluation licenses
  • RFProtect license
  • PEFV license

Questão 13

Questão
By default Centralized licensing messages between master controllers are sent
Responda
  • In the clear unencrypted
  • Using CPSec
  • Using IPSec site to site VPN tunnels
  • Encrypted using GRE
  • PAPI

Questão 14

Questão
Which of the following will occur if a master license server fails with no standby server present? (Choose two)
Responda
  • Local controllers licenses will continue to be valid for 30 days
  • Local controllers will immediately remove all installed licenses
  • No licenses will be sent to any new controllers that come online
  • All licenses go back into the pool for redistribution
  • A Local Controller elects itself master license server

Questão 15

Questão
Which may be applied directly to an VLAN interface? (Choose three)
Responda
  • Access List (ACL)
  • Firewall Policy
  • Roles
  • AAA profiles
  • RF Plan Map

Questão 16

Questão
When creating a firewall rule on an Aruba controller, which parameter is optional?
Responda
  • Destination
  • Service
  • Source
  • Log
  • Action

Questão 17

Questão
An administrator creates a WLAN with an unmodified default AAA profile. What is the default role the user is placed in?
Responda
  • default-logon
  • logon
  • guest-logon
  • default-ap
  • AP-Role

Questão 18

Questão
What is the first role a user is given when a user associates to an open WLAN?
Responda
  • The guest post authentication role
  • The initial role in the captive portal profile
  • The role in the server group profile
  • The initial role in the AAA profile
  • The initial role in the 802.1x profile

Questão 19

Questão
Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose two)
Responda
  • AAA default role for authentication method
  • Server Derivation Rule
  • Vendor Specific Attributes
  • AP Derivation Rule
  • The Global AAA profile

Questão 20

Questão
Which describe "roles" as used on Aruba Mobility Controllers? (Choose two)
Responda
  • Roles are assigned to users.
  • Roles are applied to interfaces.
  • Policies are built from roles.
  • A user can belong to only one role at a time.
  • Roles are a set of authentication rules

Questão 21

Questão
Which netdestination aliases are built into the controller? (Choose three)
Responda
  • logon
  • any
  • user
  • guest
  • localip

Questão 22

Questão
What are aliases used for?
Responda
  • Improve controller performance
  • Simplify the configuration process
  • Tie IP addresses to ports
  • Assign rules to policies
  • Assign policies to roles

Questão 23

Questão
Which of the following firewall rules allows a user to initiate an ICMP session to other devices? (Choose two)
Responda
  • localip any svc-icmp permit
  • user any svc-icmp permit
  • user user svc-icmp permit
  • any any svc-icmp permit
  • mswitch any svc-icmp permit

Questão 24

Questão
The Aruba Policy Enforcement Firewall (PEF-NG) module supports destination network address translation (dst-nat). Which is the default use of this statement in an Aruba controller configuration?
Responda
  • Source the IP addresses of users to specific IP address
  • Redirect HTTP sessions to Captive Portal
  • Redirect Access Points to another Aruba controller
  • Provide a telnet connection to the controller
  • Redirect a SSH session to terminate on the controller

Questão 25

Questão
The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat). Which is a use of this statement in an Aruba configuration?
Responda
  • Provide a single source IP address for users in a role
  • Redirect Captive Portal HTTP sessions
  • Redirect Access Points to another Aruba controller
  • Provide IP addresses to clients
  • Redirects clients to Aruba Firewall

Questão 26

Questão
The network administrator wishes to terminate the VPN encryption on the Aruba controller. When writing a firewall rule to accomplish the task of automatically moving the VPN traffic for the wireless clients from a third party VPN concentrator to an Aruba controller, which action needs to be configured in the rule?
Responda
  • redirect to IPSec Group
  • source NAT
  • destination NAT
  • redirect to tunnel
  • redirect to GRE

Questão 27

Questão
Review the following truncated output from an Aruba controller for this item. (example) #show rights logon access-list List ---------------- Position Name Location -------- ---- -------- 1 logon-control 2 captiveportal logon-control ------------- Priority Source Destination Service Action -------- ------ ----------- ------- ------ 1 user any udp 68 deny 2 any any svc-icmp permit 3 any any svc-dns permit 4 any any svc-dhcp permit 5 any any svc-natt permit captiveportal ------------- Priority Source Destination Service Action -------- ------ ----------- ------- ------ 1 user controller svc-https dst-nat 8081 2 user any svc-http dst-nat 8080 3 user any svc-https dst-nat 8081 4 user any svc-http-proxy1 dst-nat 8088 5 user any svc-http-proxy2 dst-nat 8088 6 user any svc-http-proxy3 dst-nat 8088 Based on the above output from an Aruba controller, an unauthenticated user assigned to the logon role attempts to start an http session to IP address 172.16.43.170. What will happen?
Responda
  • the user's traffic will be passed to the IP address because of the policy statement: user any svc-http dst-nat 8080
  • the user's traffic will be passed to the IP address because of the policy statement: user any svc-https dst-nat 8081
  • the user's traffic will be passed to the IP address because of the policy statement: user any svc-http-proxy1 dst-nat 8088
  • the user will not reach the IP address because of the policy statement: user any svc-http dst-nat 8080
  • the user will not reach the IP address because of the implicit deny any any at the end of the policy.

Questão 28

Questão
Refer to the following configuration segment for this item. ip access-list session anewone user network 172.16.1.0 255.255.255.0 any permit user host 172.16.1.1 any deny user any any permit An administrator wants users to have access to all destinations except 172.16.1.1. Based on the above Aruba Mobility Controller configuration segment, which statements best describe this policy? (Choose two)
Responda
  • The rule user host 172.16.1.1 any deny is redundant because of the implicit deny all at the end.
  • The rule user network 172.16.1.0 255.255.255.0 any permit is redundant.
  • The two rules user network 172.16.1.0 255.255.255.0 any permit and user host 172.16.1.1 any deny need to be re-sequenced.
  • The last statement user any any permit is not required
  • The last statement should be any any any deny

Questão 29

Questão
Refer to the following configuration segment for this item. netdestination "internal" no invert network 172.16.43.0 255.255.255.0 position 1 range 172.16.11.0 172.16.11.16 position 2 ! ip access-list session "My-Policy" alias "user" alias "internal" service_any permit queue low ! A user frame is evaluated against this firewall policy with the following attributes: Source IP: 172.17.49.3 Destination IP: 10.100.86.37 Destination Port: 80 Referring to the above file segment, how will the frame be handled by this firewall policy?
Responda
  • The frame will be dropped because of the implicit deny all at the end of the netdestination definition.
  • The frame will be dropped because of the implicit deny all at the end of the firewall policy
  • The frame will be forwarded because of the implicit permit all at the end of the firewall policy.
  • The frame will be passed because there is no service specified in the firewall policy.
  • The frame will be dropped because there is no service specified in the firewall policy.

Questão 30

Questão
ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user any any permit host 10.1.1.1 host 10.2.2.2 any deny A user sends a frame with the following attributes: Source IP: 10.1.1.1 Destination IP: 10.2.2.2 Destination Port: 25 Based on the above Mobility Controller configuration file segment, what will this policy do with the user frame?
Responda
  • The frame is discarded because of the implicit deny all at the end of the policy.
  • The frame is discarded because of the statement: user host 10.1.1.1 host 10.2.2.2 deny.
  • The frame is accepted because of the statement: user any any permit.
  • The frame is accepted because of the statement: user network 10.1.1.0 255.255.255.0 any permit.
  • This is not a valid policy.

Questão 31

Questão
ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny user any any permit Referring to the above portion of a Mobility Controller configuration file, what can you conclude? (Choose two)
Responda
  • This is a session firewall policy.
  • This is an extended Access Control List (ACL).
  • Any traffic going to destination 10.1.1.1 will be denied.
  • Any traffic going to destination 10.2.2.2 will be denied.
  • Any traffic going to destination 172.16.100.100 will be permitted.

Questão 32

Questão
Which of these are NOT a client attribute that can be configured in user derivation rules?
Responda
  • MAC address
  • DHCP option value
  • BSSID
  • Filter ID
  • encryption

Questão 33

Questão
What are the types of user derivation rules that can be applied to a user? (Choose two)
Responda
  • SSID
  • MAC
  • VLAN
  • Role
  • AP

Questão 34

Questão
Which is a Device Specific Attribute that can be evaluated in a user derivation rule?
Responda
  • user login name
  • authentication server
  • location by AP Name
  • controller Loopback address
  • controller IP

Questão 35

Questão
Which match condition can be used by a server derivation rule? (Choose two)
Responda
  • greater than
  • less than
  • inverse of
  • contains
  • equals

Questão 36

Questão
An administrator wants to assign a VLAN to a user based upon the authentication process using Vendor Specific Attributes (VSA). Where are Aruba Vendor Specific Attribute (VSA) values provisioned?
Responda
  • controller
  • client
  • RADIUS server
  • Internal user database
  • Option 60 of DHCP reply

Questão 37

Questão
View the Server group screen shot above. A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server "RadiusMiami". There is no Radius synchronization and both servers are reachable. What happens when the user attempts to authenticate?
Image:
8e4483fc-8824-4a01-ade8-57d99ab4a4fd (image/jpg)
Responda
  • The controller recognizes the users Domain and sends the authentication request directly to RadiusMiami.
  • The request is initially sent to RadiusNY1 then RadiusNY1 redirects the controller to send the authentication request to RadiusMiami
  • RadiusNY1 receives the request and returns a deny. No other action is taken.
  • RadiusNY1 receives the request and returns a deny. The authentication request will then be sent to RadiusMiami.
  • The RadiusNY1 sends the request to RadiusMiami that replies to the controller

Questão 38

Questão
View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of "employee". The user was placed in the guest Role. What statements below are correct? (Choose two)
Image:
a7cfc997-44bc-46ed-b48e-96fff1831749 (image/jpg)
Responda
  • The user was placed in the 802.1x authentication default Role guest
  • The user was placed in the initial Role guest
  • Role derivation failed because roles are case sensitive
  • Role derivation failed because the incorrect operation "value-of" was used
  • 802.1x authentication failed so the user was automatically placed in the guest Role

Questão 39

Questão
View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of "employee". What Role will the user get?
Image:
4d338ff4-17cb-41c7-bffe-06d8a7c97946 (image/jpg)
Responda
  • The User will get the Emp Role
  • The User will get the 802.1x authentication default Role
  • The User will get the employee Role
  • The User will get the Employee Role
  • The User will get the initial Role

Questão 40

Questão
Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP? (Choose three)
Responda
  • Virtual-AP profile
  • WLAN profile
  • 802.1x authentication profile
  • AP System Profile
  • SSID Profile

Questão 41

Questão
A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?
Responda
  • Captive Portal has not been assigned in the SSID profile.
  • The Captive portal profile has not been assigned to the AAA profile.
  • A server group has not been assigned to the captive portal profile
  • An initial role has not been assigned to the AAA profile.
  • The Captive portal profile has not been assigned to the initial role.

Questão 42

Questão
Which of the following will accept named VLANs as a parameter? (Choose three)
Responda
  • Virtual AP profile
  • User derivation rule for a single VLAN
  • Server derivation rule for a single VLAN
  • Server derivation rule for a VLAN Pool
  • Access VLAN for a VLAN Pool

Questão 43

Questão
A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn't yet transitioned to the AP active table in the controller. The customer suspects that the AP is not setting up its VPN connection successfully. Which of the following commands might be useful in troubleshooting this? (Choose three)
Responda
  • Logging level debugging security process localdb
  • Logging level debugging security process l2tp
  • Logging level debugging security process dot1x
  • Logging level debugging security process crypto
  • Logging level debugging security process vpn

Questão 44

Questão
The screen captures below show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication fails and user authentication passes, which role will be assigned?
Image:
28fca8db-831a-4026-8d06-0b285a05aa01 (image/jpg)
Responda
  • employee
  • guest
  • contractor
  • logon
  • no role is assigned

Questão 45

Questão
The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication passes and user authentication fails, which role will be assigned?
Image:
f1b251e0-6eae-4981-b531-ee3a5844b859 (image/jpg)
Responda
  • employee
  • guest
  • contractor
  • logon
  • no role is assigned

Questão 46

Questão
The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication fails and user authentication fails, which role will be assigned?
Image:
633df450-6782-4078-b968-82eddea71615 (image/jpg)
Responda
  • Employee
  • Guest
  • Captive Portal
  • Logon
  • No role will be assigned

Questão 47

Questão
What can NOT be configured from the Aruba controller configuration wizards?
Responda
  • Controller IP
  • Boot Partition
  • User firewall policy
  • User derivation rules.
  • Radius Servers

Questão 48

Questão
An administrator is setting up a factory default controller. No new AP groups were created. When adding a WLAN SSID in the Campus WLAN wizard what AP group is available?
Responda
  • The air-monitors AP group
  • The logon AP group
  • The default AP group
  • The initial AP group
  • The Spectrum AP group

Questão 49

Questão
The reusable Aruba Controller wizards are accessible in what way?
Responda
  • Only on startup through the CLI
  • Through the CLI, after the initial CLI wizard has been completed
  • In the Web UI under maintenance.
  • In the Web UI under configuration.
  • Must be initialized from CLI first.

Questão 50

Questão
The Contrtoller wizard enables which of the following controller clock configurations? (Choose three)
Responda
  • NTP to a time server
  • Set time zone
  • Daylight savings time
  • Only GMT can be configured
  • Manual configuration of date and time

Questão 51

Questão
When configuring ports in the Controller wizard, which of the following are NOT configuration options? (Choose two)
Responda
  • Inter-VLAN routing
  • Speed
  • Trusted
  • LACP
  • Trunk

Questão 52

Questão
By default, which CLI based remote access method is enabled on Aruba controllers?
Responda
  • RSH
  • Telnet
  • SSH
  • Telnet and SSH
  • Telnet, SSH and RSH

Questão 53

Questão
An Aruba controller can be accessed with which CLI based remote access methods? (Choose two)
Responda
  • RSH
  • Telnet
  • SSH
  • SFTP
  • SCP

Questão 54

Questão
As an admin/root user, what other type of role-based management users can be created on Aruba controllers?
Responda
  • Auditing-compliance user
  • AirWave management user
  • Reporting Generation user
  • Guest provisioning user
  • Maintenance user

Questão 55

Questão
Which log type should be enabled to troubleshoot IPSec authentication issues on Aruba Controllers?
Responda
  • Security Logs
  • Management Logs
  • Wireless Logs
  • IDS Logs
  • System Logs

Questão 56

Questão
Exhibit: Referring to the above screen capture, if an administrator desires to change a specific AP into a Spectrum Monitor without assigning the AP to a new group, which menus could be used?
Image:
72a5b565-7d79-4fb8-9ba6-addceb778208 (image/jpg)
Responda
  • Network > Controller
  • Wireless > AP Configuration
  • Wireless > AP Installation
  • Advanced Services > Wireless
  • Wizards > WIP Wizard

Questão 57

Questão
A customer forgot all passwords for a controller. What method could you use to reset the passwords?
Responda
  • Telnet to the controller and login to the password recovery account
  • SSH to the controller and login to the password recovery account
  • Connect directly to the serial console and login to the password recovery account
  • Interrupt the boot process at CP-boot and select password recovery
  • Open the controller and press the reset switch

Questão 58

Questão
With CPSec disabled, which tunnel protocol is used between APs and Controllers in an Aruba environment?
Responda
  • Basic IP
  • GRE
  • IPinIP
  • Mobile IP
  • IPSec

Questão 59

Questão
In an Aruba controller based system, the L3 mobility tunnel exists between the home agent and which other element?
Responda
  • the default gateway
  • the remote AP
  • the foreign agent
  • the mobile node
  • the foreign switch

Questão 60

Questão
When an 802.11 client roams what device decides when to move the client to another AP?
Responda
  • Aruba AP
  • Aruba controller
  • Client
  • Radius Server
  • Router

Questão 61

Questão
Exhibit: The above diagram has one master and three local controllers. AP1 GRE terminates on controller Local 1. All controllers are configured with the wireless user VLAN 201. A wireless user associates with AP 1. Only L2 mobility is enabled. Which elements will know about this association?
Image:
52b24118-9bf2-4bc4-988f-3b9fd6009e81 (image/jpg)
Responda
  • Local 1 only
  • Local 1 and the Master
  • Local 1 and Local 2 and the Master
  • Local 1 and AP1
  • All Controllers

Questão 62

Questão
Which command will show all client association history?
Responda
  • Aruba-6000# show mobile trail current (ip address)
  • Aruba-6000# show ip mobile trail (ip address)
  • Aruba-6000# show ap client status (mac address)
  • Aruba-6000# show current client ip (ip address)
  • Aruba-6000# show client ip (ip address) mobility

Questão 63

Questão
With CPSec enabled, which tunnel protocol is used between APs and Controllers in an Aruba environment?
Responda
  • EAP
  • SSH
  • IPinIP
  • Mobile IP
  • IPSec

Questão 64

Questão
By default, how long will an AP scan a single channel when ARM is enabled?
Responda
  • 80 milliseconds
  • 90 milliseconds
  • 100 milliseconds
  • 110 milliseconds
  • 200 milliseconds

Questão 65

Questão
Which actions does ARM (Adaptive Radio Management) perform? (Choose two)
Responda
  • Allows controllers to provision the AP Radio type
  • Allows controllers to provision the best channel for APs
  • Allows controllers to provision the best power setting for APs
  • Allows controllers to provision allowed Radio bands
  • Allows controllers to provision lower power when unauthorized APs are detected

Questão 66

Questão
Which of the following metrics does the ARM feature use to calculate the optimal channel and power level for Access Points? (Choose two)
Responda
  • RF Spectrum Index
  • Priority Index
  • Interference Index
  • Coverage Index
  • Frequency Index

Questão 67

Questão
How does the ARM Band Steering feature encourage 5GHz capable clients to move/connect to the 5GHz radios of Aruba APs?
Responda
  • ARM suppresses the probe response on the 2.4 GHz radio
  • ARM utilizes third party software on the wireless clients
  • Current Wi-Fi chipset firmware supports this by default
  • It's not possible the move clients to 5GHz radios when they can see both 2.4 and 5GHz APs
  • ARM disables the 2.4Ghz radio for the specified client

Questão 68

Questão
Which of the statements below are TRUE regarding ARM's Spectrum Load Balancing feature? (Choose two)
Responda
  • Available only on 5GHz radios
  • Disabled by default
  • Balances client load across available channels/APs
  • Enabled by default
  • Available only on 2.4GHz radios

Questão 69

Questão
What is the function of Band Steering?
Responda
  • Balancing clients across APs on different channels within the same band
  • Encourages clients, 5GHz capable, to connect on the 5GHz spectrum
  • Coordinate access to the same channel across multiple APs
  • Enables selection of 20 vs. 40 MHz mode of operation per band
  • Enables acceptable coverage index on both the "b/g" and "a" spectrums

Questão 70

Questão
What are the Airtime Allocation Policy options for Airtime Fairness? (Choose three)
Responda
  • Default Access
  • Priority Access
  • Fair Access
  • Preferred Access
  • Distributed Access

Questão 71

Questão
Which of the following statements is true of Spectrum Mode?
Responda
  • No licenses are required to run an AP in Spectrum mode
  • Spectrum mode can only be configured for one AP at a time
  • An AP can be in spectrum mode for both 2.4 and 5G bands at the same time
  • An AP can be placed in Spectrum Mode via the Spectrum Profile
  • Spectrum mode can be configured from the GUI under AP installation

Questão 72

Questão
Which ARM feature addresses the issue of sticky clients by moving clients to associate to APs with better 802.11 signal quality?
Responda
  • Co-Channel interference mitigation
  • Airtime Fairness
  • ClientMatch
  • Coordinated access to a single channel
  • Band Steering

Questão 73

Questão
Aruba Client Match does NOT use which of the following parameters to determine the best AP for a client connection? (Choose two)
Responda
  • Device type
  • Location
  • Signal to Noise Ratio
  • Access Point load
  • Spectrum Analysis

Questão 74

Questão
Which settings cannot be modified directly from a local controller?
Responda
  • Port VLAN setting
  • Switch Time Zone
  • Port trusted
  • Roles
  • SNMP Enable Trap Generation

Questão 75

Questão
Masters communicate configuration information with locals using which tunnel type?
Responda
  • GRE
  • IP in IP
  • Provision Tunnel Protocol
  • IPSec
  • PPTP

Questão 76

Questão
In the above screen capture: The administrator notes that most of the configuration options are grayed out and have no action. What is the cause of the problem?
Image:
3369be1a-229b-43bb-97f1-c2e14ff91028 (image/jpg)
Responda
  • attempting to make global changes on a Master Controller
  • attempting to make global changes on a Local Controller
  • this change can only be performed via the CLI
  • does not have the correct software license
  • there is an error in the configuration

Questão 77

Questão
Exhibit: Referring to the above screen capture, on which Controller can you create a vlan?
Image:
abc1f334-044e-496d-b640-8f94de71a384 (image/jpg)
Responda
  • Controller 10.1.11.100 only
  • Controller 10.1.11.101 and 10.254.1.3 only
  • All three Controllers
  • None of the Controllers
  • Controller 10.254.1.101 only

Questão 78

Questão
Exhibit: Referring to the above screen capture, on which controller can you add an administrative user and assign a controller management role?
Image:
0acafb73-2ea9-4a6b-8f45-07d0fae67d3c (image/jpg)
Responda
  • Controller 10.1.11.100 only
  • Controller 10.1.11.101 and 10.254.1.3 only
  • All three Controllers
  • Must be done in the RADIUS server
  • Controller 10.254.1.101 only

Questão 79

Questão
Exhibit: By default, which controller's internal database will be used for user authentication?
Image:
079a792d-9698-4300-b40c-05e8b9873550 (image/jpg)
Responda
  • Controller 10.1.11.100 only
  • Controller 10.1.11.101 and 10.254.1.3 only
  • All three Controllers
  • You can't tell from this screen
  • The Controller with the user session

Questão 80

Questão
Exhibit: Referring to the above screen capture, on which controller can you modify APs configuration to enable ARM?
Image:
a4800f2c-075a-4d06-a169-80eb623acd9d (image/jpg)
Responda
  • Controller 10.1.11.100 only
  • Controller 10.1.11.101 and 10.254.1.3 only
  • All three Controllers
  • None of the Controllers
  • On Controllers where ARM is enabled

Questão 81

Questão
With CPSec disabled, Aruba access points are Layer 3 connected to controllers using which protocol?
Responda
  • 802.1q
  • LWAPP
  • PPTP
  • GRE
  • HTTPs

Questão 82

Questão
With CPSec disabled, which encryption protocol does a tunnel mode campus AP use on client traffic?
Responda
  • TKIP and AES
  • It is provisioned by the Administrator
  • WEP and AES
  • WEP, TKIP, and AES
  • No encryption is used

Questão 83

Questão
In a campus environment, where are encryption keys sent or stored when users roam between tunneled mode APs on the same controller using 802.1X?
Responda
  • sent to the new AP via GRE
  • sent to the new AP via IPSec
  • stored on the controller
  • stored on the RADIUS server
  • original AP sends keys to new AP

Questão 84

Questão
In the diagram provided for this question, the wireless user's laptop is associated with an Aruba AP in tunnel forwarding mode. The AP terminates on the local controller. When the client transmits, where will the 802.11 headers be removed?
Image:
84e40bd7-6b86-4150-982c-8f663cf9ade2 (image/jpg)
Responda
  • AP
  • L2 Switch
  • Router
  • Controller
  • Internet

Questão 85

Questão
When configuring a server group containing 3 servers, a customer chooses 'fail through mode'. What other configuration option has to be enabled on the controller for this to work with 802.1x authentication?
Responda
  • Machine authentication
  • EAP Termination
  • Server group fall through mode
  • MAC authentication
  • Round robin or top down mode

Questão 86

Questão
A campus AP has been provisioned with a VAP in bridge forwarding and standard operation modes. Which of the following authentication types are supported? (Choose two)
Responda
  • 802.1X authentication
  • Open System authentication
  • Local authentication
  • Captive portal authentication
  • VPN authentication

Questão 87

Questão
Which method is NOT supported to provision an Aruba campus AP?
Responda
  • Telnet directly to AP
  • SSH to the AP's controller
  • Web interface to the AP's controller
  • Console to AP
  • CLI on controller

Questão 88

Questão
When direct consoled to an AP, what is the command sequence to factory default the AP and rebootstrap?
Responda
  • setenv bootstat init
  • setenv master init, boot
  • purge, save, boot
  • init, save, boot
  • print, purge, boot

Questão 89

Questão
What settings need to be changed on a factory default AP in order for it to use ADP to discover the Aruba Controller?
Responda
  • DNS of the controller
  • Static route
  • AP group
  • enable multicast
  • no changes needed

Questão 90

Questão
As illustrated in the above diagram, a company has two campus locations and a building headquarters all located in different cities. Following best practices, what would be the best way to construct mobility domains for the company?
Image:
78ba69f4-2007-466d-9a09-e6ce49c89c07 (image/jpg)
Responda
  • Buildings (1, 2) in one domain and Buildings (3, 4, 5, 6) in one domain
  • Buildings (1, 2) in one domain, Building (3) in one domain, and Buildings (4, 5, 6) in one domain
  • Buildings (1, 2, 4, 5, 6) in one domain and Building (3) in one domain
  • Buildings (1, 2, 3, 4, 5, 6) in one domain
  • Buildings (1) in one domain building (4) in one domain

Questão 91

Questão
How many Aruba controllers can be added to a single mobility domain?
Responda
  • 64 controllers of any type
  • 128 controllers supporting 2000 users
  • 256 controllers with no more than 1024 subnets
  • Controllers supporting up to 6000 AP's
  • There is no controller limit

Questão 92

Questão
In a master-local controller scenario, where is the mobility domain defined?
Responda
  • the AP group
  • the master controller
  • the local controller
  • the master and the local controllers
  • the master and the local controllers where roaming is needed

Questão 93

Questão
A university has 2 departments. Department 1 has its own mobility domain with one controller. Department 2 has multiple controllers configured in a second domain. The university is planning on offering a new application and needs users to be able to roam between both mobility domains. What is the best way to accomplish this?
Responda
  • The 2 existing domains should be left as they are. A 3rd mobility domain should then be created and all 3 controllers need to be added to it
  • Merge the controllers into the same mobility domain
  • The IP subnets of all controllers need to be configured to match
  • This cannot be accomplished
  • Create a new domain between a department 1 controller and one of the department 2 controllers

Questão 94

Questão
A port firewall policy is applied to a trunk port that denies controller access. An "allow all" Vlan firewall policy is applied to VLAN 33 on the same port. A user connected to VLAN 33 on that port attempts to gain access to the controller. Which of the following statements is true?
Responda
  • The Port policy is applied, therefore no controller access
  • The Vlan policy is applied, then the port policy, therefore no controller access
  • The Vlan policy is applied, therefore access to the controller is allowed
  • You cannot place a firewall policy on a Ports Vlan when the Port already has a policy, therefore no controller access
  • When locally connected to a controller's port you always have controller access

Questão 95

Questão
An access port has been placed in trusted mode. The Vlan on the port is in Untrusted mode. Which of the following statements is true?
Responda
  • The traffic is trusted since the port is trusted
  • The traffic is untrusted since the VLAN is untrusted
  • This is an invalid configuration, both must be set the same
  • You cannot set Vlans as trusted or untrusted
  • Only traffic from that specific port is trusted, all other traffic is untrusted

Questão 96

Questão
A wired device is connected to an untrusted port on a controller. How can a role be assigned to the device?
Responda
  • An initial Role can be assigned directly to the VLAN
  • Roles are assigned to devices connected to a trusted port
  • A default Role can be directly assigned to an untrusted port
  • Adding a wired AAA profile to a VLAN on the untrusted port
  • The Role assigned to the untrusted port

Questão 97

Questão
A port on a controller has been configured as untrusted. No wired access AAA profile or Global AAA profile is configured. When a user connects to that port which of the following statements is true?
Responda
  • Since there is no wired access AAA profile, only port policies will be applied
  • The user will fall into the default wired access AAA profile and will be given the initial role.
  • Since there is no wired access AAA profile or Global AAA profile the user will be given the logon role.
  • When configuring the port as untrusted, an error message of "no wired access AAA profile exists" Therefore this is an invalid configuration
  • the user is denied all access automatically because no wired access AAA or Global AAA profile is assigned

Questão 98

Questão
Which method can APs use to discover a controller?
Responda
  • DHCP
  • Dynamic DNS (DDNS)
  • PnP
  • PAPI
  • HTTPS

Questão 99

Questão
When APs boot up, in which order do they discover a controller?
Responda
  • DNS, DHCP, ADP multicast, ADP unicast, static
  • static, DNS, DHCP, ADP broadcast, ADP multicast
  • static, DHCP, ADP multicast, ADP broadcast, DNS
  • static, DHCP, DNS, ADP multicast, ADP broadcast
  • DNS, static, ADP multicast, ADP broadcast

Questão 100

Questão
An AP is not communicating with the controller. Upon investigation you find that the AP is not discovering its controller through DNS. Instead, it received a DHCP reply with option 43 specifying the SIP server's IP address. How do you resolve this problem?
Responda
  • Statically configure the AP to ignore Option 43
  • Remove the option 43 configuration on the DHCP server
  • Statically configure the AP to only use DNS resolution and not other dynamic discovery methods
  • After failing option 43 the AP should have proceeded with ADP, therefore the AP is faulty and needs to be replaced
  • The AP should be purged

Questão 101

Questão
How is an AP redirected to a Local controller after DNS resolution returns the Master's IP address?
Responda
  • Master looks at the AP-Group and CONTROLLER-IP attributes
  • Master looks at the AP-Group and LMS-IP attributes
  • In the AP-provisioning screen, the LMS-IP attribute must be set
  • The AP must be statically configured to find the local controller
  • In the AP-provisioning screen, set the CONTROLLER-IP attribute

Questão 102

Questão
An AP was configured and assigned to an AP group then powered off for over a week. When the AP is redeployed, what previous configuration will it retain?
Responda
  • It's AP name and AP Group
  • It's Serial Number
  • The controller's IP address
  • After a few days all configurations are lost
  • The controller IP address and the AP Group

Questão 103

Questão
A 3600 controller has 64 PEF-NG license, 128 AP licenses and 1 RFProtect license. How many AP's can terminate on the controller?
Responda
  • 1 Campus APs
  • 64 Campus APs
  • 128 Remote APs
  • 256 Remote APs
  • 512 Remote APs

Questão 104

Questão
A 3200 controller has 16 AP licenses,16 PEF-NG licenses, 16 RFProtect licenses. There are 10 Campus APs terminating on the controller. How many remote AP's can terminate on the controller?
Responda
  • 6
  • 12
  • 16
  • 24
  • 32

Questão 105

Questão
Centralized licensing is not enabled in a network of 1 Master and 2 Local controllers, what should be the license count on all controllers to terminate 8 APs on each Local controller and support Local redundancy?
Responda
  • 16 AP license on all controllers
  • 8 AP license on Master and 16 AP license on both locals
  • 8 AP license on all controllers
  • 1 AP license on Master and 16 AP license on both locals
  • 16 AP licenses on the Locals

Questão 106

Questão
An 7240 controller is Licensed for 560 APs. The controller has 500 Campus APs terminating on the controller. How many Remote APs can terminate on this controller?
Responda
  • 12
  • 24
  • 48
  • 60
  • 120

Questão 107

Questão
An Aruba Controller is configured with VLAN 1,5, 200, and 4095. All VLANs have IP addresses assigned. Which is the default management VLAN on the Aruba controller?
Responda
  • VLAN 5
  • VLAN 1
  • VLAN 200
  • None, it must be defined
  • VLAN 4095

Questão 108

Questão
Which of the following statements is true?
Responda
  • Aruba Campus APs must be physically attached to the Aruba Controller
  • Aruba Campus APs must be in the same broadcast domain as the Controller.
  • Aruba Campus APs can be in different subnets from the Controller
  • Aruba Campus APs must be physically attached to the same Layer 3 switch
  • Aruba Campus APs can be connected directly to the public internet.

Questão 109

Questão
Exhibit: Referring to the diagram provided for this question, in which locations must you define the new data VLANs for wireless client traffic? (Choose two)
Image:
9480d04d-0001-4109-b388-b763c370849e (image/jpg)
Responda
  • in all L2 switches where an Aruba AP is physically connected
  • in all APs and the L2 switches to which they are connected
  • in the Aruba controller and the router it's connected to in an L2 deployment
  • in the routers and switches where the APs are physically connected
  • only on the Aruba controller in an L3 deployment

Questão 110

Questão
A controller is provisioned in L3 Mode for Wireless Users. What must be configured on the controller to enable DHCP requests to an external DHCP server?
Responda
  • an IP helper command
  • the IP address of the DNS server
  • the IP address of the APs
  • the subnet address of the DHCP server
  • the DHCP server IPSEC Key

Questão 111

Questão
Which parameter(s) does a Master controller use to determine where a provisioned AP should terminate its GRE tunnel?
Responda
  • the IP address of the AP
  • the MAC address of the AP
  • the IP address of the switch nearest to the AP
  • the name and group settings of the AP
  • the VLAN the AP is attached to

Questão 112

Questão
Which of the following configurations can accept a VLAN pool? (Choose two)
Responda
  • Trunk native VLAN
  • Virtual AP profile
  • User Role
  • Server derived role
  • FW Policies

Questão 113

Questão
What does Aruba Layer 3 redundancy require to operate?
Responda
  • LMS-IP
  • Backup LMS-IP
  • VRRP
  • Backup AP group
  • ARM

Questão 114

Questão
Exhibit: In the diagram provided for this question, the client laptop is associated with the Aruba AP. The Aruba controller is configured to perform L2 switching for this SSID. What will be the client laptop default gateway?
Image:
9c0f30b1-71e2-4f06-bae0-54cebf472278 (image/jpg)
Responda
  • A
  • B
  • C
  • D
  • E

Questão 115

Questão
In the diagram provided for this question, the Aruba controller terminates one end of a GRE tunnel that carries wireless user traffic. Where does the other end terminate?
Image:
07e9f075-29f7-4a20-8971-4409ca631a57 (image/jpg)
Responda
  • A
  • B
  • C
  • D
  • A or B

Questão 116

Questão
In the above diagram, the system shows two Aruba access points and a wired user. Which VLAN(s) do NOT need to be configured on link A between the L2 switch and router to support the wireless users?
Image:
c5c2a484-3d96-404c-ab43-b7360ce77ba9 (image/jpg)
Responda
  • 101 and 102
  • 101 and 103
  • 102 and 103
  • only 101
  • only 103

Questão 117

Questão
In the above diagram, the system shows two Aruba access points. Which VLANs must be configured on trunk link D between the router and Aruba controller to support wireless users when the controller is provisioned for L2 operations?
Image:
b6de69c5-96ae-4386-8cde-5d2af40e8d3d (image/jpg)
Responda
  • 10, 101 and 102
  • 101 and 102
  • 101, 102 and 103
  • 10, 101,102 and 103
  • 10 and 103

Questão 118

Questão
Exhibit: Referring to the diagram provided for this question, if the Aruba controller is configured to perform L3 switching, what will be the wireless client laptop default gateway?
Image:
b400c8d4-2d70-4470-a5d6-97296693c7dc (image/jpg)
Responda
  • A
  • B
  • C
  • D
  • E

Questão 119

Questão
When configuring Captive Portal, which protocols are supported when accessing the Captive Portal? (Choose two)
Responda
  • HTTPS
  • VPN
  • HTTP
  • TELNET
  • SSH

Questão 120

Questão
When the controller is configured for Captive Portal and the user is only required to provide an email address for authentication, which option is configured in the GUI?
Responda
  • enable termination
  • enable guest logon
  • enable user logon
  • eap method
  • disable CP Login

Questão 121

Questão
A user logged in with the Captive Portal settings shown in the above screen capture. What does the user need to do to logout?
Image:
9ae9032d-f285-431a-8d42-a01be985188d (image/jpg)
Responda
  • wait 30 minutes then logout
  • wait 60 minutes then logout
  • click Logout on the browser screen
  • he cannot logout
  • wait 10 seconds for redirect

Questão 122

Questão
Screenshots of the Captive Portal authentication profile and server group of a guest network are displayed above. How was the user authenticated?
Image:
d8a0cb5e-dece-4acb-bffb-73deb4fa3caa (image/jpg)
Responda
  • with a radius server called Radius01
  • with the Internal database
  • with a radius server called Internal
  • with another form of authentication
  • user wasn't authenticated against any server

Questão 123

Questão
Where should mobility domains be enabled in a network with 1 master, 1 backup master and 5 local controllers?
Responda
  • Only on the master controller
  • All the local controllers in the network
  • All the controllers where the client is allowed to roam
  • Master and backup master
  • Only on the backup master

Questão 124

Questão
What are two different methods of configuring AP redundancy between 2 local controllers? (Choose two)
Responda
  • Fast-Failover
  • Configure the locals as remote nodes
  • Use named VLANS
  • LMS and Backup LMS IP
  • AP Redundancy can only be configured between a Master and Local

Questão 125

Questão
An Aruba 650 controller is functioning as a standby Master. How many APs can it control while in standby mode?
Responda
  • 0
  • 16
  • 24
  • 128
  • 256

Questão 126

Questão
Aruba pair of 3200XM controllers are licensed to their maximum and are configured as a VRRP pair. Each controller terminates 24 APs. One of the controllers fails. How many of the APs from the failed controller can fail over to the remaining controller?
Responda
  • 8
  • 16
  • 32
  • 48
  • 96

Questão 127

Questão
Which protocol does the Aruba controller utilize for controller redundancy?
Responda
  • HSRP
  • VRRP
  • VPN
  • GRE
  • IP-IP

Questão 128

Questão
With Fast-Failover disabled, to which IP address should the Aruba AP terminate its GRE tunnel for layer 2 controller redundancy to work and to support failover of access points?
Responda
  • VRRP IP address
  • management IP of an Aruba controller
  • management IP of the backup Aruba controller
  • HSRP IP address
  • Loopback IP address of backup Aruba controller

Questão 129

Questão
When an Aruba 6000 controller has two M3 modules installed, for which uses may the modules be used? (Choose two)
Responda
  • hot standby operations
  • VRRP backup
  • higher AP density per switch chassis
  • Active-Active masters
  • Active-Active master-backup

Questão 130

Questão
Referring to the diagram provided for this question, an employee brought an unauthorized AP from home and attached the LAN port to the cubicle Ethernet port. All Aruba APs and AMs as well as the employee AP are in VLAN 80 and within RF range of each other. No traffic from the wired or wireless network has passed through the unauthorized AP yet, but the AP began wireless broadcasts. How will the Aruba system initially classify the employee's non-Aruba AP?
Image:
98d63609-3d30-4a2c-89ab-af737bc6e0ea (image/jpg)
Responda
  • a valid AP
  • an AM
  • a Rogue AP
  • an interfering AP
  • a known interfering AP

Questão 131

Questão
Referring to the diagram provided for this question, an employee brought an unauthorized AP from home and attached it to the cubicle Ethernet port as shown in the diagram. The APs are in VLANs as shown in the diagram. Only AP1 is within RF range. How will the Aruba controller classify this AP?
Image:
0bd2a9b9-07be-442a-b1dd-f0d235020ccf (image/jpg)
Responda
  • an AP
  • an AM
  • a Rogue AP
  • an Interfering AP
  • a workstation

Questão 132

Questão
Referring to the diagram provided for this question, an employee brought an unauthorized AP from home, but did not attach it to the LAN infrastructure. The APs are in the VLANs as shown in the diagram. Only AP1 is within RF range of the employee AP. By default, how will the Aruba system classify the employee's AP?
Image:
5f615af0-ed74-4905-8431-4d1715e4e613 (image/jpg)
Responda
  • an AP
  • an AM
  • a Rogue AP
  • an Interfering AP
  • a valid workstation

Questão 133

Questão
What can an AM do that an AP cannot do?
Responda
  • Detect rogue APs
  • Detect an AP failure
  • Scans all channels in under 1 minute
  • Detect interfering APs
  • Scan all valid channels

Questão 134

Questão
(group8) #show ap active Active AP Table --------------- Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRP 11a Clients 11a Ch/EIRP/MaxEIRP ---- ----- ---------- --------- ------------------- ----------- ------------------- AP1 building1 10.1.80.150 0 AM 0 AM AP2 building1 10.1.80.151 0 AM 0 AM A user called technical support because they cannot see any of their APs in building one. You perform the "show" command as illustrated above. What can you conclude about these two APs from this output?
Responda
  • the GRE for the APs terminate on two different controllers: 10.1.80.150 and 10.1.80.151
  • the system will not function because there is no building1 group defined
  • the building1 APs will not accept any user connections
  • the user needs to configure his client to use the b/g band
  • the user needs to configure his client to use the a band

Questão 135

Questão
Exhibit: Based on the above screen capture for Interfering APs, what can you conclude?
Image:
85dad69e-3452-40eb-8fb3-7f0661b8d4cc (image/jpg)
Responda
  • The APs must be connected to the Aruba network.
  • The APs are classified as interfering because they are all transmitting on channel 6
  • There must not be any evidence that the APs are attached to the wired corporate network.
  • These APs are classified as interfering because they are not Aruba APs.
  • They are classified as interfering because they are running in g mode.

Questão 136

Questão
As illustrated in the above diagram and screen capture, a wireless hacker injects messages into your network to detach a client from your Aruba AP. What action should you take to identify and prevent the Intruder from connecting to your system? (Choose two)
Image:
12cef38e-10f9-4da7-b332-cc6d7f66b532 (image/jpg)
Responda
  • Enable Detect disconnect Station Attack
  • Enable Spoofed Deauth Blacklist
  • Take no action as there is no protection against this form of attack
  • Take no action as the Aruba system ignores this attack because it is against the client
  • Enable Detect EAP rate Anomaly

Questão 137

Questão
(group8) #show ap arm history ap-name AP1 Interface :wifi0 ARM History ----------- Time of Change Old Channel New Channel Old Power New Power Reason -------------- ----------- ----------- --------- --------- ------ 2010-10-28 07:58:53 157+ 149+ 21 21 I 2010-10-28 07:52:06 149+ 157+ 21 21 M 2010-10-28 07:16:59 157+ 149+ 21 21 I Interface :wifi1 ARM History ----------- Time of Change Old Channel New Channel Old Power New Power Reason -------------- ----------- ----------- --------- --------- ------ 2010-10-28 08:52:53 6 1 21 21 I Referring to the output above. What can you conclude about AP1?
Responda
  • This device is scanning channels.
  • This device is unstable because the channel assignment changed.
  • The device changed channels recently
  • The device changed channels and power levels recently.
  • The device is transmitting at maximum power levels.

Questão 138

Questão
Which of the following parameters can be specified in a rule for AP classification? (Choose three)
Responda
  • SSID of an AP
  • Number of clients connected to an AP.
  • SNR of an AP.
  • Operating mode of an AP
  • Discovering APs

Questão 139

Questão
Which of the following functions can be configured in the Controller WIP wizard? (Choose three)
Responda
  • Configure APs as Air Monitors
  • Configure rules for AP classification.
  • Configure preset levels for intrusion detection
  • Blacklisting Rules for clients
  • Identify encryption method used in your network.

Questão 140

Questão
A client device associates with an SSID provisioned with 802.1X authentication. The client is set for PEAP authentication. EAP termination (AAA Fastconnect) is disabled on the controller. But the client continuously cycles through the authentication process. Which of the following could cause this? (Choose two)
Responda
  • The client is provisioned with the wrong EAP type.
  • The client has an expired or revoked server certificate.
  • The DHCP server is not enabled
  • The VLAN is missing for the SSID.
  • The controller does not support PEAP in this mode.

Questão 141

Questão
A client device associates with an SSID provisioned with 802.1X authentication. The client is set for LEAP authentication. EAP termination (AAA Fastconnect) is enabled on the controller. But the client continuously cycles through the authentication process. Which of the following could cause this?
Responda
  • The Radius server is rejecting the client credentials.
  • The client has an expired or revoked server certificate.
  • The DHCP server is not enabled
  • The VLAN is missing for the SSID
  • The controller does not support LEAP in this mode.

Questão 142

Questão
A client attaches to a secure jack interface set to untrusted. But when the client tries to access the captive portal page, the following message appears, "Web Authentication is not enabled." What might be wrong?
Responda
  • The client has the browser provisioned with proxy settings.
  • The controller port needs to be set to trusted
  • A "aaa" profile needs to be selected on the Wired Access page
  • A Captive Portal profile needs to be assigned to the initial role.
  • Web Authentication cannot be used in this way.

Questão 143

Questão
Which command, when executed on a master controller, will show the APs connected to all controllers?
Responda
  • show stm connectivity
  • show ap active
  • show ap database
  • show ap bss-table
  • show ap controller-lms

Questão 144

Questão
Which of the following commands is most useful in showing the traffic of an individual user?
Responda
  • show datapath session table
  • show acl hits
  • show rights
  • show firewall
  • show traffic client

Questão 145

Questão
An Aruba based network has a Master and four local controllers deployed. But one of the locals, a new installation, is not seen by the Master. What might be wrong? (Choose two)
Responda
  • PAPI is not enabled on the local controller.
  • The master controller can only support three local controllers
  • IPSec is blocked by the internal network between the local and the master controllers.
  • The passphrase does not match on the master and local controllers.
  • GRE is blocked between the master and local controllers

Questão 146

Questão
An Aruba controller is configured with the correct IP address and gateway information and is connected to the corporate LAN via a core layer 2 switch. Control Plane Security is not enabled on the network. An access point is provisioned with AP name and group and connected to a different Layer 2 switch on the corporate LAN that has IP connectivity to the core layer 2 switch. The AP powers on and layer 2 connects to the network, but the wireless radios do not power on. Which could cause this condition? (Choose two)
Responda
  • the layer 2 switches have ACLs that block GRE traffic
  • the layer 2 switches are configured to block IPSec traffic
  • a DHCP server is not configured for the segment to which the AP is connected
  • the AP's mac address needs to be configured in the Aruba controller whitelist.
  • the AP and controller are in different subnets

Questão 147

Questão
In the diagram provided for this question, four buildings are identified on a college campus. Most of the wireless LAN traffic will be from students accessing the internet. According to Aruba best practices, which building is the best location to install the Aruba mobility controller?
Image:
1dd2e572-eb33-459a-b73a-b9d2fd379c2a (image/jpg)
Responda
  • data center
  • dormitory
  • server farm
  • library
  • 3rd party site

Questão 148

Questão
Referring to the diagram provided for this question, representing an office wireless LAN deployment, there will be approximately 250 users in the offices section of the building. All Switches are setup as L3 routers. According to Aruba best practice, which network device is the best choice for the wireless clients' default gateway?
Image:
e558b19b-0651-4fdd-967b-b20abdd053e9 (image/jpg)
Responda
  • device 'A'
  • device 'B'
  • device 'C'
  • device 'D'
  • device 'C or D'

Questão 149

Questão
One hundred (100) additional APs were deployed in an existing network. But some APs are not able to connect to the lms-ip address, even though all of the APs belong to the same AP group. Which of the following are NOT potential causes? (Choose two)X
Responda
  • The problem APs are not getting an IP address.
  • The problem APs have the wrong lms-ip address setting
  • There is a firewall between the problem APs and the controller blocking PAPI.
  • The controller does not support that many APs in a single AP-Group.
  • There are not enough AP licenses to support the additional quantity of APs.

Questão 150

Questão
IEEE 802.11r provides support for which of the following:
Responda
  • radio measurements within a WLAN
  • radio measurement within an ESS
  • fast roaming within an ESS
  • fast roaming within a BSS
  • roaming across controllers

Questão 151

Questão
If a Remote AP (RAP) is attempting to contact a controller that is behind a NAT device what protocol must be allowed through the NAT/Firewall?
Responda
  • PAPI
  • NATT
  • IPSec
  • SSH
  • GRE

Questão 152

Questão
Which of the following are NOT valid RAP forwarding modes? (Choose two)
Responda
  • Tunnel
  • Bridge
  • Split-Tunnel
  • Backup
  • Standard

Questão 153

Questão
Which of the following are valid RAP operating modes?
Responda
  • Always, Backup, Standard, Persistent
  • Always, Backup, Tunnel, Persistent
  • Always, Hotel-Connect, Tunnel, Standard
  • Backup, Hotel-Connect, Standard, Persistent
  • Backup, Normal, Tunnel, Always

Questão 154

Questão
When configuring split tunnel mode on a Remote AP (RAP) where is the routing function for the split tunnel defined?
Responda
  • On the IP routing tab in the configuration screen
  • On the AP provisioning screen.
  • In the RAP static routing tables
  • In the Firewall policy
  • In the RAP whitelist

Questão 155

Questão
When does a RAP's backup SSID begin broadcasting?
Responda
  • When the GRE tunnel to the controller is established
  • When the IPSec tunnel to the controller is established.
  • When the controller cannot be reached with PAPI
  • When bridging is required for guest users
  • When the controller cannot be reached with SSL

Questão 156

Questão
A Remote AP provisioned in "Split-Tunnel" Forwarding mode has which characteristic?
Responda
  • Local traffic first goes to the controller and is then spilt back to the local network.
  • Traffic is IPSec encrypted before it is sent to the controller.
  • The user role must have a "Permit" statement in order to locally bridge the traffic.
  • The user role must have a "route dst-nat" statement to locally bridge the traffic.
  • The RAP uses PAPI to send data traffic to the controller

Questão 157

Questão
A Remote AP was properly functioning before losing it's internet connection and now cannot communicate with the controller. What SSID is the AP broadcasting?
Responda
  • The SSID in Operational mode Always and Forwarding mode Backup
  • The SSID in Operational mode Split Tunnel and Forwarding mode Bridge
  • The SSID in Operational mode Always and Forwarding mode Tunnel
  • The SSID in Operational mode Standard and Forwarding mode Tunnel
  • The SSID in Operational mode Persistent and Forwarding mode Bridge

Questão 158

Questão
A Remote AP provisioned with an SSID in "Bridged" forwarding mode has which one of the following characteristics?
Responda
  • The client obtains its IP address from the controller.
  • The client's default gateway must be the controller.
  • The client traffic is forwarded through a GRE tunnel to the controller.
  • The client's default gateway may be the Access Point or a local gateway
  • The client's authentication must be 802.1X.

Questão 159

Questão
An AP 105 was converted into a RAP. The RAP can authenticate its IPSec tunnel to a controller using which of the following methods? (Choose two)
Responda
  • 802.1X/EAP authentication
  • Captive Portal authentication
  • IP address authentication
  • Username/Password authentication
  • Certificate/MAC address authentication

Questão 160

Questão
Which of the following describes a Remote AP provisioned in "Split-Tunnel" Forwarding mode?
Responda
  • Local user traffic first goes to the controller and is then spilt back to the local network.
  • All data and control traffic goes to the controller unsecured.
  • The user role must have a "Permit" statement in order to locally bridge the traffic.
  • The user role must have a "route src-nat" statement to locally bridge the traffic.
  • The RAP uses PAPI to send data traffic to the controller.

Questão 161

Questão
A Remote AP provisioned in "Split-Tunnel" Forwarding mode has which of the following characteristics?
Responda
  • Local traffic first goes to the controller and is then spilt back to the local network.
  • User Traffic is CPSec encrypted before it is sent to the controller.
  • The user role must have a "Permit" statement in order to locally bridge the traffic
  • The user role must have a "permit dst-nat" statement to locally bridge the traffic.
  • The RAP uses UDP 4500 to send traffic to the controller.

Questão 162

Questão
What is the purpose of Mesh Clusters?
Responda
  • To separate Mesh points from Mesh Portals.
  • To ensure that mesh APs with the same VAPs are not in the same cluster
  • To define a group of mesh APs that create mesh links with each other.
  • To cluster mesh APs of the same model together.
  • To enable mesh APs to join the nearest mesh portal cluster.

Questão 163

Questão
A company purchased an indoor mesh deployment using the 620 controller and the AP 105 models, where 5 APs will be deployed on a floor to provide wireless internet access for users. Users may open VPN tunnels using software clients over the wireless network to a 3rd party VPN concentrator overseas. The company wants to limit wireless user access to TCP traffic locally and VPN traffic overseas. In addition to the base AOS, which licenses will be necessary for this deployment?
Responda
  • VPN, PEF-NG
  • AP Capacity, PEF-NG
  • AP Capacity, PEF-NG, VPN
  • AP Capacity
  • PEF-NG, PEF-V

Questão 164

Questão
When deploying Remote Mesh Portals, what is one of the purposes of the Mesh Private VLAN?
Responda
  • To separate wireless user traffic coming from mesh networks from non-mesh networks
  • To tag mesh wireless user traffic on a particular AP
  • To allow Mesh Points to form private vlan networks with certain users
  • To tag control plane traffic from Mesh points to the controller
  • To tag clients high priority traffic

Questão 165

Questão
How does an Aruba infrastructure calculate a wireless device's location?
Responda
  • GPS
  • RF Fingerprinting
  • RSSI triangulation
  • TDOA
  • LBS

Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.

Semelhante

FUNÇÕES DA CRIMINOLOGIA.
fcmc2
AFO - Administração Financeira Orçamentária
fe.r.m
Orações Subordinadas
vini_camargo0
Reação Química: Fotossíntese
carolinalima1530
Estrutura das palavras e Processo de formação das palavras
Juliane Antoniel
Sistema Endócrino
Gabriel Paes
Os três pilares de uma gestão eficaz
Liliane Tubino
Funções Trigonométricas
nathielecosta
Grandes Navegações e Período Pré-Colonial (1490 - 1540)
Isadora Borges
PORÍFEROS
Taína Garcia Moreno Tomazella
Contextualização da Aula 3 - Tecnologia na Formação Profissional - SAÚDE
Fabrícia Assunção
Explore a Biblioteca