2570273
Descrição
Quiz por Del Sutton, atualizado more than 1 year ago
|
Criado por Del Sutton
mais de 9 anos atrás
|
|
Questão 1
Questão
Access Control Lists:
Responda
-
Filter network traffic by controlling weather routed packets are forwarded or blocked at the router's interfaces.
-
determine the upper layer protocol access rights only.
-
Permit the router examines each packet to determine whether to forward or drop the packet, based on the what you specified within the access lists.
-
Criteria could be the source address of the traffic, the destination address of the traffic, the upper-layer protocol or the information
Questão 2
Questão
You Can control access to the router using the following methods
Responda
-
Console Access
-
Telnet/SSH Access
-
SNMP Access
-
Controlling Access to the Network Servers That Contain Configuration Files
Questão 3
Questão
Masquerading (NAPT) is not used very much in residential application as such applications tend to use Dynamic NAT
Responda
- True
- False
Questão 4
Questão
Match the Well-Known IP Protocol Port Numbers
Responda
-
FTP Data : 20
-
FTP program : 21
-
DNS : 53
-
SMTP : 25
-
Telnet : 23
-
TFTP : 69
Questão 5
Questão
IP Extended Access Lists are always configured with an ACL protocol number between 1-99
Responda
- True
- False
Questão 6
Questão
Why You Should Configure Access Lists
Responda
-
To restrict use access to the "show running-config" command
-
To restrict contents of routing updates
-
To provide traffic flow control
-
To provide security for your network
Questão 7
Questão
The command: ip nat inside source list 10 interface serial0/0 overload means:
Responda
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated. The overload command overrides any instances of overloading.
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated until the overload command is issued by the administrator,
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated until the point where the system becomes overloaded.
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated. The overload keyword specifies that these multiple internal LAN addresses can be Network Address Translated to that single instance.
Questão 8
Questão
An ACL in Cisco IOS parlance is an Accounting Control Link (ACL)
Responda
- True
- False
Questão 9
Questão
access-class access-list number (in|out)
Responda
-
access-class assigns access lists to a Cisco interface
-
access-class assigns access lists to a particular Cisco line like VTY terminals.
-
access-class assigns access lists to a particular Cisco VLAN tag
-
access-class assigns access lists to a particular Cisco Access interface.
Questão 10
Questão
______________________ address translation is necessary when the number of IP's to translate does not equal the number of IP's to translate to, or they are equal but for some reason it is not desirable to have a static Mapping ....(not multiple choice in exam)
Responda
-
Static
-
Dynamic
-
Variable
-
Floppy
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.