2697907
Questão 1
Questão
This tool is used to create a score line in the glass, so the glass will break along that line.
Responda
-
Glass Runner
-
Glass cutter
-
Glass Knife
Questão 2
Questão
When scoring the glass, I should start and stop my cutter a lot, and I can start my cut in the center of the glass.
Responda
- True
- False
Questão 3
Questão
This type of pliers are good for what?
Responda
-
To break small pieces of glass for Mosaic
-
To break curved or small pieces of glass from a scored line on glass
-
To hold stained glass pieces while soldering to keep hands from burning
Questão 4
Responda
-
Grozing pliers
-
Wheeled Nippers
-
Running Pliers
Questão 5
Questão
True or false? This tool is very inexpensive, and should be thrown in the bin, or not turned back in at all.
Responda
- True
- False
Questão 6
Responda
-
Solder Iron Stand
-
Flux Stand
-
Patina stand
Questão 7
Questão
When do you apply this to your tiffany stained glass?
Responda
-
This is patina, you apply it when you are soldering your pieces together
-
This is patina, you apply it as the absolutely last step in your process
-
This is patina, you choose either copper or black, and apply to the solder lines after you wash off the flux from soldering.
Questão 8
Questão
Glass cutting oil is very important to have on your glass cutter because...
Responda
-
the wheels in the glass cutters need oil to keep glass clear from the axel and lubricate so they roll smooth
-
the oil creates a line for the glass to break
-
the teacher tells me to do it, but I have no idea why
Questão 9
Questão
How do you apply this to your glass?
Responda
-
Spray on your glass, and let set for 5-10 minutes before wiping off
-
Drip on seams, and scrub with patina buddy
-
Take a few drops and buff glass and seams, then use clean clothes to continue buffing until shiny
Questão 10
Questão
What do you see in this picture?
Responda
-
Foil Wrap
-
Copper wire
-
Cooper paper
-
Copper foil
Questão 11
Questão
These are not scissors...what is it?
Responda
-
Pattern cutter
-
Foil pattern sheer
-
Three blade scissors
Questão 12
Questão
I'm ready to copy my pattern, what do I do?
Responda
-
Make a copy with a copy machine and cut out the pieces with scissors
-
Make a copy with carbon paper, tape down the original, trace with black pen and cut one out pieces with scissors
-
Tape down a new paper, tape down the carbon paper black side down, tape down original copy, and trace with colored pencil, and cut out copy with pattern sheers
Questão 13
Responda
-
This is flux, used to cool the iron when soldering glass together
-
This is flux, it is used to clean the surfaces of the copper so the solder can fuse with the foil
-
This is flux, it is used for creating a black line along the solder line
Questão 14
Responda
-
A one hundred and ten watt soldering iron
-
An eighty watt soldering iron
Questão 15
Responda
-
Black Patina
-
Black granite
-
Black grout
-
Chocolate
Questão 16
Responda
-
Fib
-
Fid
-
Foiler
-
Copper foil
Questão 17
Questão
What tool would I use when I'm braking off a long straight score on a piece of glass?
Responda
-
Grozing Pliers
-
Running Pliers
-
Wheeled Nippers
-
Glass Cutter
Questão 18
Questão
Why is it important that you burnish the copper foil until smooth?
Responda
-
To make the solder shiny
-
Because you have to activate the glue on the tape, and that's the only way it will stick
-
So the flux and other liquid can not get under the copper foil and weaken the solder line
-
Because Mrs. Ross said to
Questão 19
Questão
When choosing to cut my patterns on a piece of glass, I will always plan my designs on my glass, so I am able to cut the smoother side.
Responda
- True
- False
Questão 20
Questão
When I am finished with my grout mixture, I should rinse the rest of it down the drain.
Responda
- True
- False
Questão 21
Questão
Chose the correct order of operations.
Responda
-
Copy pattern, cut pattern with foil sheers, cut glass patterns, grind pieces to fit, wash pieces, copper foil and burnish smooth, tack and solder seams, wash clean, patina finish, buff shiny with finishing compound
-
Copy pattern, tack and solder seams, cut pattern with foil sheers, wash clean, cut glass patterns,copper foil and burnish smooth, grind pieces to fit, wash pieces, patina finish, buff shiny with finishing compound
-
Tack and solder seams, copper foil and burnish smooth, cut pattern with foil sheers, wash pieces, copy pattern, wash clean, patina finish, cut glass patterns, grind pieces to fit, buff shiny with finishing compound
Questão 22
Questão
One way to put emphasis on a detail in your mosaic is to make all the glass the same exact size.
Responda
- True
- False
Questão 23
Questão
If I want to emphasize the water in my mosaic I could... (check all that might apply)
Responda
-
Cut solid blue glass in the a uniform shape
-
Cut blue glass glass in a wavy shape for texture
-
Use multiple colors of blue to show movement
-
Place one piece of a solid blue glass where the water is
Questão 24
Questão
Which options do we have for a patina finish? Choose all that apply.
Responda
-
White Patina
-
Black patina
-
Gold Patina
-
Blue Patina
-
No patina-Silver solder finish
-
Silver Patina
-
Solder Patina
-
Copper Patina
Questão 25
Questão
What does 60/40 Solder mean?
Responda
-
60/40 solder is the cost of solder
-
It's 60% tin and 40% lead.
-
60% lead, 40% tin
-
60% Copper, 40% lead
Questão 26
Questão
Did you fill out the course evaluation?
Responda
-
Yes
-
No
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.