Copiar e Editar

Simulacro 2: Certificacion LPI - 102

Descrição

Quiz sobre Simulacro 2: Certificacion LPI - 102, criado por Carlos Alberto Jara Alva em 26-07-2022.
Carlos Alberto Jara Alva
Quiz por Carlos Alberto Jara Alva, atualizado more than 1 year ago
Carlos Alberto Jara Alva
Criado por Carlos Alberto Jara Alva mais de 2 anos atrás
170
0
0

Resumo de Recurso

Questão 1

Questão
What kind of hardware is represented by the device name /dev/hda?
Responda
  • IDE Hard Drive
  • SCSI Hard Drive
  • SATA Hard Drive
  • Sound Card

Questão 2

Questão
What file should you query to determine whether there is an IRQ conflict on your system?
Responda
  • /proc/interrupts
  • /proc/cpuinfo
  • /proc/meminfo
  • /proc/irqstatus

Questão 3

Questão
Which of the following are arguments you can pass to the kernel at boot time to tell it to start in runlevel 1 (single-user mode)? (Select two)
Responda
  • 1
  • single
  • user
  • one

Questão 4

Questão
Which process is referred to as the “mother of all processes” and always has PID 1?
Responda
  • init
  • mother
  • admin
  • administrator

Questão 5

Questão
What is the command to delete the default gateway from the system IP routing table? (Choose TWO correct answers.)
Responda
  • oute del default
  • fconfig unset default
  • netstat -r default
  • ip route del default
  • sysctl ipv4.default_gw=0

Questão 6

Questão
What is true regarding a default route?
Responda
  • The default route is always used first. When the default route is not available more specific routes are tried.
  • When a default route is set, all other routes are disabled until the default route is deleted.
  • The default route is only used if there is not a more specific route to a destination host or network.
  • Without a default route, no network communication even in directly attached networks is possible.

Questão 7

Questão
What is true regarding TCP port 23?
Responda
  • Port 23 is the well known port for the telnet service which is a plain text protocol that should no longer be used.
  • Port 23 is the well known port for the SSH service which provides secure logins.
  • Port 23 is the well known port for the rlogin service which is SSL secured by default.
  • Port 23 is the well known port for the system login services which are encrypted when the user runs the starttls command in his login shell.

Questão 8

Questão
Which of the following IPv4 networks are reserved by IANA for private address assignment and private routing? (Choose THREE correct answers.)
Responda
  • 127.0.0.0/8
  • 10.0.0.0/8
  • 169.255.0.0/16
  • 172.16.0.0/12
  • 192.168.0.0/16

Questão 9

Questão
Which of the following lines are valid in the file /etc/hosts? (Choose TWO correct answers.)
Responda
  • 2001:db8::15 www.example.com www
  • www.example.com www 203.0.13.15
  • 203.0.113.15 www.example.com www
  • www.example.com,www 203.0.13.15,2001:db8::15
  • 003.0.113.15,2001:db8::15 www.example.com www

Questão 10

Questão
Which of the following keywords can be used in the file /etc/nsswitch.conf to specify a source for host name lookups? (Choose TWO correct answers.)
Responda
  • resolv
  • dns
  • remote
  • files
  • hosts

Questão 11

Questão
Which of the following may occur as a consequence of using the command ifconfig? (Choose THREE correct answers.)
Responda
  • New name servers may be added to the resolver configuration.
  • Network interfaces may become active or inactive.
  • The routing table may change.
  • IP addresses may change.
  • The system's host name may change.

Questão 12

Questão
What is the purpose of the nsswitch.conf file?
Responda
  • It is used to configure where the C library looks for system information such as host names and user passwords.
  • It is used to configure network protocol port numbers such as for HTTP or SMTP.
  • It is used to configure LDAP authentication services for the local system.
  • It is used to configure which network services will be turned on during the next system boot.

Questão 13

Questão
Which of the following commands preloads and manages keys that are used for automatic authentication while logging in to other machines using SSH?
Responda
  • sshd
  • ssh-agent
  • ssh-keygen
  • ssh-add

Questão 14

Questão
When trying to unmount a device it is reported as being busy. Which of the following commands could be used to determine which process is causing this?
Responda
  • debug
  • lsof
  • nessus
  • strace
  • traceroute

Questão 15

Questão
With X11 forwarding in ssh, what environment variable is automatically set in the remote host shell that is not set when X11 forwarding is not enabled? (Specify only the environment variable without any additional commands or values.) [blank_start]DISPLAY, $DISPLAY[blank_end]
Responda
  • DISPLAY, $DISPLAY

Questão 16

Questão
Which of the following programs uses the hosts.allow file to perform its main task of checking for access control restrictions to system services?
Responda
  • tcpd
  • inetd
  • fingerd
  • mountd
  • xinetd

Questão 17

Questão
What is a purpose of an SSH host key?
Responda
  • It must be sent by any SSH client in addition to a user key in order to identify the client's host.
  • It provides the server's identity information to connecting SSH clients.
  • It is the root key by which all user SSH keys must be signed.
  • It authenticates any user that logs into a remote machine from the key's host.
  • It is used by system services like cron, syslog or a backup job to automatically connect to remote hosts.

Questão 18

Questão
Which of the following find commands will print out a list of files owned by root and with the SUID bit set in /usr?
Responda
  • find /usr -uid 0 -perm +4000
  • find -user root +mode +s /usr
  • find -type suid -username root -d /usr
  • find /usr -ls \*s\* -u root
  • find /usr -suid -perm +4000

Questão 19

Questão
Which command is used to set restrictions on the size of a core file that is created for a user when a program crashes?
Responda
  • core
  • dquota
  • ulimit
  • quota

Questão 20

Questão
Which configuration file would be edited to change default options for the OpenSSH server?
Responda
  • /etc/ssh/sshd_config
  • /etc/ssh/ssh
  • /etc/ssh/server
  • /etc/ssh/ssh_config
  • /etc/ssh/ssh_server

Questão 21

Questão
Which of the following commands can be used to limit the amount of memory a user may use?
Responda
  • umask
  • usermod
  • ulimit
  • passwd
  • chage

Questão 22

Questão
What environment variable holds the list of all directories that are searched by the shell when you type a command name?
Responda
  • $LIST
  • $VIEW
  • $PATH
  • $ENV
  • None of the above

Questão 23

Questão
In the bash shell, entering the !! command has the same effect as which one of the following (assuming bash is in emacs mode)?
Responda
  • Ctrl-P and Enter
  • Ctrl-N and Enter
  • Ctrl-U and Enter
  • !-2
  • !2

Questão 24

Questão
Name the command that displays pages from the online user’s manual and command reference. [blank_start]man[blank_end]
Responda
  • man

Questão 25

Questão
Which of the following commands displays the comments from a bash script? Select all that apply.
Responda
  • find “^#” /etc/rc.d/rc.local
  • sed ‘/^#/ !d’ /etc/init.d/httpd
  • grep ^# /etc/init.d/httpd
  • grep ^# /etc/passwd
  • locate “^#” /etc/skel/.bashrc

Questão 26

Questão
Which one of the following answers creates an environment variable VAR1, present in the environment of a bash child process?
Responda
  • VAR1="fail" ; export VAR1
  • VAR1="fail" \ export VAR1
  • VAR1="fail"
  • set VAR1="fail" ; enable VAR1
  • export VAR1 \ VAR1="fail"

Questão 27

Questão
What SQL command is used to modify data present in a table?
Responda
  • INSERT
  • WHERE
  • UPDATE
  • OVERWRITE
  • JOIN

Questão 28

Questão
What output will the following command generate: seq -s";" -w 1 10
Responda
  • 01;02;03;04;05;06;07;08;09;10
  • 1;2;3;4;5;6;7;8;9;10
  • 1;10
  • 01;02;03;04;05;06;07;08;09;010
  • None of the above

Questão 29

Questão
Adam wants to protect himself from inadvertently overwriting files when copy- ing them, so he wants to alias cp to prevent overwrite. How should he go about this? Select one.
Responda
  • Put alias cp='cp -i' in ~/.bashrc
  • Put alias cp='cp -i' in ~/.bash_profile
  • Put alias cp='cp -p' in ~/.bashrc
  • Put alias cp='cp -p' in ~/.bash_profile
  • Put alias cp = 'cp -I' in ~/.bashrc

Questão 30

Questão
Consider the following script, stored in a file with proper modes for execution: #!/bin/bash for $v1 in a1 a2 do echo $v1 done Which one of the following best represents the output produced on a terminal by this script?
Responda
  • in a1 a2
  • a1 a2
  • $v1 $v1 $v1
  • No output is produced, but the script executes correctly.
  • No output is produced, because the script has an error.

Questão 31

Questão
Monica consults the /etc/passwd file expecting to find encrypted passwords for all of the users on her system. She sees the following: jdoe:x:500:500::/home/jdoe:/bin/bash bsmith:x:501:501::/home/bsmith:/bin/tcsh Which of the following is true? Select one.
Responda
  • Accounts jdoe and bsmith have no passwords.
  • Accounts jdoe and bsmith are disabled.
  • The passwords are in /etc/passwd-.
  • The passwords are in /etc/shadow.
  • The passwords are in /etc/shadow-.

Questão 32

Questão
What is the main configuration file for X Windows?
Responda
  • /etc/xorg.conf
  • /etc/x11.conf
  • /etc/X11/x11.conf
  • /etc/X11/xorg.conf
  • None of the above

Questão 33

Questão
What file in the user’s home directory will an X Windows application look to for configuration settings such as color and video mode?
Responda
  • ~/.xinitrc
  • ~/.xconfig
  • ~/.Xresources
  • ~/.xorg.conf
  • ~/.bashrc

Questão 34

Questão
What is the protocol XDMCP used for?
Responda
  • Remote logging of X Windows events.
  • Remote control of a running X Windows display.
  • Graphical login support for the local host.
  • Graphical login support for remote hosts on the network.
  • None of the above.

Questão 35

Questão
Which of the following are not commonly used display managers for X Windows? Choose two.
Responda
  • xdm
  • gdm
  • kdm
  • xfce
  • X11

Questão 36

Questão
Emacspeak is:
Responda
  • A popular text editor for Linux.
  • A window manager.
  • An assistive technology that handles screen reading for a number of console applications.
  • An assistive technology that provides a user with an on-screen keyboard.
  • None of the above.

Questão 37

Questão
Which one of the following outcomes results from the following command? # chmod g+s /home/software
Responda
  • The SUID bit will be set for /home/software.
  • The SGID bit will be set for /home/software, preventing access by those not a member of the software group.
  • The SGID bit will be set for /home/software, to keep group membership of the directory consistent for all files created.
  • The sticky bit will be set for /home/software.
  • The sticky bit will be applied to all files in /home/software.

Questão 38

Questão
Which one of these files determines how messages are stored using syslogd?
Responda
  • /etc/sysconfig/logger.conf
  • /etc/syslog.conf
  • /etc/syslogd.conf
  • /etc/conf.syslog
  • /etc/conf.syslogd

Questão 39

Questão
Where are mail logs usually stored in a standard syslog setup?
Responda
  • /var/log/messages
  • /var/log/secure
  • /var/log/dmesg
  • /var/log/maillog
  • /var/maillog

Questão 40

Questão
How many hosts can exist on a subnet with mask 255.255.255.128? Select one.
Responda
  • 512
  • 256
  • 128
  • 127
  • 126

Questão 41

Questão
For an Internet workstation with a single network interface, what routes must be added to interface eth0 after it is initialized? Select one.
Responda
  • None
  • Interface
  • Interface and default gateway
  • Interface, local network, and default gateway

Questão 42

Questão
On a Linux server, what service is most likely “listening” on port 25? Select one.
Responda
  • Apache
  • SSHd
  • Postfix
  • Samba
  • v

Questão 43

Questão
Which one of these protocols is a Layer 4 connection-oriented protocol? Select one.
Responda
  • TCP
  • IP
  • UDP
  • ICMP

Questão 44

Questão
Which command will display information about Ethernet interface eth0? Select one.
Responda
  • cat /proc/eth/0
  • ifconfig eth0
  • ipconfig eth0
  • ipconfig /dev/eth0
  • cat /etc/eth0.conf

Questão 45

Questão
What does the printcap entry sd indicate? Select one.
Responda
  • The system default printer
  • A printer’s spool directory
  • A device file for the printer
  • A location where errors are stored
  • The printer driver

Questão 46

Questão
Which of the following is a valid entry in /etc/fstab for a remote NFS mount from server fs1? Select one.
Responda
  • fs1:/proc /mnt/fs1 nfs defaults 9 9
  • /mnt/fs1 fs1:/proc nfs defaults 0 0
  • fs1:/home /mnt/fs1 nfs defaults 0 0
  • /mnt/fs1 fs1:/home nfs defaults 0 0
  • /home:fs1 /mnt/fs1 nfs defaults 0 0

Questão 47

Questão
Which network protocol is used by SSH and FTP? Select one.
Responda
  • ICMP
  • UDP
  • TCP
  • DHCP
  • PPP

Questão 48

Questão
Which of the following programs will display DNS information for a host? Choose all that apply.
Responda
  • host
  • nslookup
  • nsstat
  • dig
  • ping

Questão 49

Questão
Which of the following statements regarding the ICMP protocol is not true? Select one.
Responda
  • ICMP is connectionless.
  • ICMP provides network flow control.
  • ICMP is also known as UDP.
  • ICMP is used by ping.

Questão 50

Questão
What server daemon resolves domain names to IP addresses for requesting hosts? [blank_start]named[blank_end]
Responda
  • named

Questão 51

Questão
What function does a print filter serve? Select one.
Responda
  • It collates output from multiple users.
  • It translates various data formats into a page description language.
  • It rejects print requests from unauthorized users.
  • It rejects print requests from unauthorized hosts.
  • It analyzes print data and directs print requests to the appropriate lpd.

Questão 52

Questão
Consider the following excerpt from the file /etc/resolv.conf on a Linux workstation: nameserver 127.0.0.1 nameserver 192.168.1.5 nameserver 192.168.250.2 What can be said about this configuration? Select one.
Responda
  • Two DNS servers on the public network are being used for resolution.
  • One DNS server on the local network is being used for resolution.
  • The configuration contains errors that will prevent the resolver from functioning.
  • A caching-only nameserver is the first nameserver queried.
  • The resolver library will consult nameserver 192.168.250.2 first.

Questão 53

Questão
Name the file that contains simple mappings between IP addresses and system names. [blank_start]/etc/hosts[blank_end]
Responda
  • /etc/hosts

Questão 54

Questão
What program can be used to interactively change the behavior of a print queue? Select one.
Responda
  • lpd
  • lpr
  • lpq
  • lprm
  • lpc

Questão 55

Questão
What program will display a list of each hop across the network to a specified destination? Select one.
Responda
  • tracert
  • rttrace
  • traceroute
  • routetrace
  • init

Questão 56

Questão
What is the system-wide bash configuration file called? Include the entire path. [blank_start]/etc/profile[blank_end]
Responda
  • /etc/profile

Questão 57

Questão
Consider the following line from /etc/passwd: adamh:x:500:1000:Adam Haeder:/home/adamh:/bin/bash What does the number 1000 mean?
Responda
  • User adamh has a UID of 1000.
  • The primary group that adamh belongs to is group 1000.
  • User adamh was the 1000th user created on this system
  • The password for adamh expires in 1000 days.
  • The secondary group that adamh belongs to is group 1000.

Questão 58

Questão
Consider the following trivial script called myscript: #!/bin/bash echo "Hello" echo $myvar Also consider this command sequence and result: # set myvar='World' # ./myscript Hello The script ran without error but didn’t echo World. Why not? Select one.
Responda
  • The syntax of the set command is incorrect.
  • The script executes in a new shell, and myvar wasn’t exported.
  • The #!/bin/bash syntax is incorrect.
  • The $myvar syntax is incorrect.
  • The script is sourced by the current shell, and myvar is available only to new shells.

Questão 59

Questão
How does a process indicate to the controlling shell that it has exited with an error condition? Select one.
Responda
  • It prints an error message to stderr.
  • It prints an error message to stdout.
  • It sets an exit code with a zero value.
  • It sets an exit code with a nonzero value.
  • It causes a segmentation fault.

Questão 60

Questão
How can a nonprivileged user configure sendmail to forward mail to another account? Select one.
Responda
  • She can add a new entry in /etc/aliases.
  • She can create a .forward file containing the new address.
  • She can create an .alias file containing the new address.
  • She can create a sendmail.cf file containing the new address.
  • She cannot forward mail without assistance from the administrator.

Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.

Semelhante

BrainStorm
Alessandra S.
Guia de Estudos para OAB 1a Fase
Alessandra S.
Exame Nacional de Português 2
Sandra Franco
Literatura
neusamiotto
Coesão e Coerência
alessandra
Calorimetria
GoConqr suporte .
QUIZ DE CIÊNCIAS - FÍSICA
Clean Maria Reis
Egito Antigo
Júlia Flores
REDAÇÃO
Kamila Vieira
Contextualização Aula 01 - Desenvolvimento e Sustentabilidade Ambiental - Medicina
Jéssica Meireles
Mapa Mental - Exame de Certificação CTFL-AT
Larissa Trindade
Explore a Biblioteca