3881323
Questão 1
Questão
Which LSA sends out information about known networks in an area?
Responda
-
Type 1 Router LSA
-
Type 2 Network LSA
-
Type 3 Summary LSA
-
Type 4 ASBR Summary LSA
-
Type 5 Autonomous system external LSA
-
Type 7 NSSA LSA
Questão 2
Questão
What option matches the type 2 LSA?
Responda
-
The type 2 LSA is used for DR/BDR to let them know which routers belong to the multi-access network.
-
The type 2 LSA is used to propagate the "tree" for each router in an area.
-
The type 2 LSA is only used in PPP-network types when DR and BDR is not used.
-
The type 2 LSA is used by the DR/BDR to tell the other routers in a segment which prefix they belong to and who the DR/BDR are.
Questão 3
Questão
What characteristics corresponds with the type 3 LSA?
Responda
-
Type 3 LSA is only propagated inside an area.
-
Type 3 LSA's are created from internal routers.
-
Type 3 LSA's needs an ASBR.
-
Type 3 LSA's needs an ABR.
-
Type 3 LSA's is only propagated between areas.
Questão 4
Questão
The type 4 LSA contains information about?
Responda
-
The router ID of the DR.
-
How to reach the ABR.
-
How to reach a specific area.
-
How to reach the ASBR.
Questão 5
Questão
What routes-type sends out type 5 LSA for what purpose?
Responda
-
ASBR sends out type 5 LSA to let other areas know how to reach it.
-
ASBR sends out type 5 LSA with summary information between areas.
-
ABR sends out type 5 LSA with external summary information between areas.
-
DR sends out type 5 LSA to propagate the multi-access segment with prefixes to other networks.
-
ASBR sends out type 5 LSA with summary information to other networks outside the OSPF-domain.
Questão 6
Questão
What is the purpose of the type 7 LSA?
Responda
-
The type 7 LSA is used to propagate redistributed networks into Not-so-stubby-areas.
-
The type 7 LSA is used instead of type 3 LSA's that are blocked in totally stubby areas.
-
The type 7 LSA is exactly the same as the type 5 LSA.
-
The type 7 LSA carries information about external networks.
Questão 7
Questão
Stub areas allow type 5 LSA's.
Responda
- True
- False
Questão 8
Questão
Stub areas allow type 3 LSA.
Responda
- True
- False
Questão 9
Questão
The AS summary LSA is created by the?
Responda
-
DR
-
ABR
-
ASBR
-
Backbone Router
Questão 10
Questão
What is the type 8 LSA called?
Responda
-
Link LSA
-
Intra-area prefix LSA
-
Inter-area prefix LSA
-
Link-local LSA
Questão 11
Questão
The type 9 LSA is used for what?
Responda
-
The intra-area prefix LSA is the same as the type 1 and 2 LSA in OSPFv2.
-
The inter-area prefix LSA is the same as the type 1 and 2 LSA in OSPFv2.
-
The intra-area prefix is used to summarize networks between areas.
-
The inter-area prefix is used to summarize networks between areas.
Questão 12
Questão
Which LSA types are renamed in OSPFv3?
Responda
-
Router LSA
-
Summary LSA
-
Network LSA
-
ASBR summary LSA
-
AS LSA
-
Type 7 LSA
Questão 13
Questão
OSPFv3 supports only IPv4
Responda
- True
- False
Questão 14
Questão
OSPF supports what types of authentication?
Responda
-
MD5
-
Plain text
-
SHA
-
Timed based MD5
-
Shared secret
Questão 15
Questão
Virtual link can be configured over stub areas.
Responda
- True
- False
Questão 16
Questão
To configure route summarization in OSPF, which command is used?
Responda
-
Area range
-
Summary-address
-
default-information originate
-
Auto-summary enable
Questão 17
Questão
How do you inject a default-route into OSPF?
Responda
-
Use the default-route command in router-configuration mode.
-
Create a static default-route and use the redistribute command.
-
Use the default-information originate command.
-
Use the default-information originate always command.
Questão 18
Questão
Where is priority used in OSPF?
Responda
-
In the election of master and slave when database description packets are exchanged.
-
The calculation of shortest path.
-
The election of DR and BDR
-
In the creation of stub areas where priority 0 is used to flag an area as stub.
Questão 19
Questão
What is a Database descriptor packet?
Responda
-
A database descriptor packet is another name for hello-packets which keeps the databases synchronized across all routers in an area.
-
It's used to compare the LSDB between routers in an area to see if more link-state Query packets need to be sent.
-
It describes the database of the router, what RID, prefix and if it's a DR or BDR.
-
it compares the LSDB of the routers participating in order to see what is missing in each database to get a fully synchronized topology of the area.
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.