4394252
Descrição
Quiz por TRAVIS CANNING, atualizado more than 1 year ago
|
Criado por TRAVIS CANNING
mais de 8 anos atrás
|
|
Questão 1
Questão
Thermo Loads are
Responda
-
Loads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
-
loads are transient and, when the occur, can result In the production of vibratory forces
-
The design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
-
Pressure vessels located outdoors have additional stresses imposed by wind.
Questão 2
Questão
The ______ code uses area replacement as the basis for reinforcement calculations
Responda
-
csa b51
-
csa b52
-
asme
-
wleders
Questão 3
Questão
Design pressure is
Responda
-
a higher pressure than the operating pressure and is used to determine the minimum required thickness for the pressure vessel
-
the minimum required pressure
-
equal to the operating pressure
-
1.5 times the maximum working pressure
Questão 4
Questão
Attachment loads are
Responda
-
Loads caused by piping and equipment attached to the pressure vessel and transferred to the vessel by nozzles
-
loads are transient, and when they occur can result in the production of vibratory forces
-
the design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
-
pressure vessels located outdoors have additional stresses imposed by wind
Questão 5
Questão
Routine ________ is the key to maximizing the production and life of pressure vessels
Responda
-
testing
-
operations
-
shutdowns
-
maintenance
Questão 6
Questão
___________ ______ are leak proof containers that have an internal or external operating pressure
Responda
-
pressure vessels
-
Fired boilers
-
Fractionation towers
-
Milk cartons
Questão 7
Questão
Seismic loads are:
Responda
-
Loads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
-
loads are transient and, when they occur, can result in the production of vibratory forces
-
The design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
-
Pressure vessels located outdoors have additional stresses imposed by wind.
Questão 8
Questão
It is standard practice to __________ an opening with the same cross-sectional area that was removed.
Responda
-
make
-
reinforce
-
cut
-
replace
Questão 9
Questão
The primary hazard in __________ testing is the amount of energy stored in the compressed gas during the test.
Responda
-
hydrostatic
-
pneumatic
-
radiography
-
mag particle
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.