4420775
Descrição
Quiz por Brian Gamble, atualizado more than 1 year ago
|
Criado por Brian Gamble
quase 9 anos atrás
|
|
Questão 1
Questão
Which of the following networkcommands, following the command router eigrp 1, tells this router to start using EIGRP on interfaces whose IP addresses are 10.1.1.1, 10.1.100.1, and 10.1.120.1? (Choose two answers.)
Responda
-
network 10.0.0.0
-
network 10.1.1x.0
-
network 10.0.0.0 0.255.255.255
-
network 10.0.0.0 255.255.255.0
Questão 2
Questão
Routers R1 and R2 attach to the same VLAN with IP addresses 10.0.0.1 and 10.0.0.2, respectively. R1 is configured with the commands router eigrp 99and network 10.0.0.0. Which of the following commands might be part of a working EIGRP configuration on R2 that ensures that the wo routers become neighbors and exchange routes? (Choose two answers.)
Responda
-
network 10
-
network 10.0.0.1 0.0.0.0
-
network 10.0.0.2 0.0.0.0
-
network 10.0.0.0
Questão 3
Questão
In the show ip routecommand, what code designation implies that a route was learned with EIGRP?
Responda
-
E
-
I
-
G
-
D
Questão 4
Questão
Examine the following excerpt from a show command on router R1:
Responda
-
Address 10.1.4.3 identifi es a working neighbor based on that neighbor’s current EIGRP router ID.
-
Address 10.1.5.2 identifi es a router that may or may not become an EIGRP neighbor at some point after both routers check all neighbor requirements.
-
Address 10.1.5.2 identifi es a working neighbor based on that neighbor’s interface IP address on the link between R1 and that neighbor.
-
Address 10.1.4.3 identifies R1’s own IP address on interface S0/0/1.
Questão 5
Questão
Examine the following excerpt from a router’s CLI :
hich of the following identifies a next-hop IP address on a feasible successor route?
Responda
-
10.1.6.3
-
10.1.4.2
-
10.1.5.4
-
It cannot be determined from this command output
Questão 6
Questão
Router R1’s EIGRP process knows of three possible routes to subnet 1. One route is a successor, and one is a feasible successor. R1 is not using the variancecommand to allow for unequal cost load balancing. Which of the following commands happen to show information about the feasible successor route, including its metric, whether as EIGRP topology information or as an IPv4 route?
Responda
-
show ip eigrp topology
-
show ip eigrp database
-
show ip route eigrp
-
show ip eigrp interfaces
Questão 7
Questão
Router R1 has four routes to subnet 2. The one successor route has a metric of 100, and the one feasible successor route has a metric of 350. The other routes have metrics of 450 and 550. R1’s EIGRP configuration includes the variance 5command. Choose the answer that refers to the highest-metric route to subnet 2 that will be visible in the output of the show ip route eigrpcommand on R1 .
Responda
-
The successor route (metric 100)
-
The feasible successor route (metric 350)
-
The route with metric 450
-
The route with metric 550
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.