4688299
Descrição
Quiz por TRAVIS CANNING, atualizado more than 1 year ago
|
Criado por TRAVIS CANNING
mais de 8 anos atrás
|
|
Questão 1
Questão
Compressor lubrication may be divided into two main sections _______ lubrication and ________ lubrication
1. Peripheral
2. Internal
3. Splash
4. External
5. Pressure
Responda
-
1,2
-
3,5
-
2,3,4
-
2,4
Questão 2
Questão
A double acting reciprocating compressor:
Responda
-
Receives and compresses air at the head end of the cylinder
-
Receives and discharges air at both ends of the cylinder
-
Increases the pressure twice from the inlet valve
-
Has one compression stroke for every crankshaft revolution
-
Must have at least two pistons
Questão 3
Questão
Two pre-filters are installed on a package industrial screw compressor. They are installed at the inlet of the:
Responda
-
Water/oil seperator
-
Air dryer
-
After filter
-
Air fluid seperator
-
Moisture seperator
Questão 4
Questão
Reciprocating Compressor valves are usually automatic and open and close by:
Responda
-
Action of a poppet valve
-
Movement of the piston covering or uncovering ports
-
Operation of an air solenoid valve
-
A pressure difference
-
A camshaft
Questão 5
Questão
The axial flow compressor's basic operating principle is similar to a:
Responda
-
Centrifugal compressor
-
Reciprocating compressor
-
Reaction turbine in reverse
-
Reaction turbine
-
Rotary compressor
Questão 6
Questão
The compression Ratio is the ratio of:
Responda
-
Absolute discharge pressure to absolute inlet pressure
-
Gauge discharge pressure to gauge inlet pressure
-
The free air intake to the absolute volumetric discharge
-
The gauge inlet pressure to the absolute discharge pressure
-
Piston diameter to piston stroke
Questão 7
Questão
In a packaged screw compressor package, the bulk of the moisture is removed in the moisture separator in order to decrease the load in the:
Responda
-
Air/fluid seperator
-
Pre-filter
-
Air dryer
-
After filter
-
Water/Oil seperator
Questão 8
Questão
The prime purpose of water-cooling or air cooling an air compressors cylinder is to:
Responda
-
Cool the air
-
Reduce moisture and volume of the air
-
Keep the cylinder at a reasonable temperature
-
Prevent fire from occurring in the receiver
-
Prevent operator injury
Questão 9
Questão
An important advantage of a sliding vane compressor is that it:
Responda
-
Does not require internal lubrication
-
Has a high starting torque
-
Does not require inlet or discharge valves
-
Requires light nylon timing gears
-
Does not require a prime mover
Questão 10
Questão
An air filter on an air compressor inlet pipe is used to:
Responda
-
Reduce the air velocity
-
Keep out the moisture
-
Purify the air by removing exhaust process gases
-
Prevent dust and other particulate from entering the compressor
-
Increase the air velocity
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.