Copiar e Editar

final exam ccna1 (Option C)

Descrição

Option C
Yoab Rodriguez
Quiz por Yoab Rodriguez, atualizado more than 1 year ago
Yoab Rodriguez
Criado por Yoab Rodriguez mais de 7 anos atrás
120
0
0

Resumo de Recurso

Questão 1

Questão
1 A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?
Responda
  • DSL
  • dialup
  • satellite
  • leased line
  • cable modem

Questão 2

Questão
2 What is the purpose of having a converged network?
Responda
  • to provide high speed connectivity to all end devices
  • to make sure that all types of data packets will be treated equally
  • to achieve fault tolerance and high availability of data network infrastructure devices
  • to reduce the cost of deploying and maintaining the communication infrastructure*

Questão 3

Questão
3 What characteristic of a network enables it to quickly grow to support new users and applications without impacting the performance of the service being delivered to existing users?
Responda
  • reliability
  • scalability
  • quality of service
  • accessibility

Questão 4

Questão
4 Which connection provides a secure CLI session with encryption to a Cisco switch?
Responda
  • a console connection
  • an AUX connection
  • a Telnet connection
  • an SSH connection

Questão 5

Questão
5 A network technician is attempting to configure an interface by entering the following command: SanJose(config)# ip address 192.168.2.1 255.255.255.0. The command is rejected by the device. What is the reason for this?
Responda
  • The command is being entered from the wrong mode of operation
  • The command syntax is wrong.
  • The subnet mask information is incorrect.
  • The interface is shutdown and must be enabled before the switch will accept the IP address

Questão 6

Questão
6 After several configuration changes are made to a router, the copy running-configuration startup-configuration command is issued. Where will the changes be stored?
Responda
  • flash
  • ROM
  • NVRAM
  • RAM
  • the configuration register
  • a TFTP server

Questão 7

Questão
7 Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by using the command banner motd V Authorized access only! Violators will be prosecuted! V When users log in using Telnet, the banner does not appear correctly. What is the problem?
Image:
1 (image/png)
Responda
  • The banner message is too long.
  • The delimiting character appears in the banner message.
  • The symbol “!” signals the end of a banner message.
  • Message-of-the-day banners will only appear when a user logs in through the console port.

Questão 8

Questão
8 What are three characteristics of an SVI? (Choose three.)
Responda
  • It is designed as a security protocol to protect switch ports.
  • It is not associated with any physical interface on a switch.
  • It is a special interface that allows connectivity by different types of media.
  • It is required to allow connectivity by any device at any location.
  • It provides a means to remotely manage a switch.
  • It is associated with VLAN1 by default.

Questão 9

Questão
9 A technician configures a switch with these commands: SwitchA(config)# interface vlan 1 SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0 SwitchA(config-if)# no shutdown What is the technician configuring?
Responda
  • Telnet access
  • SVI
  • password encryption
  • physical switchport access

Questão 10

Questão
10 In computer communication, what is the purpose of message encoding?
Responda
  • to convert information to the appropriate form for transmission
  • to interpret information
  • to break large messages into smaller frames
  • to negotiate correct timing for successful communication

Questão 11

Questão
11 What protocol is responsible for controlling the size of segments and the rate at which segments are exchanged between a web client and a web server?
Responda
  • TCP
  • IP
  • HTTP
  • Ethernet

Questão 12

Questão
12 What are two benefits of using a layered network model? (Choose two.)
Responda
  • It assists in protocol design.
  • It speeds up packet delivery.
  • It prevents designers from creating their own model.
  • It prevents technology in one layer from affecting other layers.
  • It ensures a device at one layer can function at the next higher layer.

Questão 13

Questão
13 What is the process of dividing a data stream into smaller pieces before transmission?
Responda
  • segmentation
  • encapsulation
  • encoding
  • flow control

Questão 14

Questão
14 When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for an IPv4 address?
Responda
  • DNS server address
  • subnet mask
  • default gateway
  • DHCP server address

Questão 15

Questão
15 A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?
Responda
  • presentation layer
  • network layer
  • physical layer
  • data link layer

Questão 16

Questão
16 A network engineer is measuring the transfer of bits across the company backbone for a mission critical database application. The engineer notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.)
Responda
  • the amount of traffic that is currently crossing the network
  • the sophistication of the encapsulation method applied to the data
  • the type of traffic that is crossing the network
  • the latency that is created by the number of network devices that the data is crossing
  • the bandwidth of the WAN connection to the Internet
  • the reliability of the gigabit Ethernet infrastructure of the backbone

Questão 17

Questão
17 Which type of UTP cable is used to connect a PC to a switch port?
Responda
  • console
  • rollover
  • crossover
  • straight-through

Questão 18

Questão
18 What is a characteristic of the LLC sublayer?
Responda
  • It provides the logical addressing required that identifies the device.
  • It provides delimitation of data according to the physical signaling requirements of the medium.
  • It places information in the frame allowing multiple Layer 3 protocols to use the same network interface and media.
  • It defines software processes that provide services to the physical layer.

Questão 19

Questão
19 What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.)
Responda
  • error correction through a collision detection method
  • session control using port numbers
  • data link layer addressing
  • placement and removal of frames from the media
  • detection of errors through CRC calculations
  • delimiting groups of bits into frames
  • conversion of bits into data signals

Questão 20

Questão
20 What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address?
Responda
  • It will discard the frame.
  • It will forward the frame to the next host.
  • It will remove the frame from the media.
  • It will strip off the data-link frame to check the destination IP address.

Questão 21

Questão
21 What are two actions performed by a Cisco switch? (Choose two.)
Responda
  • building a routing table that is based on the first IP address in the frame header
  • using the source MAC addresses of frames to build and maintain a MAC address table
  • forwarding frames with unknown destination IP addresses to the default gateway
  • utilizing the MAC address table to forward frames via the destination MAC address
  • examining the destination MAC address to add new entries to the MAC address table

Questão 22

Questão
22 What are two examples of the cut-through switching method? (Choose two.)
Responda
  • store-and-forward switching
  • fast-forward switching
  • CRC switching
  • fragment-free switching
  • QOS switching

Questão 23

Questão
23 Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be in the frame when it leaves host A?
Image:
2 (image/jpeg)
Responda
  • DD:DD:DD:DD:DD:DD
  • 172.168.10.99
  • CC:CC:CC:CC:CC:CC
  • 172.168.10.65
  • BB:BB:BB:BB:BB:BB
  • AA:AA:AA:AA:AA:AA

Questão 24

Questão
24 What are two services provided by the OSI network layer? (Choose two.)
Responda
  • performing error detection
  • routing packets toward the destination
  • encapsulating PDUs from the transport layer
  • placement of frames on the media
  • collision detection

Questão 25

Questão
25 What information is added during encapsulation at OSI Layer 3?
Responda
  • source and destination MAC
  • source and destination application protocol
  • source and destination port number
  • source and destination IP address

Questão 26

Questão
26 What are two functions of NVRAM? (Choose two.)
Responda
  • to store the routing table
  • to retain contents when power is removed
  • to store the startup configuration file
  • to contain the running configuration file
  • to store the ARP table

Questão 27

Questão
27 Refer to the exhibit. The network administrator for a small advertising company has chosen to use the 192.168.5.96/27 network for internal LAN addressing. As shown in the exhibit, a static IP address is assigned to the company web server. However, the web server cannot access the Internet. The administrator verifies that local workstations with IP addresses that are assigned by a DHCP server can access the Internet, and the web server is able to ping local workstations. Which component is incorrectly configured?
Image:
3 (image/png)
Responda
  • subnet mask
  • DNS address
  • host IP address
  • default gateway address

Questão 28

Questão
28 Why does a Layer 3 device perform the ANDing process on a destination IP address and subnet mask?
Responda
  • to identify the broadcast address of the destination network
  • to identify the host address of the destination host
  • to identify faulty frames
  • to identify the network address of the destination network

Questão 29

Questão
29 What are the three ranges of IP addresses that are reserved for internal private use? (Choose three.)
Responda
  • 10.0.0.0/8
  • 64.100.0.0/14
  • 127.16.0.0/12
  • 172.16.0.0/12
  • 192.31.7.0/24
  • 192.168.0.0/16

Questão 30

Questão
30 Which three addresses are valid public addresses? (Choose three.)
Responda
  • 198.133.219.17
  • 192.168.1.245
  • 10.15.250.5
  • 128.107.12.117
  • 192.15.301.240
  • 64.104.78.227

Questão 31

Questão
31 What type of IPv6 address is FE80::1?
Responda
  • loopback
  • link-local
  • multicast
  • global unicast

Questão 32

Questão
32 Refer to the exhibit. On the basis of the output, which two statements about network connectivity are correct? (Choose two.)
Image:
4 (image/png)
Responda
  • There is connectivity between this device and the device at 192.168.100.1.
  • The connectivity between these two hosts allows for videoconferencing calls.
  • There are 4 hops between this device and the device at 192.168.100.1.
  • The average transmission time between the two hosts is 2 milliseconds.
  • This host does not have a default gateway configured.

Questão 33

Questão
33 Which subnet would include the address 192.168.1.96 as a usable host address?
Responda
  • 192.168.1.64/26
  • 192.168.1.32/27
  • 192.168.1.32/28
  • 192.168.1.64/29

Questão 34

Questão
34 How many hosts are addressable on a network that has a mask of 255.255.255.248?
Responda
  • 2
  • 6
  • 8
  • 14
  • 16
  • 254

Questão 35

Questão
35 Which statement is true about variable-length subnet masking?
Responda
  • Each subnet is the same size.
  • The size of each subnet may be different, depending on requirements.
  • Subnets may only be subnetted one additional time.
  • Bits are returned, rather than borrowed, to create additional subnets.

Questão 36

Questão
36 Refer to the exhibit. Consider the IP address of 192.168.10.0/24 that has been assigned to a high school building. The largest network in this building has 100 devices. If 192.168.10.0 is the network number for the largest network, what would be the network number for the next largest network, which has 40 devices?
Image:
5 (image/jpeg)
Responda
  • 192.168.10.0
  • 192.168.10.128
  • 192.168.10.192
  • 192.168.10.224
  • 192.168.10.240

Questão 37

Questão
37 In what two situations would UDP be the preferred transport protocol over TCP? (Choose two.)
Responda
  • when applications need to guarantee that a packet arrives intact, in sequence, and unduplicated
  • when a faster delivery mechanism is needed
  • when delivery overhead is not an issue
  • when applications do not need to guarantee delivery of the data
  • when destination port numbers are dynamic

Questão 38

Questão
38 What important information is added to the TCP/IP transport layer header to ensure communication and connectivity with a remote network device?
Responda
  • timing and synchronization
  • destination and source port numbers
  • destination and source physical addresses
  • destination and source logical network addresses

Questão 39

Questão
39 What is the TCP mechanism used in congestion avoidance?
Responda
  • three-way handshake
  • socket pair
  • two-way handshake
  • sliding window

Questão 40

Questão
40 Which three statements characterize UDP? (Choose three.)
Responda
  • UDP provides basic connectionless transport layer functions.
  • UDP provides connection-oriented, fast transport of data at Layer 3.
  • UDP relies on application layer protocols for error detection.
  • UDP is a low overhead protocol that does not provide sequencing or flow control mechanisms
  • UDP relies on IP for error detection and recovery.
  • UDP provides sophisticated flow control mechanisms

Questão 41

Questão
41 Which two tasks are functions of the presentation layer? (Choose two.)
Responda
  • compression
  • addressing
  • encryption
  • session control
  • authentication

Questão 42

Questão
42 Which two protocols operate at the highest layer of the TCP/IP protocol stack? (Choose two.)
Responda
  • DNS
  • Ethernet
  • IP
  • POP
  • TCP
  • UDP

Questão 43

Questão
43 Which two roles can a computer assume in a peer-to-peer network where a file is being shared between two computers? (Choose two.)
Responda
  • client
  • master
  • server
  • slave
  • transient

Questão 44

Questão
44 What is the function of the HTTP GET message?
Responda
  • to request an HTML page from a web server
  • to send error information from a web server to a web client
  • to upload content to a web server from a web client
  • to retrieve client email from an email server using TCP port 110

Questão 45

Questão
45 A wireless host needs to request an IP address. What protocol would be used to process the request?
Responda
  • FTP
  • HTTP
  • DHCP
  • ICMP
  • SNMP

Questão 46

Questão
46 When planning for network growth, where in the network should packet captures take place to assess network traffic?
Responda
  • on as many different network segments as possible
  • only at the edge of the network
  • between hosts and the default gateway
  • only on the busiest network segment

Questão 47

Questão
47 When applied to a router, which command would help mitigate brute-force password attacks against the router?
Responda
  • exec-timeout 30
  • service password-encryption
  • banner motd $Max failed logins = 5$
  • login block-for 60 attempts 5 within 60

Questão 48

Questão
48 Refer to the exhibit. An administrator is testing connectivity to a remote device with the IP address 10.1.1.1. What does the output of this command indicate?
Image:
6 (image/png)
Responda
  • Connectivity to the remote device was successful.
  • A router along the path did not have a route to the destination.
  • A ping packet is being blocked by a security device along the path.
  • The connection timed out while waiting for a reply from the remote device.

Questão 49

Questão
49 A user is unable to reach the web site when typing http://www.cisco.com in a web browser, but can reach the same site by typing http://72.163.4.161. What is the issue?
Responda
  • default gateway
  • DHCP
  • DNS
  • TCP/IP protocol stack

Questão 50

Questão
50 What source IP address does a router use by default when the traceroute command is issued?
Responda
  • the highest configured IP address on the router
  • a loopback IP address
  • the IP address of the outbound interface
  • the lowest configured IP address on the router

Questão 51

Questão
51 Match each item to the type of topology diagram on which it is typically identified. (Not all options are used.)
Responda

Questão 52

Questão
52 Match the description with the associated IOS mode. (Not all options are used.)
Responda

Questão 53

Questão
53 Match the situation with the appropriate use of network media.
Responda

Questão 54

Questão
54 Refer to the exhibit. Match the packets with their destination IP address to the exiting interfaces on the router. (Not all options are used.)
Responda

Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.

Semelhante

Matemática Básica
Alessandra S.
Períodos da História do Brasil
KesiaKeith
Combate a Incêndio - capítulo três
willian reis
Espécies de Atos Administrativos - NONEP
Silvana Dolinski
Movimento Uniforme e Movimento Uniformemente Variado
GoConqr suporte .
Sistema Digestório
Isabela Marques
HISTÓRIA DO BRASIL COLONIAL (1ª PARTE)
Lucas Villar
Uso da vírgula
Kekê Dantas
Endotérmico ou Exotérmico?
Andrea Borges
Fisiologia Humana
Felipe Penha
Nutrição para o Cérebro e a Memória
Joana Meira
Explore a Biblioteca