Windows Server 2016 70-740 - Simulado V

Question #01 HOTSPOT - You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 connect to the same network. Server1 and Server2 have virtual switches configured as shown in the following table. You have nine virtual machines configured as shown in the following table. All of the virtual machines are configured to have IP addresses from the same network segment. The firewall on each of the virtual machines is configured to allow network connectivity. To which virtual machines can you connect from VM1 and VM2? To answer, select the appropriate options in the answer area. Hot Area: Obs: Não marcar as imagens, só estão pra ajudar na ilustração, e na formulação da questão e da resposta.

Question #02 Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series. A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines. The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers. You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume. The CIO of Contoso identifies the following requirements for the company's IT department: Deploy a failover cluster to two new virtual machines. ✑ Store all application databases by using Encrypted File System (EFS). ✑ Ensure that each Windows container has a dedicated IP address assigned by a DHCP server. ✑ Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours. ✑ Encrypt all communication between the internal network and the perimeter network, including all WSUS communications. ✑ Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent. Which networking mode should you configure for the Windows containers?

Question #03 DRAG DROP - Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series. A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines. The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers. You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume. The CIO of Contoso identifies the following requirements for the company's IT department: ✑ Deploy a failover cluster to two new virtual machines. ✑ Store all application databases by using Encrypted File System (EFS). ✑ Ensure that each Windows container has a dedicated IP address assigned by a DHCP server. ✑ Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.Encrypt all communication between the internal network and the perimeter network, including all WSUS communications. ✑ Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent. You need to configure the storage solution for the planned failover cluster. You create two new generations 2 virtual machines on two separate Hyper-V hosts named VM11 and VM12. Which three actions should you perform in sequence next? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Question #04 DRAG DROP - On a new server, you install Windows Server 2016, and then you install the Hyper-V server role. You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server. Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order. Select and Place:

Question #05 HOTSPOT - You have a server named Server1 that runs Windows Servers 2016. Server1 has a storage array that contains multiple storage enclosures. The storage hardware supports enclosure awareness. You need to implement Storage Spaces on Server1. Storage Spaces must remain available if two enclosures fail. The solution must minimize the number of enclosures required and must provide the fastest possible write performance. Which configurations should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Question #06 HOTSPOT - You have a server named Server1 that runs Windows Server 2016. You mount an image of Windows Server 2016 to C:\Folder1\. You need to disable support for SMB 1.0 in the image. Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Question #07 Your network contains an Active Directory domain named contoso.com. All server run Windows Server 2016. As a domain administrator, you log on to a server named Server2 and open Windows PowerShell. You need to establish an interactive PowerShell session to a server named Server1. Which command should you run?

Question #08 HOTSPOT - You have a server named Server1 that runs Windows Server 2016. You create a storage pool named Pool1. Pool1 contains three disks. You need to create a two-way mirror storage space from the disks in Pool1. Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Question #09 You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The Web Server role is installed on each node. Users report that when they submit web form data, sometimes the data is not stored, and they must fill in the form again. You need to resolve the issue. The solution must ensure that connections are load balanced between Server1 and Server2. What should you do in the NLB cluster?

Question #10 You have a Windows Server 2106 failover cluster named Cluster1 that contains four nodes named Server1, Server2, Server3, and Server4. Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes. Server1 and Server2 are located in a data center in Madrid. Server3 and Server4 are located in a data center in Barcelona. You need to ensure that when you pause a node, the clustered virtual machines will always attempt to move automatically to another node in the same data center before attempting to move to a node in the other data center. Which two actions should you perform? Each correct answer presents part of the solution.

Question #11 You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 has the following settings: ✑ Nested virtualization is enabled. ✑ Dynamic Memory is disabled. VM1 is currently running. You need to adjust the amount of memory assigned to VM1 as quickly as possible. What should you do first?

Question #12 Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series. A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines. The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers. You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume. The CIO of Contoso identifies the following requirements for the company's IT department: ✑ Deploy a failover cluster to two new virtual machines. ✑ Store all application databases by using Encrypted File System (EFS). ✑ Ensure that each Windows container has a dedicated IP address assigned by a DHCP server. ✑ Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours. ✑ Encrypt all communication between the internal network and the perimeter network, including all WSUS communications. ✑ Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent. Which two actions should you perform to meet the encryption requirement for WSUS? Each correct answer presents part of the solution.

Question #13 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have two servers that run Windows Server 2016. You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be on a separate subnet and to have static IP addresses. You configure the cluster to use unicast. Does this meet the goal?

Question #14 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed. You pull the Microsoft/iis Docker image to Server1. You need to view the available space in the Microsoft/iis Docker image. Solution: You run the command docker run ""d Microsoft/iis. You open Disk Management on Server1. Does this meet the goal?

Question #15 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have two servers that run Windows Server 2016. You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed. You pull the Microsoft/iis Docker image to Server1. You need to view the available space in the Microsoft/iis Docker image. Solution: You run the following commands. docker run ""name container1 ""isolation hyperv ""d Microsoft/iis docker exec ""i container1 cmd.exe dir Does this meet the goal?

Question #16 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have two servers that run Windows Server 2016. You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed. You pull the Microsoft/iis Docker image to Server1. You need to view the available space in the Microsoft/iis Docker image. Solution: You run the following commands. docker run ""name container1 ""d Microsoft/iis docker exec ""i container1 cmd.exe dir Does this meet the goal?

Question #17 DRAG DROP - You have a server named Server1 that runs Windows Server 2016. You open a command prompt on Server1 and run the following commands. You back up the data on Disk 1. You plan to convert Disk 1 to a GPT disk, and then to restore the data to Disk 1. Which four DiskPart commands should you run in sequence before you restore the data? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order. Select and Place:

Question #18 You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. Server2 hosts a virtual machine named VM2. Server3 hosts the disks and the configurations of both virtual machines on an SMB share named VMShare. All servers are joined to an Active Directory domain. You use Server4 to manage Hyper-V operations on Server1 and Server2. From Server4, you attempt to perform a live migration of VM1 and VM2, but you receive the following error message: "No credentials are available in the security package". You need to ensure that you can perform the live migration of VM1 and VM2 between Server1 and Server2 while signed in to Server4. What should you do?

Question #19 You have a server that runs Windows Server 2016 Standard. You create a new three-way mirror storage space. You format the storage space by using ReFS. Which two features can you use on the new storage space? Each correct answer presents a complete solution.

Question #20 HOTSPOT - You have a Hyper-V host named Server1 that runs Windows Server 2016 datacenter. Server1 is activated. On Server1, you deploy a virtual machine named VM1 that has a Server Core installation of Windows Server 2016 Standard. You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA). Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Question #21 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com. You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table. You need to ensure that you can perform a live migration of VM1 from Host1 to Host2. Solution: You replace the processor in Host1 with a processor that is identical to the processor in Host2. Does meet the goal?

Question #22 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed. You pull the Microsoft/iis Docker image to Server1. You need to view the available space in the Microsoft/iis Docker image. Solution: You run the command docker run ""isolation hyperv -d microsoft/iis. You open Disk Management on Server1. Does this meet the goal?

Question #23 You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. On VM1, Dynamic Memory is disabled, MAC spoofing is enabled for the virtual network adapter, and checkpoints are disabled. You need to ensure that you can install the Hyper-V server role on VM1. What should you do?

Question #24 You have a Nano Server named Nano1. Nano1 is configured to perform real-time protection scans by using Windows Defender. You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans. What should you do?

Question #25 You have a server named Server1 that runs Windows Server 2016 and has the File and Storage Services server role installed. Server1 has an ReFS-formatted volume named Volume1 that is 512 GB. Volume1 is mounted as C:\App1\temp. You need to ensure that you can enable deduplication of Volume1. What should you do?

Question #26 You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as shown in the following table. You need to ensure that you can use all of the available space on each disk. What is one of the disks that you must initialize as a GPT disk?

Question #27 You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2012 R2. The servers are nodes in a failover cluster named Cluster1. You perform a rolling upgrade of the cluster nodes to Windows Server 2016. You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?

Question #28 You have a Windows Server 2016 failover cluster named Cluster1 that contains four nodes named Server1, Server2, Server3, and Server4. You need to configure Cluster 1 to use directly attached storage to store several virtual machines. You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1. What should you do next?

Question #29 You have a Hyper-V server named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 connects to an external virtual switch named Switch1. You can ping VM1 from Server1. You upgrade Server1 to Windows Server 2016. You need to ensure that you can connect to VM1 by using PowerShell Direct. What should you do?

Question #30 DRAG DROP - Your network contains an Active Directory domain named adatum.com. The domain contains four member servers that run Windows Server 2016. On each server, you locally attach three disks and install the Failover Clustering feature. You need to create a volume that uses all the disks. The volume must be highly available. Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order. Select and Place:

Question #31 You have a server named Server1 that runs Windows Server 2016. Windows Defender is enabled on Server1. Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, MicrosoftOneDrive, and Microsoft SharePoint Online. App1 also interacts with several local services. You need to prevent Windows Defender from scanning any files opened by App1. What should you do on Server1?

Question #32 You have a server named Server1 that runs Windows Server 2016. Server1 has two network adapters that support single root I/O virtualization (SR-IOV). The network adapters are from two different vendors. You plan to install the Hyper-V server role on Server1, and then to create a virtual machine named VM1 that runs Windows Server 2016. VM1 will use SR-IOV. You need to ensure that VM1 can use both network adapters for load balancing and failover. What should you do?

Question #33 You have a server named Server1 that runs Windows Server 2016. Server1 is a Docker host. You are creating a Dockerfile to build a Docker image. You need to add a file named File1.txt from Server1 to C:\Folder1\ in the Docker image. What are two possible commands that you can use to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

Question #34 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are a server administrator at a company named Contoso, Ltd. Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table. All of the virtual switches are of the external type. You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network. Solution: You implement live migration by using Host1 and Host3. Does this meet the goal?

Question #35 HOTSPOT - You have a server named VM1. VM1 is a virtual machine on a Hyper-V host that runs Windows Server 2016. You need to create a checkpoint that includes the virtual machine memory state of VM1. What command should you run? To answer, select the appropriate options in the answer area. Hot Area:

Question #36 You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as shown in the following table. You need to ensure that you can use all of the available space on each disk. What is one of the disks that you must initialize as a GPT disk?

Question #37 You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run?

Question #38 Your network contains an Active Directory domain named adatum.com. The domain contains a Network Load Balancing (NLB) cluster as shown in the exhibit. (Click the Exhibit button.) Which hosts will respond to requests sent to nlb.adatum.com?

Question #39 You have a server named Server1 that runs Windows Server 2016. The server has an application named App1. App1 writes entries to the Application event log when errors are encountered. The events have IDs of either 111 or 112. You need to restart the service whenever either of these events is logged. What should you do?

Question #40 You have a Network Load Balancing (NLB) cluster that contains two nodes named Server1 and Server2. The nodes run Windows Server 2016. The NLB cluster has the following configuration. You deploy the Web Server (IIS) server role identically to both servers. You need to configure NLB to load balance requests between the web servers. HTTP requests must be stateless. HTTPS requests must be stateful. What should you do? Each correct answer presents part of the solution

Question #41 DRAG DROP - Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have multiple local disks attached. You need to create a storage pool by using Storage Spaces Direct. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Question #42 You have a server named Server1 that runs Windows Server 2016. Windows Defender is enabled on Server1. Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, MicrosoftOneDrive, and Microsoft SharePoint Online. App1 also interacts with several local services. You need to prevent Windows Defender from scanning any files opened by App1. What should you do on Server1?

Question #43 You have a server named Server1. Server1 contains a drive named D hat has Data Deduplication enabled. You delete 1 TB of files from drive D. You need to ensure that you can use all the disk space that was used by the deleted files as soon as possible. What should you run?

Question #44 You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run?

Question #45 You have a Windows Server 2016 Server Core named Server1. Server1 is configured to perform real-time protection scans by using Windows Defender. You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans. What should you do?

Question #46 You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012. VM1 has the following configuration. You discover that when you back up Server1, VM1 temporarily pauses. You need to ensure that you can back up Server1 without causing downtime on VM1. What should you do?

Question #47 You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

Question #48 You have two servers named Server1 and Server2 that run Windows Server 2016. You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps. Which cmdlet should you run?

Question #49 You have a server named Server1. Server1 contains a drive named D hat has Data Deduplication enabled. You delete 1 TB of files from drive D. You need to ensure that you can use all the disk space that was used by the deleted files as soon as possible. What should you run?

Question #50 Your network contains an on-premises Active Directory domain. The domain contains 25 servers that run Windows Server 2016. You have a hybrid deployment of Microsoft Azure Active Directory (Azure AD). You plan to manage the servers by using Windows Admin Center. You install Windows Admin Center on one of the servers. You need to ensure that connections to Windows Admin Center are authenticated by using multi-factor authentication (MFA). What should you do first?