Question 1
Question
What sequence on a protein helps us target to the endoplasmic reticulum?
Question 2
Question
The signal sequence is the first part of a ER-targeted protein to be synthesised.
Question 3
Question
At which peptide terminal is the signal sequence found?
Question 4
Question
The signal sequence codes for a series of hydrophilic amino acids.
Question 5
Question
What molecule binds to a protein-ribosome complex and facilitates binding to a receptor on the endoplasmic reticulum?
Question 6
Question
Through what protein is the new protein guided through after it has been targeted to the endoplasmic reticulum?
Question 7
Question
Fill in the blanks below to describe protein targeting to the endoplasmic reticulum.
1. The first part of the protein synthesised is the [blank_start]signal sequence[blank_end]. This is a series of [blank_start]hydrophobic[blank_end] amino acids at the [blank_start]N[blank_end]-terminus of the peptide.
2. The [blank_start]signal sequence[blank_end] is recognised by [blank_start]Signal Recognition Particle[blank_end] (SRP).
3. [blank_start]Signal Recognition Particle[blank_end] is recognised by a receptor on the ER membrane.
4. The [blank_start]Signal Recognition Particle[blank_end] is cleaved off, leaving the [blank_start]ribosome[blank_end] bound to the ER membrane.
5. The protein is guided through a t[blank_start]ranslocon[blank_end] protein on the ER membrane as its synthesis continues.
6. The enzyme [blank_start]signal peptidase[blank_end] cleaves the signal sequence off the protein once synthesis is complete.
Answer
-
signal sequence
-
hydrophobic
-
N
-
signal sequence
-
Signal Recognition Particle
-
Signal Recognition Particle
-
Signal Recognition Particle
-
ribosome
-
ranslocon
-
signal peptidase
Question 8
Question
From which face of the golgi are vesicles budded off for transport?
Question 9
Question
At which face of the golgi are vesicles received from transport?
Question 10
Question
SNARE proteins facilitate the targeting of what?
Answer
-
Vesicles
-
ER proteins
-
Golgi apparatus proteins
-
Nuclear proteins
Question 11
Question
When are v-SNARES incorporated into the membranes of vesicles?
Question 12
Question
What type of SNARE proteins are present at the target membranes where they will be complementary to a specific v-SNARE?
Answer
-
t-SNARE
-
m-SNARE
-
f-SNARE
-
p-SNARE
Question 13
Question
When does mitochondrial targeting occur?
Question 14
Question
At which terminus of a mitochondrial-targeted protein will you find the matrix-targeting sequence?
Question 15
Question
What protein binds to mitochondrial-targeted proteins in the cytosol and matrix to prevent them from folding?
Answer
-
HSP70 chaperone
-
TIM44
-
TOM40
-
TIM23/17
Question 16
Question
The matrix targeting sequence binds to what?
Question 17
Question
What import pore is the mitochondrial protein targeted into first?
Question 18
Question
Cytosolic HSP70 is cleaved from the mitochondrial protein as it enters the first import pore.
Question 19
Question
What is required to cleave HSP70 chaperone from mitochondrial proteins?
Answer
-
ATP hydrolysis
-
GTP hydrolysis
-
ATP synthesis
-
Coenzyme A
Question 20
Question
What is the function of matrix processing protease?
Question 21
Question
Fill in the blanks below to describe how proteins are targeted to the mitochondria.
1. The [blank_start]matrix-targeting sequence[blank_end] is found at the [blank_start]N[blank_end] terminal of the protein.
2. Cytosolic [blank_start]HSP70[blank_end] binds to the protein using energy from [blank_start]ATP[blank_end] to prevent the protein from [blank_start]folding[blank_end].
3. The [blank_start]matrix-targeting sequence[blank_end] binds to an [blank_start]import receptor[blank_end] on the outer membrane.
4. The [blank_start]import receptor[blank_end] targets the protein through [blank_start]TOM40[blank_end]. Meanwhile, [blank_start]HSP70[blank_end] is cleaved from the protein using [blank_start]ATP[blank_end] hydrolysis.
5. The protein enters the matrix via import pores [blank_start]TIM44[blank_end] and TIM23/[blank_start]17[blank_end].
6. The protein binds to matrix [blank_start]HSP70[blank_end] to prevent it from [blank_start]folding[blank_end].
7. [blank_start]Matrix processing protease[blank_end] enzyme cleaves the [blank_start]matrix-targeting sequence[blank_end] from the protein.
8. The protein can now begin [blank_start]folding[blank_end].
Answer
-
matrix-targeting sequence
-
N
-
HSP70
-
ATP
-
folding
-
matrix-targeting sequence
-
import receptor
-
import receptor
-
TOM40
-
HSP70
-
ATP
-
TIM44
-
17
-
HSP70
-
folding
-
Matrix processing protease
-
matrix-targeting sequence
-
folding
Question 22
Question
When does the targeting of proteins to the nucleus occur?
Question 23
Question
What property does the Nuclear Localisation Signal have that allows it to target?
Answer
-
Basic
-
Acidic
-
Polar
-
Hydrophobic
Question 24
Question
What protein does the nuclear localisation sequence bind to?
Answer
-
Importin
-
Ran
-
RanGEF
-
SNARE
Question 25
Question
Ran binds to GTP in the cytosol.
Question 26
Question
What converts RanGDP to RanGTP in the cytosol?
Question 27
Question
What happens to RanGTP in the nucleus?
Question 28
Question
Importin and RanGTP are recycled by their exit from the nucleus after targeting takes place.
Question 29
Question
What does cytosolic Ran GTPase activated protein do?
Answer
-
Stimulates hydrolysis of RanGTP to RanGDP
-
Stimulates formation of RanGTP from RanGDP
-
Activates binding of importin to RanGTP
-
Activates cleavage of importin from Nuclear Localisation Sequence
Question 30
Question
What triggers the release of importin from Ran?
Answer
-
Hydrolysis of RanGTP to RanGDP
-
Change in pH of the cytosol
-
Formation of RanGTP from RanGDP
-
Action of RanGEF
Question 31
Question
Fill in the blanks below to describe the targeting of proteins to the nucleus.
1. The [blank_start]Nuclear Localisation Sequence[blank_end] on the protein binds to [blank_start]importin[blank_end] in the cytosol.
2. Ran binds to [blank_start]GDP[blank_end] in the cytosol.
3. Both of these complexes enter the nucleus via [blank_start]nuclear pores[blank_end].
4. In the nucleus, Ran [blank_start]Guanine Nucleotide Exchange Factor[blank_end] (RanGEF) converts RanGDP to [blank_start]RanGTP[blank_end].
5. [blank_start]RanGTP[blank_end] binds to [blank_start]importin[blank_end]. This disrupts [blank_start]importin[blank_end]'s ability to bind to the [blank_start]Nuclear Localisation Sequence[blank_end]. The protein is released.
6. Importin and Ran[blank_start]GTP[blank_end] exit the nucleus via a nuclear pore.
7. Cytosolic Ran [blank_start]GTPase activated protein[blank_end] (Ran GAP) stimulates Ran to hydrolyse [blank_start]GTP[blank_end] to [blank_start]GDP[blank_end].
8. [blank_start]RanGDP[blank_end] allows the release of [blank_start]importin[blank_end].
Answer
-
Nuclear Localisation Sequence
-
importin
-
GDP
-
nuclear pores
-
Guanine Nucleotide Exchange Factor
-
RanGTP
-
RanGTP
-
importin
-
importin
-
Nuclear Localisation Sequence
-
GTP
-
GTPase activated protein
-
GTP
-
GDP
-
RanGDP
-
importin
Question 32
Question
What are lysosomal proteins tagged with in the Golgi apparatus?
Answer
-
Mannose-6-phosphate
-
Glucokinase
-
Phosphate
-
Importin
Question 33
Question
Mannose-6-phosphate and lysosomal proteins are targeted to transport vesicles in the Golgi via what?
Answer
-
M6P receptors
-
Importin
-
TOM40
-
SNAREs
Question 34
Question
What do transport vesicles from the Golgi containing lysosomal proteins fuse with?
Question 35
Question
ATP synthase continuously pumps H+ into the endosome containing lysosomal proteins. What does this cause?
Answer
-
Dissociation from M6P receptor and a phosphate to form mature hydrolase
-
Dissociation from M6P receptor only
-
Dissociation from a phosphate to form mature hydrolase
-
Cleavage of the lysosomal protein into two products
Question 36
Question
M6P receptors used in lysosomal proteins are targeted back to the Golgi.
Question 37
Question
Fill in the blanks below to describe how proteins are targeted to the lysosomes.
1. Lysosomal proteins are tagged with [blank_start]mannose-6-phosphate[blank_end] in the [blank_start]Golgi apparatus[blank_end].
2. This complex binds to [blank_start]mannose-6-phosphate[blank_end] receptors and is packaged into [blank_start]vesicles[blank_end].
3. [blank_start]Vesicles[blank_end] bud off the [blank_start]trans[blank_end] face of the Golgi apparatus and travel to the early [blank_start]endosome[blank_end] with which they fuse.
4. [blank_start]ATP synthase[blank_end] continuously pumps [blank_start]H+[blank_end] ions into the enzyme, reducing the [blank_start]pH[blank_end].
5. The low [blank_start]pH[blank_end] causes the [blank_start]receptor[blank_end] to be dissociated from the complex as well as [blank_start]dephosphorylation[blank_end] to form a mature hydrolase protein.
6. The receptors are recycled back to the [blank_start]Golgi apparatus[blank_end] via transport [blank_start]vesicles[blank_end].
Answer
-
mannose-6-phosphate
-
Golgi apparatus
-
mannose-6-phosphate
-
vesicles
-
trans
-
Vesicles
-
endosome
-
ATP synthase
-
H+
-
pH
-
pH
-
receptor
-
dephosphorylation
-
vesicles
-
Golgi apparatus
Question 38
Question
What disease is caused by a mutation in the enzyme that phosphorylates mannose?
Question 39
Question
In [blank_start]inclusion-cell[blank_end] disease, the enzyme that phosphorylates [blank_start]mannose[blank_end] is mutated. This means that lysosomal proteins aren't tagged with [blank_start]mannose-6-phosphate[blank_end] so are not targeted to the [blank_start]lysosomes[blank_end]. The [blank_start]lysosomes[blank_end] therefore lose their function and [blank_start]waste[blank_end] accumulates within the cells. This causes developmental defects and often death before the age of 10 due to heart failure/pneumonia.
Answer
-
inclusion-cell
-
mannose
-
mannose-6-phosphate
-
lysosomes
-
lysosomes
-
waste