power prep quiz 13

Description

power engineering 3b2 Quiz on power prep quiz 13, created by TRAVIS CANNING on 28/02/2016.
TRAVIS CANNING
Quiz by TRAVIS CANNING, updated more than 1 year ago
TRAVIS CANNING
Created by TRAVIS CANNING almost 9 years ago
2
1

Resource summary

Question 1

Question
The absolute discharge pressure compared to the absolute intake pressure is referred to as
Answer
  • guage pressure
  • compression ratio
  • isentropic exponent
  • isothermal compression
  • absolute pressure

Question 2

Question
Air at normal atmospheric conditions located at the compressor inlet is termed
Answer
  • free air
  • interstage air
  • compression air
  • ambient air
  • unloaded air

Question 3

Question
The volumetric efficiency of an air compressor is the ratio of
Answer
  • 1st stage cylinder volume to 2nd stage cylinder volume
  • inlet air temperature compared to discharge air temperature
  • capacity to displaced volume
  • isothermal compression compared to adiabatic compression
  • cylinder volume compared to air receiver volume

Question 4

Question
An air compression curve on a pressure-volume diaphragm will be:
Answer
  • pure polytropic
  • purely isentropic
  • purely isothermal
  • somewhere between constant pressure and constant volume
  • somewhere between adiabatic and isothermal

Question 5

Question
The clearance volume on an air compressor
Answer
  • has no effect on discharge capacity
  • has a direct effect on compressor capacity
  • varies with the speed of the compressor
  • must be large enough to prevent the cylinder overheating
  • is important in the event that there is moisture in the air being compressed

Question 6

Question
An air compressor at a significantly higher altitude compared to an air compressor at a lower altitude will deliver:
Answer
  • less volume of air
  • higher volume of air
  • less mass of air
  • more mass of air
  • an equal mass of air

Question 7

Question
The effect of moisture in a compressed air system is detrimental because:
Answer
  • it will lower the discharge air temperature
  • it will cause corrosion in the air piping
  • it will freeze in the winter
  • it will plug the actuators
  • it requires more power to compress the air

Question 8

Question
The term dewpoint is defined as
Answer
  • saturation pressure of the air
  • the temperature of the air when it begins to absorb moisture
  • relative humidity
  • the temperature of the air when water vapour begins to condense
  • none of the above

Question 9

Question
Air compressors may be classified as either:
Answer
  • positive displacement and dynamic
  • single acting and double acting
  • single stage and multi stage
  • positive displacement and negative displacement
  • centrifugal and reciprocating

Question 10

Question
which type of air compressor is best suited for high pressure, moderate volume applications
Answer
  • reciprocating
  • centrifugal
  • rotary
  • dynamic
  • axial

Question 11

Question
A reciprocating air compressor compared to a rotary air compressor is:
Answer
  • more efficient
  • less efficient
  • equally efficient
  • easier to operate
  • requires less lubrication

Question 12

Question
which of the following is a positive displacement compressor:
Answer
  • axial
  • centrifugal
  • turbine
  • reciprocating
  • none of the above

Question 13

Question
A reciprocating compressor has the ability to deliver oil-free air if:
Answer
  • no oil is used to lubricate the cylinder
  • the piston uses Teflon rings
  • if the exhaust air is filtered prior to entering the air reciever
  • not possible to deliver oil free air
  • synthetic oil is used instead of conventional oil

Question 14

Question
A reciprocating air compressor is suitable for:
Answer
  • pulsation free air
  • low pressure applications
  • all pressure ranges
  • delivering moisture free air
  • all of the above

Question 15

Question
The piston on an air compressor may be made of
Answer
  • alloy steel
  • cast iron
  • steel
  • aluminum
  • all of the above

Question 16

Question
A double-acting reciprocating compressor:
Answer
  • has more than one stage
  • may compress more than one fluid at a time
  • must utilize an intercooler
  • receives and discharges air at both ends of the cylinder
  • is of a dynamic axial design
Show full summary Hide full summary

Similar

Input and Output Devices
Jess Peason
GCSE AQA Chemistry - Unit 3
James Jolliffe
PSYA1 - attachment, AQA psychology
T W
Electrolysis
lisawinkler10
IGCSE Chemistry Revision
sachakoeppen
Chemistry 2
Peter Hoskins
PSBD TEST # 3_1_1
yog thapa
Conocimiento General de Aeronaves
Adriana Forero
Repaso Revalida PR 2016
Rodrigo Lopez
Mapa Mental para Resumir y Conectar Ideas
Rosario Sharline Vilcarromero Saenz