Tech Ed Tools Test #2

Description

9th grade Trades Quiz on Tech Ed Tools Test #2, created by Mike Driscoll on 23/03/2017.
Mike Driscoll
Quiz by Mike Driscoll, updated more than 1 year ago More Less
Mike Driscoll
Created by Mike Driscoll over 7 years ago
Mike Driscoll
Copied by Mike Driscoll over 7 years ago
299
0

Resource summary

Question 1

Question
The name of the tool in the picture is...
Answer
  • A rotating saw
  • A reprimanding saw
  • A revololting saw
  • A reciprocating Saw

Question 2

Question
Using information from the picture, where should your place a fence to cut off 4 & 2/16 inches from the board using a circular saw?
Answer
  • 4 5/16
  • 3 1/16
  • 5 3/16
  • 5 3/8

Question 3

Question
What part of the saw is the arrow pointing to in the picture?
Answer
  • The Guard
  • The Shield
  • The Catch
  • The Cover
  • The Cut Inhibitor

Question 4

Question
The tool in the picture is called a belt saw.
Answer
  • True
  • False

Question 5

Question
The tool in the picture is called a reciprocating saw.
Answer
  • True
  • False

Question 6

Question
Chose the picture of a Scroll Saw.

Question 7

Question
The notch at the bottom of the pictured bit is necessary if you want to use the bit with what tool?
Answer
  • a driver
  • a drill
  • a drill press
  • a router
  • a computer

Question 8

Question
The tool in the picture is called a random orbital sander.
Answer
  • True
  • False

Question 9

Question
Choose ONLY the following tools from the pictures available: - A Belt Sander - A Compact Router

Question 10

Question
Select the names of all the tools that are NOT in the picture.
Answer
  • random orbital sander
  • drill press
  • belt sander
  • router
  • drill
  • jig saw
  • circular saw
  • reciprocating saw
  • miter saw
  • band saw

Question 11

Question
The tool in the picture being used to glue this box together is called a [blank_start]pipe clamp[blank_end].
Answer
  • pipe clamp

Question 12

Question
If I asked you to hand me screw drivers for the three screws shown in the picture , starting on the left and moving to the right, you would hand me
Answer
  • 1. A Strait Head screwdriver 2. A Phil Head Screwdriver 3. A Star head Screwdriver
  • 1. A Phillips Head Screwdriver 2. A Fault Head Screwdriiver 3. An Allen Head Scewdriver
  • 1. A Flat Head Screwdriver 2. A Phillips Head Screwdriver 3. A Star Head Screwdriver
  • 1. A Single Slot Screwdriver 2. A Plus Head Screwdriver 3. A Multi Slot Screwdriver

Question 13

Question
What is wrong with how the man in this image is dressed for the shop? (Check all that apply)
Answer
  • Not wearing some form of eye protection
  • Wearing jewelry
  • Hair is too long and not tucked into collar, in a bun, or under a hat
  • Does not have long sleeves pushed up around his elbows
  • Has on a work apron
  • Does not have ear protection
  • Loose clothing is not tucked in

Question 14

Question
What is wrong with how the man in this image is dressed for the shop? (Check all that apply)
Answer
  • Not wearing safety glasses
  • Wearing Jewelry
  • Long sleeves not pushed up around his elbows
  • Loose clothing not tucked in
  • long hair not tucked into collar, up in a bun, or under a hat
  • Not wearing ear protection to reduce the effect of loud noises

Question 15

Question
This saw is being operated correctly.
Answer
  • True
  • False

Question 16

Question
Select any of the saws below that could accurately and safely make the beveled cut in the picture.

Question 17

Question
The blade in the picture can be used with a table saw, a [blank_start]circular saw[blank_end] or a [blank_start]miter saw.[blank_end]
Answer
  • circular saw
  • miter saw

Question 18

Question
What reason might the two blades in the picture have for having different amounts of teeth that are also different sizes.
Answer
  • less/bigger teeth cuts slower, more/shorter teeth cuts faster
  • less/shorter teeth makes a smoother cut, more/bigger teeth makes a rougher cut
  • less/shorter teeth makes a curved cut, more/bigger teeth makes a strait cut
  • more/shorter teeth is better for cutting metal, less/bigger teeth is better for cuting wood

Question 19

Question
This saw is being operated correctly.
Answer
  • True
  • False

Question 20

Question
A drill press can drill holes at a consistent depth and at a consistent 45 degree angle.
Answer
  • True
  • False
Show full summary Hide full summary

Similar

ExamTime Quick Guide to Getting Started
Andrea Leyden
GoConqr Quick Guide to Getting Started
Andrea Leyden
GoConqr Getting Started Guide
Norman McBrien
FREE WEB 2.0 TOOLS
Wan Zuhainis Saad
GoConqr Getting Started Guide
Dualta Moore
GoConqr Quick Guide to Getting Started_1
Andrea Leyden
pixlr quiz 2
Samuel Melendez
GoConqr Getting Started Guide_2
Andrea Leyden
Identify common tools and equipment
T Andrews
TOOLS AND INSTRUMENTS
Ivonne Montes De Oca Ospina