20250494
Beschreibung
Quiz von Connor Sheffield , aktualisiert more than 1 year ago
|
Erstellt von Connor Sheffield
vor mehr als 4 Jahre
|
|
Frage 1
Frage
The height of the section of step flashing that is applied against a vertical side surface (wall or chimney) must be at least 2” high, but for additional protection, use step flashing with a greater height.
Antworten
- True
- False
Frage 2
Frage
It’s okay to fasten the step flashing to cap flashing
Antworten
- True
- False
Frage 3
Frage
The base flashing used against a vertical front wall must:
Antworten
-
Be a continuous piece of metal up to 10’ in length.
-
Be embedded in asphalt plastic cement.
-
Extend up the wall at least 2”.
-
All of the above.
Frage 4
Frage
A cricket:
Antworten
-
Projects through the roof and should be handled like a round vent pipe.
-
Helps to prevent a build-up of ice and snow at the uppermost side of the chimney.
-
Is put in position after the underlayment has be applied.
-
Is fastened to the deck with asphalt plastic cement.
Frage 5
Frage
Cap Flashing, continuous counter flashing and surface mounted counter flashing are three flashing methods used on chimneys.
Antworten
- True
- False
Frage 6
Frage
Base flashing is required at the point where a dormer meets a sloping roof.
Antworten
- True
- False
Frage 7
Frage
When installing a closed-cut valley, first lay the shingles from the roof with lesser area across the valley and on to the adjoining roof area at least 24 inches.
Antworten
- True
- False
Frage 8
Frage
Generally, the valley method preferred by Certainteed is the closed-cut method.
Antworten
- True
- False
Frage 9
Frage
Open valleys are recommended for Grand Manor, Carriage House, Landmark TL, Presidential Shake, and Presidential TL.
Antworten
- True
- False
Frage 10
Frage
The alternate closed valley application is recommended for 3 tab shingles.
Antworten
- True
- False
Frage 11
Frage
Flashing a skylight curb requires apron flashing on the base, step flashing on the sides, base flashing on the upslope side, and a kick-out diverter.
Antworten
- True
- False
Frage 12
Frage
Hemmed edges on flashing that are turned upward create air gaps that resist the movement of moisture from the metal to the roofing.
Antworten
- True
- False
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.