Zusammenfassung der Ressource
Frage 1
Frage
ST analysis can be performed on the patient with 1:1 ventricular pacing.
Frage 2
Antworten
-
Normally elevated in all leads
-
Normally isoelectric in all leads
-
Normally depressed in all leads
-
Damaged and ischemia causes the cells of the myocardium to become more or less excitable.
Frage 3
Frage
ST segment measurements are displayed and trended in:
Frage 4
Frage
The ST Leads that are being monitored depend on: (choose all that apply)
Antworten
-
The leads available based on the lead set used and electrodes applied.
-
The Lead Placement selected - Standard or EASI
-
The number of leads displayed on the Main Screen.
-
The leads setup for monitoring.
Frage 5
Frage
When ST Analysis is turned off:
Frage 6
Frage
To turn off individual leads of ST:
Antworten
-
Change to another screen
-
In the ST Analysis menu, select Setup ST Leads.
-
In the ECG menu, select New Lead Setup.
-
In the ST Analysis menu, select, select ST Analysis.
Frage 7
Frage
Selecting Alarms in the ST Analysis menu:
Antworten
-
Turns on/off all ST alarms.
-
Allows you turn off individual ST alarms.
-
Silences ST alarms for 5 minutes.
-
Allows you to select single-lead or multi-lead alarms.
Frage 8
Frage
Multi-lead alarms will cause an alarm only when:
Antworten
-
All monitored ST leads exceed the limits set for 15 seconds.
-
Three or more leads exceed the limits set for 15 seconds.
-
Two or more leads exceed the limits set for 1 minute.
-
Three or more leads exceed the limits set for 1 minute.
Frage 9
Frage
ST alarms set using Auto Limits Wide: (choose all that apply)
Antworten
-
Changes the alarm limits based on the last 5 minutes of data.
-
Change as the patient’s condition changes
-
Changes the alarm limits based on the last 1 minute of data.
-
Will not change until you change them manually or use AutoLimits again.
-
Will not set alarm limits in pathological range.