Zusammenfassung der Ressource
Frage 1
Frage
PIM-SM uses a mechanism called ______ to test that the source IP address of a stream received on a port would be accessed in unicast back on the same port.
Antworten
-
Reverse Path Forwarding
-
High speed configuration
-
Packet tracing
-
R.B.T
Frage 2
Frage
An audio stream is being served by Multicast, hosts that correctly connect to the stream are fed it via ________ transport layer protocol.
Frage 3
Frage
The host uses [igmp] to join a multicast stream, and routers use [pim] to learn about available streams from upstream multicast routers.
Antworten
-
Internet Group Management Protocol & Protocol Independent Multicast
-
Internet Group Management Protocol & Personal information manager
-
Internet Group Management Protocol & Product Information Management
Frage 4
Frage
The [pim-sm] multicast routing protocol is the most suitable protocol for routing multicast over Wide Area Networks (WAN).
Antworten
-
Protocol-Independent Multicast Sparse Mode
-
Its a type it in answer, so make sure you know how to spell it!
Frage 5
Frage
Switches can be aware of multicast streams and behave accordingly if they are configured to use either ________ or _________.
Frage 6
Frage
Routers that have ports configured for ip pim sparse-dense-mode will randomly select PIM-SM or PIM-DM means of routing multicast.
Frage 7
Frage
What is the first [first_ip_addr] and last [last_ip_addr] IP address in the Multicast range of IPv4 addresses ?
Antworten
-
224.0.0.0
-
239.255.255.255
-
224.0.0.5
-
224.255.255.255
Frage 8
Frage
When a router sends an IGMP Query on the LAN to the hosts, it sends it using [ip] address.
Antworten
-
224.0.0.1
-
224.255.255.254
-
224.0.0.2
-
223.0.0.254
Frage 9
Frage
A Rendezvous Point (RV point) is required for which of the following Multicast routing protocols ?
Antworten
-
PIM-DIM
-
DVMPR
-
PIM-SM
-
MOSPF
-
Both PIM-DM and PIM-SM
Frage 10
Frage
Match the milticast addresses to their function.
Antworten
-
All Systems on the Subnet : 224.0.0.1
-
All OSPF Routers : 224.0.0.5
-
All PIM Routers : 224.0.0.13
-
All OSPF Designated Routers : 224.0.0.6
-
Al Routers on the subnet : 224.0.0.2