Frage 1
Frage
A BS3036 protective device is a
Antworten
-
Rewireable fuse
-
Cartridge fuse
-
Type B MCB
-
Type C MCB
Frage 2
Frage
A cable has resistance of 0.12 ohms and a current of 30A. The volt drop due to resistance is
Frage 3
Frage
A circuit supplying kitchen appliances would be identified as
Antworten
-
Heating
-
Cooker
-
Lighting
-
Power
Frage 4
Frage
A circuit to supply hot water would be identified as
Frage 5
Frage
A common method of providing protection by fault protection
Frage 6
Frage
A method of protection against electric shock is provided in a cable by
Frage 7
Frage
A work plan for new installations provides:
Frage 8
Frage
A requirement for safety that all installations should have is
Frage 9
Frage
A short circuit occurs
Antworten
-
Between two conductors on the same phase
-
Between two conductors at different potential
-
Between two conductors at the same potential
-
In a circuit that is electrically sound
Frage 10
Frage
A single pole switch breaks
Frage 11
Frage
A typical system application for fibre optic cable is:
Antworten
-
Fire alarms
-
Data communications
-
Emergency management
-
Environmental control
Frage 12
Frage
A voltage of 400kV represents the following voltage
Antworten
-
0.4V
-
40000V
-
0.04V
-
400000V
Frage 13
Frage
Aluminium may be used as a conductor in preference to copper as it is
Antworten
-
Less likely to corrode
-
Is lighter
-
Is easier to terminate
-
Is a better conductor
Frage 14
Frage
Aluminium spiral fixings are used to fix items on
Antworten
-
Concrete
-
Brick
-
Roof tiles
-
Plaster board
Frage 15
Frage
An Earthing system that uses a separate conductor as a return path for any fault current is called
Frage 16
Frage
An example of overload is
Antworten
-
A 13 amp socket outlet with a 100W lamp connected
-
A 13amp socket outlet with a 2kW fire connected to it
-
A lighting circuit with a 100W lamp connected
-
A lighting circuit with a 2 kW heater connected
Frage 17
Frage
An RCD is a device used to protect circuits against
Frage 18
Frage
Automatic disconnection of supply and special locations are found in
Frage 19
Frage
Best location for a solar panel
Antworten
-
On the roof of a building facing north
-
On the side of a chimney
-
On the shaded part of the roof
-
On the roof of a building facing south
Frage 20
Antworten
-
Cannot be tampered with
-
Are accurate at determining overload current
-
Will not cause damage in the event of severe short circuit
-
Have a re-wireable element
Frage 21
Frage
Circuit breakers are frequently installed in preference to fuses because
Antworten
-
They are adjustable
-
They do not need replacing after operation
-
They are less sensitive to some types of fault
-
They are cheaper than fuses
Frage 22
Frage
Circuit breakers use two forms of operation
Frage 23
Frage
Define the term for a Circuit Protective Conductor (CPC)
Antworten
-
A cable that links all extraneous conductive parts backs to the MET
-
It is the cable that connects from the MET to the star point of the sub station
-
It relates to the types of dangerous gases that are released into the atmosphere
-
A cable that links all exposed conductive parts back to the MET
Frage 24
Frage
Determine the size of conduit required for a run of 2.7m, if you are installing 3 x 1.5mm² and 6 x 6mm² conductors (all stranded).
Frage 25
Frage
Determine the size of conduit required for a run of 2.9m, if you are installing 9 x 2.5mm² and 3 x 6mm² conductors (all stranded).
Frage 26
Frage
Equipment identified in BS 7671 by an EN number must comply with the relevant requirements of:
Antworten
-
Extra neutral provision
-
European standards
-
Economic standards
-
English standards
Frage 27
Frage
ES lamp holders, the outer casing must be connected to
Antworten
-
Neutral conductor
-
Line conductor
-
Earth conductor
-
All conductors
Frage 28
Frage
Excess current, flowing in a circuit which is electrically sound, is defined as
Antworten
-
Short-circuit current
-
Earth fault current
-
Open-circuit current
-
Overload current
Frage 29
Frage
From BS 7671 the disconnection time for circuits supplying equipment and circuits up to 32A is :
Frage 30
Frage
What does Ze represent from the following formula Zs = Ze + (R1 + R2)?
Antworten
-
Internal Earth Fault Loop Impedance
-
Resistance of the circuit protective conductor
-
External Earth Fault Loop Impedance
-
Resistance of the line conductor
Frage 31
Frage
What does R1 represent from the following formula Zs = Ze + (R1 + R2)?
Antworten
-
Design Current
-
Resistance of the circuit protective conductor
-
Resistance of the line conductor
-
External Earth Fault Loop Impedance
Frage 32
Frage
From the On-site-Guide the maximum external earth loop impedance for a TN-C-S system is?
Antworten
-
0.08 ohms
-
0.8 ohms
-
0.85 ohms
-
0.35 ohms
Frage 33
Frage
From the On-site-Guide the maximum external earth loop impedance for a TN-S system is?
Antworten
-
0.8 ohms
-
0.75 ohms
-
0.35 ohms
-
0.08 ohms
Frage 34
Frage
Holes between joists must be of a minimum distance from top or bottom fixing surface of
Frage 35
Frage
Identify the distribution voltage for a large story building with a private transformer
Frage 36
Frage
IET Wiring regulations give directives on electrical installations in hazardous environments, however the statutory governing these situations are covered in the:
Antworten
-
British Standards
-
Electricity at Work Regulations 1989
-
Approved Codes of Practice
-
Health & Safety at Work Act 1974
Frage 37
Frage
IET Wiring regulations apply particularly to:
Frage 38
Frage
IET Wiring regulations recommend inspection of temporary construction site installation every:
Antworten
-
1 month
-
3 months
-
12 months
-
24 months
Frage 39
Frage
If a 20mm steel conduit was to be installed horizontally what would be the maximum spacing of supports
Frage 40
Frage
If a 30A fuse has a tripping characteristic of 5 x In, what would be the instantaneous tripping current?