3677607
Frage 1
Frage
Q. 201: The inputs for developing a test plan are taken from
Antworten
-
A. Project plan
-
B. Business plan
-
C. Support plan
-
D. None of the above
Frage 2
Frage
Q. 202: To test a function, the programmer has to write a ______, which calls the
function and passes it the test data.
Antworten
-
A. Stub
-
B. Driver
-
C. Proxy
-
D. None of the above
Frage 3
Frage
Q. 203: Which of the following is not a static testing technique
Antworten
-
A. Error guessing
-
B. Walkthrough
-
C. Data flow analysis
-
D. Inspections
Frage 4
Frage
Q. 204: Which of the following statements about component testing is not true?
Antworten
-
A. Component testing should be performed by development
-
B. Component testing is also know as isolation or module testing
-
C. Component testing should have completion criteria planned
-
D. Component testing does not involve regression testing
Frage 5
Frage
Q. 205: Inspections can find all the following except
Antworten
-
A. Variables not defined in the code
-
B. Spelling and grammar faults in the documents
-
C. Requirements that have been omitted from the design documents
-
D. How much of the code has been covered
Frage 6
Frage
Q. 206: Which of the following is not a characteristic for Testability?
Antworten
-
A. Operability
-
B. Observability
-
C. Simplicity
-
D. Robustness
Frage 7
Frage
Q. 207: Software testing accounts to what percent of software development costs?
Antworten
-
A. 10-20
-
B. 40-50
-
C. 70-80
-
D. 5-10
Frage 8
Frage
Q. 208: Equivalence partitioning is:
Antworten
-
A. A black box testing technique used only by developers
-
B. A black box testing technique than can only be used during system testing
-
C. A black box testing technique appropriate to all levels of testing
-
D. A white box testing technique appropriate for component testing
Frage 9
Frage
Q. 209: If an expected result is not specified then:
Antworten
-
A. We cannot run the test
-
B. It may be difficult to repeat the test
-
C. It may be difficult to determine if the test has passed or failed
-
D. We cannot automate the user inputs
Frage 10
Frage
Q. 210: How much testing is enough
Antworten
-
A. This question is impossible to answer
-
B. The answer depends on the risks for your industry, contract and special requirements
-
C. The answer depends on the maturity of your developers
-
D. The answer should be standardized for the software development industry
Frage 11
Frage
Q. 211: The purpose of requirement phase is
Antworten
-
A. To freeze requirements
-
B. To understand user needs
-
C. To define the scope of testing
-
D. All of the above
Frage 12
Frage
Q. 212: Which of these can be successfully tested using Loop Testing methodology?
Antworten
-
A. Simple Loops
-
B. Nested Loops
-
C. Concatenated Loops
-
D. All of the above
Frage 13
Frage
Q. 213: Cyclomatic Complexity method comes under which testing method.
Antworten
-
A. White box
-
B. Black box
-
C. Green box
-
D. Yellow box
Frage 14
Frage
Q. 214: A reliable system will be one that:
Antworten
-
A. Is unlikely to be completed on schedule
-
B. Is unlikely to cause a failure
-
C. Is likely to be fault-free
-
D. Is likely to be liked by the users
Frage 15
Frage
Q. 215: Which, in general, is the least required skill of a good tester?
Antworten
-
A. Being diplomatic
-
B. Able to write software
-
C. Having good attention to detail
-
D. Able to be relied on
Frage 16
Frage
Q. 216: A regression test:
Antworten
-
A. Will always be automated
-
B. Will help ensure unchanged areas of the software have not been affected
-
C. Will help ensure changed areas of the software have not been affected
-
D. Can only be run during user acceptance testing
Frage 17
Frage
Q. 217: Function/Test matrix is a type of
Antworten
-
A. Interim Test report
-
B. Final test report
-
C. Project status report
-
D. Management report
Frage 18
Frage
Q. 218: The process starting with the terminal modules is called:
Antworten
-
A. Top-down integration
-
B. Bottom-up integration
-
C. None of the above
-
D. Module integration
Frage 19
Frage
Q. 219: Verification is:
Antworten
-
A. Checking that we are building the right system
-
B. Checking that we are building the system right
-
C. Performed by an independent test team
-
D. Making sure that it is what the user really wants
Frage 20
Frage
Q. 220: The difference between re-testing and regression testing is
Antworten
-
A. Re-testing is running a test again; regression testing looks for unexpected side effects
-
B. Re-testing looks for unexpected side effects; regression testing is repeating those tests
-
C. Re-testing is done after faults are fixed; regression testing is done earlier
-
D. Re-testing uses different environments, regression testing uses the same environment
-
E. Re-testing is done by developers, regression testing is done by independent testers
Frage 21
Frage
Q. 221: Testing should be stopped when:
Antworten
-
A. All the planned tests have been run
-
B. Time has run out
-
C. All faults have been fixed correctly
-
D. Both A. and C.
-
E. I depends on the risks for the system being tested
Frage 22
Frage
Q. 222: Which of the following is the main purpose of the integration strategy for
integration testing in the small?
Antworten
-
A. To ensure that all of the small modules are tested adequately
-
B. To ensure that the system interfaces to other systems and networks
-
C. To specify which modules to combine when and how many at once
-
D. To ensure that the integration testing can be performed by a small team
-
E. To specify how the software should be divided into modules
Frage 23
Frage
Q. 223: Which of the following is NOT part of configuration management:
Antworten
-
A. Status accounting of configuration items
-
B. Auditing conformance to ISO9001
-
C. Identification of test versions
-
D. Record of changes to documentation over time
-
E. controlled library access
Frage 24
Frage
Q. 224:Regression testing should be performed:
v) Every week
w) After the software has changed
x) As often as possible
y) When the environment has changed
z) Wwhen the project manager says
Antworten
-
A. v & w are true, x – z are false
-
B. w, x & y are true, v & z are false
-
C. w & y are true, v, x & z are false
-
D. w is true, v, x y and z are false
-
E. All of the above are true
Frage 25
Frage
Q. 225: A tool that supports traceability, recording of incidents or scheduling of tests is
called:
Antworten
-
A. A dynamic analysis tool
-
B. A test execution tool
-
C. A debugging tool
-
D. A test management tool
-
E. A configuration management tool
Frage 26
Frage
Q. 226: The cost of fixing a fault:
Antworten
-
A. Is not important
-
B. Increases as we move the product towards live use
-
C. Decreases as we move the product towards live use
-
D. Is more expensive if found in requirements than functional design
-
E. Can never be determined
Frage 27
Frage
Q. 227: Order numbers on a stock control system can range between 10000 and 99999
inclusive. Which of the following inputs might be a result of designing tests for only
valid equivalence classes and valid boundaries:
Antworten
-
A. 1000, 5000, 99999
-
B. 9999, 50000, 100000
-
C. 10000, 50000, 99999
-
D. 10000, 99999
-
E. 9999, 10000, 50000, 99999, 10000
Frage 28
Frage
Q. 228: When what is visible to end-users is a deviation from the specific or expected
behavior, this is called:
Antworten
-
A. An error
-
B. A fault
-
C. A failure
-
D. A defect
-
E. A mistake
Frage 29
Frage
Q. 229: Which expression best matches the following characteristics or review
processes:
1. Led by author
2. Undocumented
3. No management participation
4. Led by a trained moderator or leader
5. Uses entry exit criteria
s) Inspection
t) Peer review
u) Informal review
v) Walkthrough
Antworten
-
A. s = 4, t = 3, u = 2 and 5, v = 1
-
B. s = 4 and 5, t = 3, u = 2, v = 1
-
C. s = 1 and 5, t = 3, u = 2, v = 4
-
D. s = 5, t = 4, u = 3, v = 1 and 2
-
E. s = 4 and 5, t = 1, u = 2, v = 3
Frage 30
Frage
Q. 230: Given the following:
Switch PC on
Start "outlook"
IF outlook appears THEN
Send an email
Close outlook
Antworten
-
A. 1 test for statement coverage, 1 for branch coverage
-
B. 1 test for statement coverage, 2 for branch coverage
-
C. 1 test for statement coverage. 3 for branch coverage
-
D. 2 tests for statement coverage, 2 for branch coverage
-
E. 2 tests for statement coverage, 3 for branch coverage
Frage 31
Frage
Q. 231: Test managers should not:
Antworten
-
A. Report on deviations from the project plan
-
B. Sign the system off for release
-
C. Re-allocate resource to meet original plans
-
D. Rise incidents on faults that they have found
-
E. Provide information for risk analysis and quality improvement
Frage 32
Frage
Q. 232: Which of the following is NOT part of system testing:
Antworten
-
A. Business process-based testing
-
B. Performance, load and stress testing
-
C. Requirements-based testing
-
D. Usability testing
-
E. Top-down integration testing
Frage 33
Frage
Q. 233: When a new testing tool is purchased, it should be used first by:
Antworten
-
A. A small team to establish the best way to use the tool
-
B. Everyone who may eventually have some use for the tool
-
C. The independent testing team
-
D. The managers to see what projects it should be used in
-
E. The vendor contractor to write the initial scripts
Frage 34
Frage
Q. 234: Which of the following is not part of performance testing:
Antworten
-
A. Measuring response time
-
B. Measuring transaction rates
-
C. Recovery testing
-
D. Simulating many users
-
E. Generating many transactions
Frage 35
Frage
Q. 235: What is the purpose of test completion criteria in a test plan:
Antworten
-
A. To know when a specific test has finished its execution
-
B. To ensure that the test case specification is complete
-
C. To set the criteria used in generating test inputs
-
D. To know when test planning is complete
-
E. To plan when to stop testing
Frage 36
Frage
Q. 236: Given the following code, which is true:
IF A > B THEN
C = A – B
ELSE
C = A + B
ENDIF
Read D
IF C = D Then
Print "Error"
ENDIF
Antworten
-
A. 1 test for statement coverage, 3 for branch coverage
-
B. 2 tests for statement coverage, 2 for branch coverage
-
C. 2 tests for statement coverage. 3 for branch coverage
-
D. 3 tests for statement coverage, 3 for branch coverage
-
E. 3 tests for statement coverage, 2 for branch coverage
Frage 37
Frage
Q. 237: Unreachable code would best be found using:
Antworten
-
A. Code reviews
-
B. Code inspections
-
C. A coverage tool
-
D. A test management tool
-
E. A static analysis tool
Frage 38
Frage
Q. 238: What information need not be included in a test incident report:
Antworten
-
A. How to fix the fault
-
B. How to reproduce the fault
-
C. Test environment details
-
D. Severity, priority
-
E. The actual and expected outcomes
Frage 39
Frage
Q. 239: Which of the following is NOT included in the Test Plan document of the Test
Documentation Standard:
Antworten
-
A. Test items (i.e. software versions)
-
B. What is not to be tested
-
C. Test environments
-
D. Quality plans
-
E. Schedules and deadlines
Frage 40
Frage
Q. 240: IEEE 829 test plan documentation standard contains all of the following except:
Antworten
-
A. Test items
-
B. Test deliverables
-
C. Test tasks
-
D. Test environment
-
E. Test specification
Frage 41
Frage
Q. 251: Which of the following is NOT a black box technique:
Antworten
-
A. Equivalence partitioning
-
B. State transition testing
-
C. LCSAJ
-
D. Syntax testing
-
E. Boundary value analysis
Frage 42
Frage
Q. 252: Expected results are:
Antworten
-
A. Only important in system testing
-
B. Only used in component testing
-
C. Never specified in advance
-
D. Most useful when specified in advance
-
E. Derived from the code
Frage 43
Frage
Q. 253: Beta testing is:
Antworten
-
A. Performed by customers at their own site
-
B. Performed by customers at their software developer’s site
-
C. Performed by an independent test team
-
D. Useful to test bespoke software
Frage 44
Frage
Q. 254: Consider the following:
Pick up and read the newspaper
Look at what is on television
If there is a program that you are interested in watching then switch the the television on
and watch the program
Otherwise
Continue reading the newspaper
If there is a crossword in the newspaper then try and complete the crossword
Antworten
-
A. SC = 1 and DC = 1
-
B. SC = 1 and DC = 2
-
C. SC = 1 and DC = 3
-
D. SC = 2 and DC = 2
-
E. SC = 2 and DC = 3
Frage 45
Frage
Q. 255: A typical commercial test execution tool would be able to perform all of the
following EXCEPT:
Antworten
-
A. Generating expected outputs
-
B. Replaying inputs according to a programmed script
-
C. Comparison of expected outcomes with actual outcomes
-
D. Recording test inputs
-
E. Reading test values from a data file
Frage 46
Frage
Q. 256: Consider the following statements about early test design:
i. Early test design can prevent fault multiplication
ii. Faults found during early test design are more expensive to fix
iii. Early test design can find faults
iv. Early test design can cause changes to the requirements
v. Early test design takes more effort
Antworten
-
A. i, iii & iv are true. Ii & v are false
-
B. iii is true, I, ii, iv & v are false
-
C. iii & iv are true. i, ii & v are false
-
D. i, iii, iv & v are true, ii us false
-
E. i & iii are true, ii, iv & v are false
Frage 47
Frage
Q. 257: Given the following code, which is true about the minimum number of test
cases required for full statement and branch coverage:
Read P
Read Q
IF P+Q > 100 THEN
Print "Large"
ENDIF
If P > 50 THEN
Print "P Large"
ENDIF
Antworten
-
A. 1 test for statement coverage, 3 for branch coverage
-
B. 1 test for statement coverage, 2 for branch coverage
-
C. 1 test for statement coverage, 1 for branch coverage
-
D. 2 tests for statement coverage, 3 for branch coverage
-
E. 2 tests for statement coverage, 2 for branch coverage
Frage 48
Frage
Q. 258: The place to start if you want a (new) test tool is:
Antworten
-
A. Attend a tool exhibition
-
B. Invite a vendor to give a demo
-
C. Analyse your needs and requirements
-
D. Find out what your budget would be for the tool
-
E. Search the internet
Frage 49
Frage
Q. 259: Error guessing is best used
Antworten
-
A. As the first approach to deriving test cases
-
B. After more formal techniques have been applied
-
C. By inexperienced testers
-
D. After the system has gone live
-
E. Only by end users
Frage 50
Frage
Q. 260: Exit Criteria may consist of:
i. Thoroughness measures, such as coverage of code, functionality or risk
ii. Estimates of Defect density or reliability measures.
iii. Residual risk such as defects not fixed or lack of test coverage in certain areas
iv. Verifying the Test Environment.
Antworten
-
A. iv is correct and i,ii,iii are incorrect.
-
B. i,ii,iii is correct and iv is incorrect
-
C. ii is correct and i,ii,iii are incorrect
-
D. iii and iv are correct and i,ii are incorrect
Frage 51
Frage
Q. 261: One of the fields on a form contains a text box, which accepts alphabets in
lower or upper case. Identify the invalid Equivalance class value.
Antworten
-
A. CLASS
-
B. cLASS
-
C. CLass
-
D. CLa01ss
Frage 52
Frage
Q. 262: The Kick Off phase of a formal review includes the following:
Antworten
-
A. Explaining the objective
-
B. Fixing defects found typically done by author
-
C. Follow up
-
D. Individual Meeting preparations
Frage 53
Frage
Q. 263: Peer Reviews are also called as :
Antworten
-
A. Inspection
-
B. Walkthrough
-
C. Technical Review
-
D. Formal Review
Frage 54
Frage
Q. 264: Validation involves which of the following
i. Helps to check the Quality of the Built Product
ii. Helps to check that we have built the right product.
iii. Helps in developing the product
iv. Monitoring tool wastage and obsoleteness.
Antworten
-
A. Options i,ii,iii,iv are true.
-
B. ii is true and i,iii,iv are false
-
C. i,ii,iii are true and iv is false
-
D. iii is true and i,ii,iv are false.
Frage 55
Frage
Q. 265: Success Factors for a review include:
i. Each Review does not have a predefined objective
ii. Defects found are welcomed and expressed objectively
iii. Management supports a good review process.
iv. There is an emphasis on learning and process improvement.
Antworten
-
A. ii,iii,iv are correct and i is incorrect
-
B. iii , i , iv is correct and ii is incorrect
-
C. i , iii , iv , ii is in correct
-
D. ii is correct
Frage 56
Frage
Q. 266: Which of the following helps in monitoring the Test Progress:
i. Percentage of Test Case Execution
ii. Percentage of work done in test environment preparation.
iii. Defect Information e.g. defect density, defects found and fixed
iv. The size of the testing Team and skills of the engineers
Antworten
-
A. iv is correct and i,ii,iii are incorrect
-
B. i,ii,iii are correct and iv is incorrect
-
C. i,ii are correct and iii,iv are incorrect
-
D. i,iv are correct and ii , iii are incorrect
Frage 57
Frage
Q. 267: Defects discovered by static analysis tools include:
i. Variables that are never used.
ii. Security vulnerabilities.
iii. Programming Standard Violations
iv. Uncalled functions and procedures
Antworten
-
A. i , ii,iii,iv is correct
-
B. iii ,is correct I,ii,iv are incorrect.
-
C. i ,ii, iii and iv are incorrect
-
D. iv, ii is correct
Frage 58
Frage
Q. 268: Which of the following is true about White and Black Box Testing Technique:-
Antworten
-
A. Equivalence partitioning, Decision Table and Control flow are White box Testing Techniques.
-
B. Equivalence partitioning, Boundary Value Analysis , Data Flow are Black Box Testing Techniques.
-
C. Equivalence partitioning , State Transition , Use Case Testing are black box Testing Techniques.
-
D. Equivalence Partitioning, State Transition, Use Case Testing and Decision Table are White Box Testing Techniques.
Frage 59
Frage
Q. 269: Which of the following techniques is NOT a black box technique?
Antworten
-
A. State transition testing
-
B. LCSAJ (Linear Code Sequence and Jump)
-
C. Syntax testing
-
D. Boundary value analysis
Frage 60
Frage
Q. 270: Features of White Box Testing Technique:
i. We use explicit knowledge of the internal workings of the item being tested to select the
test data.
ii. Uses specific knowledge of programming code to examine outputs and assumes that the
tester knows the path of logic in a unit or a program.
iii. Checking for the performance of the application
iv. Also checks for functionality.
Antworten
-
A. i, ii are true and iii and iv are false
-
B. iii is true and i,ii, iv are false
-
C. ii ,iii is true and i,iv is false
-
D. iii and iv are true and i,ii are false
Frage 61
Frage
Q. 271. The Provision and Management of a controlled library containing all the
configurations items is called as
Antworten
-
A. Configuration Control
-
B. Status Accounting
-
C. Configuration Identification
-
D. Configuration Identification
Frage 62
Frage
Q. 272: The selection of a test approach should consider the context:
i. Risk of Failure of the Project, hazards to the product and risks of product failure to
humans
ii. Skills and experience of the people in the proposed technique, tools and methods
iii. The objective of the testing endeavor and the mission of the testing team.
iv. The size of the testing Team
Antworten
-
A. i,ii,iii,iv are true
-
B. i,ii,iii are true and iv is false.
-
C. ii,iii,iv are true and i is false.
-
D. i,iv are true and ii, iii are false.
Frage 63
Frage
Q. 273: Benefits of Independent Testing
Antworten
-
A. Independent testers are much more qualified than Developers
-
B. Independent testers see other and different defects and are unbiased.
-
C. Independent Testers cannot identify defects.
-
D. Independent Testers can test better than developers
Frage 64
Frage
Q. 274: Minimum Test Required for Statement Coverage:
Disc = 0
Order-qty = 0
Read Order-qty
If Order-qty >=20 then
Disc = 0.05
If Order-qty >=100 then
Disc =0.1
End if
End if
Antworten
-
A. Statement coverage is 4
-
B. Statement coverage is 1
-
C. Statement coverage is 3
-
D. Statement Coverage is 2
Frage 65
Frage
Q. 275: Test Conditions are derived from:
Antworten
-
A. Specifications
-
B. Test Cases
-
C. Test Data
-
D. Test Design
Frage 66
Frage
Q. 276: Which of the following is the task of a Test Lead / Leader.
i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the
project.
ii. Write Test Summary Reports based on the information gathered during testing
iii. Decide what should be automated , to what degree and how.
iv. Create the Test Specifications
Antworten
-
A. i, ii, iii is true and iv is false
-
B. ii,iii,iv is true and i is false
-
C. i is true and ii,iii,iv are false
-
D. iii and iv is correct and i and ii are incorrect
Frage 67
Frage
Q. 277: Impact Analysis helps to decide:
Antworten
-
A. How much regression testing should be done.
-
B. Exit Criteria
-
C. How many more test cases need to written.
-
D. Different Tools to perform Regression Testing
Frage 68
Frage
Q. 278: Drivers are also known as:
i. Spade
ii. Test harness
iii. Scaffolding
Antworten
-
A. i , ii are true and iii is false
-
B. i , iii are true and ii is false
-
C. ii , iii are true and i is false
-
D. All of the above are true
Frage 69
Frage
Q. 279: Which of the following is not a type of incremental testing approach?
Antworten
-
A. Top down
-
B. Big-bang
-
C. Bottom up
-
D. Functional incrementation.
Frage 70
Frage
Q. 280: In a system designed to work out the tax to be paid:
An employee has £4000 of salary tax free. The next £1500 is taxed at 10% The next £28000
is taxed at 22% Any further amount is taxed at 40% Which of these groups of numbers would
fall into the same equivalence class?
Antworten
-
A. £4800; £14000; £28000
-
B. £5200; £5500; £28000
-
C. £28001; £32000; £35000
-
D. £5800; £28000; £32000
Frage 71
Frage
Q. 281: In case of Large Systems :
Antworten
-
A. Only few tests should be run
-
B. Testing should be on the basis of Risk
-
C. Only Good Test Cases should be executed.
-
D. Test Cases written by good test engineers should be executed.
Frage 72
Frage
Q. 282: What is the expected result for each of the following test cases?
A. Citibank card member, holding a Silver room
B. Non Citibank-member, holding a Platinum room
Antworten
-
A. A – Don’t offer any upgrade, B – Don’t offer any upgrade.
-
B. A – Don’t offer any upgrade, B – Offer upgrade to Gold.
-
C. A – Offer upgrade to Silver, B – Offer upgrade to Silver.
-
D. A – Offer upgrade to Gold, B – Don’t offer any upgrade.
Frage 73
Frage
Q. 283: Which of the following is not phase of the Fundamental Test Process?
Antworten
-
A. Test Planning and Control
-
B. Test implementation and Execution
-
C. Requirement Analysis
-
D. Evaluating Exit criteria and reporting
Frage 74
Frage
Q. 284: The structure of an incident report is covered in the Standard for Software Test
Documentation IEEE 829 and is called as:
Antworten
-
A. Anomaly Report
-
B. Defect Report
-
C. Test Defect Report
-
D. Test Incident Report
Frage 75
Frage
Q. 285: Repeated Testing of an already tested program, after modification, to discover
any defects introduced or uncovered as a result of the changes in the software being
tested or in another related or unrelated software component:
Antworten
-
A. Re Testing
-
B. Confirmation Testing
-
C. Regression Testing
-
D. Negative Testing
Frage 76
Frage
Q. 286: Consider the following state transition diagram of a switch. Which of the
following represents an invalid state transition?
Antworten
-
A. OFF to ON
-
B. ON to OFF
-
C. FAULT to ON
Frage 77
Frage
Q. 287: We use the output of the requirement analysis, the requirement specification
as the input for writing:
Antworten
-
A. User Acceptance Test Cases
-
B. Integration Level Test Cases
-
C. Unit Level Test Cases
-
D. Program specifications
Frage 78
Frage
Q. 288: Regression testing should be performed:
i. Every week
ii. After the software has changed
iii. As often as possible
iv. When the environment has changed
v. When the project manager says
Antworten
-
A. i & ii are true, iii, iv & v are false
-
B. ii, iii & iv are true, i & v are false
-
C. ii & iv are true, i, iii & v are false
-
D. ii is true, i, iii, iv & v are false
Frage 79
Frage
Q. 289: Evaluating testability of the requirements and system are a part of which
phase:-
Antworten
-
A. Test Analysis and Design
-
B. Test Planning and control
-
C. Test Implementation and execution
-
D. Evaluating exit criteria and reporting
Frage 80
Frage
Q. 290: Which of the following has highest level of independence in which test cases
are:
Antworten
-
A. Designed by persons who write the software under test
-
B. Designed by a person from a different section
-
C. Designed by a person from a different organization
-
D. Designed by another person
Frage 81
Frage
Q. 291: Test planning has which of the following major tasks?
i. Determining the scope and risks, and identifying the objectives of testing.
ii. Determining the test approach (techniques,test items, coverage, identifying and
interfacing the teams involved in testing , testware)
iii. Reviewing the Test Basis (such as requirements,architecture,design,interface)
iv. Determining the exit criteria.
Antworten
-
A. i,ii,iv are true and iii is false
-
B. i,,iv are true and ii is false
-
C. i,ii are true and iii,iv are false
-
D. ii,iii,iv are true and i is false
Frage 82
Frage
Q. 292: Deciding How much testing is enough should take into account :-
i. Level of Risk including Technical and Business product and project risk
ii. Project constraints such as time and budget
iii. Size of Testing Team
iv. Size of the Development Team
Antworten
-
A. i,ii,iii are true and iv is false
-
B. i,,iv are true and ii is false
-
C. i,ii are true and iii,iv are false
-
D. ii,iii,iv are true and i is false
Frage 83
Frage
Q. 293: Which of the following will be the best definition for Testing:
Antworten
-
A. The goal / purpose of testing is to demonstrate that the program works.
-
B. The purpose of testing is to demonstrate that the program is defect free.
-
C. The purpose of testing is to demonstrate that the program does what it is supposed to do.
-
D. Testing is executing Software for the purpose of finding defects.
Frage 84
Frage
Q. 294: Minimum Tests Required for Statement Coverage and Branch Coverage:
Read P
Read Q
If p+q > 100 then
Print "Large"
End if
If p > 50 then
Print "pLarge"
End if
Antworten
-
A. Statement coverage is 2, Branch Coverage is 2
-
B. Statement coverage is 3 and branch coverage is 2
-
C. Statement coverage is 1 and branch coverage is 2
-
D. Statement Coverage is 4 and Branch coverage is 2
Frage 85
Frage
Q. 295: Match every stage of the software Development Life cycle with the Testing Life
cycle:
i. Hi-level design a Unit tests
ii. Code b Acceptance tests
iii. Low-level design c System tests
iv. Business requirements d Integration tests
Antworten
-
A. i-d , ii-a , iii-c , iv-b
-
B. i-c , ii-d , iii-a , iv-b
-
C. i-b , ii-a , iii-d , iv-c
-
D. i-c , ii-a , iii-d , iv-b
Frage 86
Frage
Q. 296: Which of the following is a part of Test Closure Activities?
i. Checking which planned deliverables have been delivered
ii. Defect report analysis.
iii. Finalizing and archiving testware.
iv. Analyzing lessons.
Antworten
-
A. i , ii , iv are true and iii is false
-
B. i , ii , iii are true and iv is false
-
C. i , iii , iv are true and ii is false
-
D. All of above are true
Frage 87
Frage
Q. 297: Which of the following is NOT part of a high level test plan?
Antworten
-
A. Functions not to be tested.
-
B. Environmental requirements.
-
C. Analysis of Specifications.
-
D. Entry and Exit criteria.
Frage 88
Frage
Q. 298: If a candidate is given an exam of 40 questions, should get 25 marks to pass
(61%) and should get 80% for distinction, what is equivalence class.
Antworten
-
A. 23, 24, 25
-
B. 0, 12, 25
-
C. 30, 36, 39
-
D. 32,37,40
Frage 89
Frage
Q. 299: Which of the following statements is true of static analysis:
Antworten
-
A. Compiling code is not a form of static analysis.
-
B. Static analysis need not be performed before imperative code is executed.
-
C. Static analysis can find faults that are hard to find with dynamic testing.
-
D. Extensive statistic analysis will not be needed if white- Box testing is to be performed.
Frage 90
Frage
Q. 300: In a system designed to work out the tax to be paid: An employee has $4000 of
salary tax free. The next $1500 is taxed at 10% The next $28000 is taxed at 22% Any
further amount is taxed at 40%
Which of these groups of numbers would fall into the same equivalence class?
Antworten
-
A. $5800; $28000; $32000
-
B. $0; $200; $4200
-
C. $5200; $5500; $28000
-
D. $28001; $32000; $35000
Frage 91
Frage
Q. 301: Cost of the reviews will not include.
Antworten
-
A. Review process itself
-
B. Metrics analysis
-
C. Tool support.
-
D. Process improvement.
Frage 92
Frage
Q. 302: Regression testing always involves
Antworten
-
A. Testing whether a known software fault been fixed.
-
B. Executing a large number of different tests.
-
C. Testing whether modifications have introduced adverse side effects.
-
D. Using a test automation tool.
Frage 93
Frage
Q. 303: Capture and replay facilities are least likely to be used to _______
Antworten
-
A. Performance testing
-
B. Recovery testing
-
C. GUI testing
-
D. User requirements.
Frage 94
Frage
Q. 304: Which tool will be used to test the flag memory leaks and unassigned pointers
Antworten
-
A. Dynamic analysis tool
-
B. Static Analysis tool.
-
C. Maintenance tool.
-
D. Configuration tool.
Frage 95
Frage
Q. 305: Cyclomatic complexity is used to calculate
Antworten
-
A. Number of independent paths in the basis set of a program
-
B. Number of binary decisions + 1
-
C. Number bound for the number of tests that must be conducted to ensure that all statements have been executed at least once
-
D. Number of branches and decisions
Frage 96
Frage
Q. 306: Which of the following is not included in Test Plan.
Antworten
-
A. Features to be tested.
-
B. Environmental needs.
-
C. Suspension criteria.
-
D. Expected results.
Frage 97
Frage
Q. 307: Software quality is not relevant to _______
Antworten
-
A. Correctness
-
B. Usability
-
C. Viability
-
D. Reusability.
Frage 98
Frage
Q. 308: Match the following:
1. Test estimation
2. Test control
3. Test monitoring
a. Measures of tracking process
b. Effort required to perform activities
c. Reallocation of resources
Antworten
-
A. 1-b, 2-c, 3-a
-
B. 1-b, 2-a, 3-c
-
C. 1-c, 2-a, 3-b
-
D. 1-a, 2-b, 3-c
Frage 99
Frage
Q. 309: When do you stop testing?
Antworten
-
A. When the specified number of faults are found.
-
B. When the test completion criteria are met.
-
C. When all high and medium priority tests are complete.
-
D. When all statements have been executed
Frage 100
Frage
Q. 310: What is the smallest number of test cases required to Provide 100% branch
coverage?
If(x>y) x=x+1;
else y=y+1;
while(x>y)
{
y=x*y; x=x+1;
}
Antworten
-
A. 1
-
B. 2
-
C. 3
-
D. 4
Frage 101
Frage
Q. 311: Match the following.
1. Configuration identification
2. Configuration control
3. Status reporting
4. Configuration auditing
a. Maintains of CI’s in a library
b. Checks on the contents of the library
c. Function recording and tracking problems.
d. Requires the all CI’s and their versions in the system are known
Antworten
-
A. 1-d, 2-c, 3-d, 4-a.
-
B. 1-d, 2-a, 3-c, 4-b.
-
C. 1-a, 2-b, 3-d, 4-c.
-
D. 1-c, 2-b, 3-a, 4-d.
Frage 102
Frage
Q. 312: Integration testing in the large involves:
Antworten
-
A. Testing the system when combined with other systems.
-
B. Testing a sub-system using stubs and drivers.
-
C. Testing a system with a large number of users.
-
D. Combing software components and testing them in one go.
Frage 103
Frage
Q. 313: One of the following is not a part of white box testing as per BS7925-II
standards.
Antworten
-
A. Random testing
-
B. Data Flow testing.
-
C. Statement testing.
-
D. Syntax testing.
Frage 104
Frage
Q. 314: A piece of software has been given _______what tests in the Following will you
perform?
1) Test the areas most critical to business processes
2) Test the areas where faults will be maximum
3) Test the easiest functionalities
Antworten
-
A. 1&2 are true and 3 is false.
-
B. 1,2&3 are true.
-
C. 1 is true, 2&3 are false.
-
D. 1&2 are false, 3 is true
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.