Frage 1
Frage
What can be done to modify the car remotely using telemetry?
Antworten
-
You can stop the car.
-
You can make adjustments to the engine control unit (ECU).
-
You can't do anything, just acquired data.
Frage 2
Frage
Wich statements are true?
Antworten
-
In case of rain is forbidden to use telemetry because of the high voltages are needed.
-
The telemetry system is not necessary to shut down with the other electronic systems, it can always be turned on.
-
Telemetry is optional.
-
All are false
Frage 3
Frage
How many Master Switches must be in the vehicle?
Frage 4
Frage
The brake light itself has to have a black background and a rectangular shape.
Frage 5
Frage
Which is the international electrical symbol?
Antworten
-
Red spark on a white-edged blue triangle.
-
Red spark on a yellow-edged blue triangle.
-
Blue spark on a white-edged red square.
Frage 6
Frage
The primary master switch must:
Antworten
-
Be located on the (driver’s) left side of the vehicle, in proximity to the Front Hoop, at leg height and be easily actuated from outside the car.
-
Be located on the (driver’s) right side of the vehicle, in proximity to the Main Hoop, at shoulder height and be easily actuated from outside the car.
-
Be located on the (driver’s) right side of the vehicle, in proximity to the Front Hoop, at shoulder height and be easily actuated from outside the car.
Frage 7
Frage
The cockpit-mounted master switch must be located to provide easy actuation by the driver in an emergency or panic situation.
Frage 8
Frage
Which statement is true?
Antworten
-
The cockpit-mounted master switch must be of a rotary type and must be direct acting,
-
The cockpit-mounted master switch must be a push/pull Emergency switch.
-
The cockpit-mounted master switch shouldn't act through a relay.
Frage 9
Frage
How many hydraulics systems must have our car?
Antworten
-
1 circuit.
-
2 circuit.
-
4 circuit.
-
It’s indifferent.
Frage 10
Frage
Which is the maximum cc permitted?
Antworten
-
600 cc
-
610 cc
-
500 cc
-
1000 cc
Frage 11
Frage
Which kind of coolant fluid can we use?
Frage 12
Frage
Which is the maximum diameter permitted for the restrictor?
Frage 13
Frage
For the Design-Event the vehicle has to fulfills the following conditions:
Antworten
-
It has to be ready-to-run.
-
It only has to be fully assembled.
-
It has to be in finished condition.
-
All are true.
Frage 14
Frage
What signifies a BLUE FLAG during the FSAE Endurance Event?
Antworten
-
Your session has been completed. Exit the course at first opportunity.
-
Pull into the designated passing zone to be passed by a faster competition. Obey the corner workers hand signals at the end of the passing zone to merge into competition.
-
Pull into the penalty box for discussion with the Chief Marshall/Director of Operations or other official concerning an incident. A time penalty may be assessed for such incident.
-
Danger, SLOW DOWN, be prepared to take evasive action, something has happened beyond the flag station. NO PASSING unless directed by the corner workers.
Frage 15
Frage
Which is the minimum radius for the forward facing edges on the bodywork?
Frage 16
Frage
No part of any aerodynamic device can be: (Chose the false one)
Antworten
-
Further rearward than 350mm of the rearward of the rear of the rear tires.
-
Any part of the aerodynamic devices can be higher than 1,2m. from the ground.
-
Power ground effects are prohibited.
-
Aerodynamic devices can be configurable during the FSAE competition.
Frage 17
Frage
Which is the basic form of the chassis?
Antworten
-
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure and Templates.
-
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure, Front bulkhead, Front bulkhead support system and Templates.
-
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure, Front bulkhead, Front bulkhead support system.
Frage 18
Frage
How many templates are required and how are they held?
Frage 19
Frage
Where do you must locate bateries, master cylinders, hydraulics reservoirs (non-crushable objects)?
Frage 20
Frage
Which dimension must have impact atenuator?
Antworten
-
200 wide 100 high 200 long.
-
100 wide 100 high 200 long.
-
100 wide 200 high 200 long.
-
200 wide 100 high 100 long.
Frage 21
Frage
The distance between the front axle and the rear axle:
Antworten
-
Is called track and it must be at least 75% shorter than wheelbase.
-
Is called wheelbase and it must have at least 1525 mm.
-
Is called wheelbase and it must be a maximum of 1675 mm long.
-
B and C are both correct.
Frage 22
Frage
How vehicle rollover stability is evalued during the scrutineering?
Antworten
-
Measuring the width and height of the vehicle.
-
The vehicle has to take a 180º turn and 5 metres of radius to 50 km/h.
-
Using a tilt table.
-
A and C are both correct.
Frage 23
Frage
Which statement about suspension system is true? (only one)
Antworten
-
Suspension system is optional but recommended.
-
The usable wheel travel must be of at least 45,4 mm.
-
The bottom part of the chassis must be at least at 10 mm above the ground in a bump.
-
The usable wheel travel must be of at least 50,8 mm.
Frage 24
Frage
After the vehicle is approved to compete in the dynamic events:
Antworten
-
You can change the engine if it fails.
-
You can not replace the tires.
-
You can adjust the tire pressure.
-
You can replace damaged suspension wishbones.