for everyone quiz

Beschreibung

power engineering 3b2 Quiz am for everyone quiz, erstellt von TRAVIS CANNING am 28/02/2016.
TRAVIS CANNING
Quiz von TRAVIS CANNING, aktualisiert more than 1 year ago
TRAVIS CANNING
Erstellt von TRAVIS CANNING vor mehr als 8 Jahre
3
1

Zusammenfassung der Ressource

Frage 1

Frage
In an ammonia absorption system, the strong liquor is composed of which of the following?
Antworten
  • Ammonia and salt
  • Ammonia and brine
  • Water and ammonia
  • None of the above
  • All of the above

Frage 2

Frage
At a pressure of around 240 kpa, ammonia will boil off at a temperature of about___, in the evaporator by absorbing heat from the medium to be cooled?
Antworten
  • -89 degrees
  • -65 degrees
  • -15 degrees
  • 10 degrees
  • None of the above

Frage 3

Frage
An intercooler used in a compression refrigeration system serves to do which of the following?
Antworten
  • Reduce the vapor temperature
  • Increase vapor density
  • Permits a decrease in the power consumption of the high pressure compressor
  • All of the above
  • None of the above

Frage 4

Frage
Which of the following is incorporated between the discharge and suction of two separate single stage compressors in order to remove some of the heat added in the low pressure stage?
Antworten
  • Intercooler
  • Aftercooler
  • Evaporator
  • Condenser
  • None of the above

Frage 5

Frage
In order to handle large volumes of vapor coming from the evaporator, multi- stage plants may employ which of the following for the first of low pressure stage?
Antworten
  • Vaporization Compressor
  • Booster compressor
  • Variable speed compressor
  • All of the above
  • None of the above

Frage 6

Frage
Which of the following maintains a constant level of liquid refrigerant in the evaporator?
Antworten
  • Expansion valve
  • Liquid receiver
  • Evaporator float valve
  • None of the above
  • All of the above

Frage 7

Frage
The different types of refrigeration plants are which of the following?
Antworten
  • Constant Expansion system
  • Direct system
  • Indirect system
  • B and C
  • All of the above

Frage 8

Frage
In the duplex compressor system, the condenser for the first stage is the evaporator for the second stage?
Antworten
  • True
  • False

Frage 9

Frage
Which of the following are different types of construction for an evaporator?
Antworten
  • Bare tube
  • Finned Tube
  • Plate surface
  • 1 and 2
  • All of the above

Frage 10

Frage
Which of the following are major components of the high pressure ammonia refrigeration system?
Antworten
  • Compressor
  • Condenser
  • Evaporator
  • Liquid Receiver
  • All of the above

Frage 11

Frage
Some of the most common refrigerants used today are which of the following?
Antworten
  • Refrigerant R- 12
  • Refrigerant R- 22
  • Refrigerant R- 134a
  • Ammonia
  • All of the above

Frage 12

Frage
Which of the following properties should fluids, used as a refrigerant, possess?
Antworten
  • Non flammable
  • Non corrosive
  • Non toxic
  • Operate under low pressure (low boiling point)
  • All of the above

Frage 13

Frage
When starting up a compressor and a leak has been found, which of the following steps would be the corrective action?
Antworten
  • Shut down the compressor until the leak is repaired
  • Continue with the start up and ignore the leak
  • If possible, bypass the line which is leaking
  • All of the above
  • None of the above

Frage 14

Frage
What would be the final step in the start up of a compressor?
Antworten
  • Check the gearbox oil level
  • Slowly load up the compressor
  • Close the breaker for the compressor motor
  • Check for leaks and unusual noises
  • None of the above

Frage 15

Frage
Which of the following steps comes first when starting up a compressor that was taken down for maintenance?
Antworten
  • Start the compressor
  • Check oil levels
  • Ensure no one is working on the compressor
  • Turn on the cooling water for the compressor cylinders
  • Open the suction and discharge valves

Frage 16

Frage
Which of the following should never be placed in the line between compressor and receiver, unless a safety valve is used?
Antworten
  • Drain valve
  • Pressure regulator
  • Orifice plate
  • Shut off valve
  • None of the above

Frage 17

Frage
Air receivers serve to perform which of the following functions?
Antworten
  • Act as a reservoir in the compressed air system
  • Acts to dampen pulsations in the discharge pressure
  • Allows moisture, dust, and oil to settle out from the air
  • All of the above
  • None of the above

Frage 18

Frage
The standard desiccant used in an air dryer system is which of the following?
Antworten
  • Activated alumina
  • Silica gel
  • Potassium oxide
  • 1 and 2
  • None of the above

Frage 19

Frage
Which of the following are components of an air dryer system?
Antworten
  • Prefilters
  • Dryer tanks or towers
  • Afterfilters
  • All of the above
  • None of the above

Frage 20

Frage
Which of the following functions does the dry air receiver serve to do?
Antworten
  • Stabilizes the system pressure as it acts as a demand reservoir
  • Helps avoid overloading the air purification system with surges in air demand
  • Dampens out the dew point and temperature spikes
  • All of the above
  • None of the above

Frage 21

Frage
Which of the following functions does the wet air receiver serve to do?
Antworten
  • Stabilize flow though the air driers on system load changes
  • Additional moisture separation
  • Provides storage capacity to prevent rapid compressor cycling
  • All of the above
  • none of the above

Frage 22

Frage
What is the main purpose of an intercooler?
Antworten
  • To remove any entrained moisture
  • To reduce the volume of the air
  • To maintain the outlet temperature
  • All of the above
  • None of the above

Frage 23

Frage
Which of the following are some of the reasons for using intercoolers and aftercoolers to cool down the air?
Antworten
  • To condense out water vapor and drain from the system
  • To remove all oil vapors that will have detrimental effects on the system
  • Decrease the amount of power to compress the air
  • To make cylinder lubrication more effective
  • All of the above

Frage 24

Frage
Some common methods used to reduce “surging” would be?
Antworten
  • Throttling the inlet valve
  • Reducing the compressor speed
  • Venting of the discharge line to atmosphere, or to the suction line
  • All of the above
Zusammenfassung anzeigen Zusammenfassung ausblenden

ähnlicher Inhalt

Die Reformation (Karteikarten)
AntonS
IELTS-Vokabeln
anna.grillborzer0656
PuKW Step 6 Teil 2
Mona Les
Säure-Basen- Theorie
elham_riefaie
Top Tools für Zusammenarbeit im Web 2.0
Gaby K. Slezák
Testfragen Sozialpsychologie
Sven Christian
Machst du auch diese 10 typischen Fehler auf Deutsch?
Dilyana Hunley
Vetie Viro 2013
Laura Sieckmann
Vetie - Milch 2017
Kim Langner
Vetie Geflügelkrankheiten Fragebogen 3
Annika G