5134922
Beschreibung
Quiz von james crowley, aktualisiert more than 1 year ago
|
Erstellt von james crowley
vor mehr als 8 Jahre
|
|
Frage 1
Frage
Wet abrading is carried out on which type of ground coating?
Antworten
-
a Acrylic borne eggshell.
-
b Oil borne eggshell.
-
c Powdered filler.
-
d Flexible filler.
Frage 2
Frage
What is the most suitable acrylic borne coating to use as a ground coat when applying a
water borne system?
Antworten
-
a Gloss.
-
b Eggshell.
-
c Emulsion.
-
d Undercoat.
Frage 3
Frage
Which of the following can cause bittiness to decorative work?
Antworten
-
a Uneven colour.
-
b Uneven application.
-
c Insufficient material.
-
d Insufficient preparation.
Frage 4
Frage
What is the correct way to lay off a solvent borne eggshell ground coat on a wall?
Antworten
-
a Crisscross.
-
b Vertically.
-
c Arching.
-
d Horizontally.
Frage 5
Frage
What is the main benefit of using a stipple brush on ground coats?
Antworten
-
a It makes the application faster.
-
b It reduces the drying time.
-
c It removes brush marks.
-
d It deepens the colour
Frage 6
Frage
What material is mixed with a glaze to produce a scumble?
Antworten
-
a Oil.
-
b Spirit.
-
c Water.
-
d Colourant
Frage 7
Frage
What tool is used to create a soft appearance on a glazed surface?
Antworten
-
a Natural sponge.
-
b Mohair roller.
-
c Stipple brush.
-
d Chamois leather.
Frage 8
Frage
Other than boots and overalls, which PPE should be worn when applying broken colour
effect?
Antworten
-
a Mask.
-
b Gloves.
-
c Goggles.
-
d Ear plugs.
Frage 9
Frage
Which of the following describes a glaze?
Antworten
-
a A material used to extend the drying time in paint.
-
b One of the additives that make up a scumble.
-
c A material used to make up a stencil.
-
d An additive that makes up a primer.
Frage 10
Frage
Which material is used to extend the drying time in oil borne scumble?
Antworten
-
a White spirit.
-
b Linseed oil.
-
c Colourant.
-
d Glaze.
Frage 11
Frage
What will cause yellowing to broken colour after a period of time?
Antworten
-
a Lack of light.
-
b Lack of spirit.
-
c Lack of scumble.
-
d Lack of colourant
Frage 12
Frage
Why should more scumble than needed be mixed together for a piece of work?
Antworten
-
a To save time.
-
b To repair damage.
-
c To allow for spillages.
-
d To prepare for the next job
Frage 13
Frage
Adding thinners to the scumble will alter the effect by
Antworten
-
a adding shine
-
b darkening
-
c yellowing
-
d lightening.
Frage 14
Frage
Which of the following describes a substrate that allows light to pass through but cannot
be seen through?
Antworten
-
a Translucent.
-
b Reflective.
-
c Transparent.
-
d Opaque.
Frage 15
Frage
When rag rolling what application fault is caused by not overlapping the pattern?
Antworten
-
a Creeping.
-
b Skidding.
-
c Bleeding.
-
d Banding
Frage 16
Frage
How can skidding be prevented?
Antworten
-
a Keeping a wet edge going.
-
b Crossing over when ragging.
-
c Using the correct ground coat.
-
d Mixing the correct ratio of materials
Frage 17
Frage
What would happen if incorrect tape is used when masking?
Antworten
-
a Uneven edges.
-
b Crisp edges.
-
c Bleeding.
-
d Creepage.
Frage 18
Frage
Damage to surface when removing masking tape is mainly caused by
Antworten
-
a incorrect tape choice
-
b pulling the tape off slowly
-
c reducing the tackiness of the tape
-
d pulling the tape towards the surface.
Frage 19
Frage
What is the correct process when cleaning chamois leathers?
Antworten
-
a Wash, fold, store.
-
b Dry, fold, store.
-
c Wash, dry, store.
-
d Hang, dry, store.
Frage 20
Frage
How should brushes be stored after cleaning to allow for drying?
Antworten
-
a Hung in ventilated area.
-
b Hung up in a cupboard.
-
c Laid on a bench.
-
d Laid in a box.
Frage 21
Frage
What type of stencil is cut out and paint applied over the opening shown in the image?
Antworten
-
a Positive.
-
b Multi.
-
c Plate.
-
d Negative
Frage 22
Frage
When carrying out stencil work in a room the focal point is most likely to be a
Antworten
-
a chimney breast
-
b wall with a door
-
c window wall
-
d corner.
Frage 23
Frage
What is the main purpose of registration marks?
Antworten
-
a To find the centre.
-
b To keep the stencil level.
-
c To identify the starting point.
-
d To identify the finishing point
Frage 24
Frage
Why should low tack tape be used to secure stencil plates?
Antworten
-
a To prevent buckling.
-
b To prevent creeping.
-
c To prevent uneven colour.
-
d To prevent surface damage.
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.