Copy and Edit

PC_architecture_Final_Preparation

Description

PC Arc Quiz on PC_architecture_Final_Preparation, created by Alisher Kassymov on 22/05/2018.
Alisher Kassymov
Quiz by Alisher Kassymov , updated more than 1 year ago
Alisher Kassymov
Created by Alisher Kassymov over 6 years ago
612
18
0

Resource summary

Question 1

Question
What is a Latency:
Answer
  • is amount of data that can be in flight at the same time (Little’s Law)
  • is the number of accesses per unit time – If m instructions are loads/stores, 1 + m memory accesses per instruction, CPI = 1 requires at least 1 + m memory accesses per cycle
  • is time for a single access – Main memory latency is usually >> than processor cycle time

Question 2

Question
What occurs at Intruction fetches when we speak about Common And Predictable Memory Reference Patterns?
Answer
  • n loop iterations
  • subroutine call
  • vector access

Question 3

Question
What occurs at Stack access when we speak about Common And Predictable Memory Reference Patterns?
Answer
  • n loop iterations
  • subroutine call
  • vector access

Question 4

Question
What occurs at Data access when we speak about Common And Predictable Memory Reference Patterns?
Answer
  • subroutine call
  • n loop iterations
  • vector access

Question 5

Question
Cache HIT:
Answer
  • No Write Allocate, Write Allocate
  • Write Through, Write Back

Question 6

Question
Cache MISS:
Answer
  • No Write Allocate, Write Allocate
  • Write Through, Write Back

Question 7

Question
Average Memory Access Time is equal:
Answer
  • Hit Time * ( Miss Rate + Miss Penalty )
  • Hit Time - ( Miss Rate + Miss Penalty )
  • Hit Time / ( Miss Rate - Miss Penalty )
  • Hit Time + ( Miss Rate * Miss Penalty )

Question 8

Question
Compulsory -
Answer
  • cache is too small to hold all data needed by program, occur even under perfect replacement policy (loop over 5 cache lines)
  • first-reference to a block, occur even with infinite cache
  • misses that occur because of collisions due to less than full associativity (loop over 3 cache lines)

Question 9

Question
Capacity -
Answer
  • cache is too small to hold all data needed by program, occur even under perfect replacement policy (loop over 5 cache lines)
  • misses that occur because of collisions due to less than full associativity (loop over 3 cache lines)
  • first-reference to a block, occur even with infinite cache

Question 10

Question
Conflict -
Answer
  • first-reference to a block, occur even with infinite cache
  • misses that occur because of collisions due to less than full associativity (loop over 3 cache lines)
  • cache is too small to hold all data needed by program, occur even under perfect replacement policy (loop over 5 cache lines)

Question 11

Question
Algorithm for Cache HIT:
Answer
  • Processor issues load request to cache -> Replace victim block in cache with new block -> return copy of data from cache
  • Processor issues load request to cache -> Read block of data from main memory -> return copy of data from cache
  • Processor issues load request to cache -> Compare request address to cache tags and see if there is a match -> return copy of data from cache

Question 12

Question
Algorithm for Cache MISS:
Answer
  • Processor issues load request to cache -> Compare request address to cache tags and see if there is a match -> Read block of data from main memory -> Replace victim block in cache with new block -> return copy of data from cache
  • Processor issues load request to cache -> Read block of data from main memory -> return copy of data from cache
  • Processor issues load request to cache -> Replace victim block in cache with new block -> return copy of data from cache

Question 13

Question
The formula of “Iron Law” of Processor Performance:
Answer
  • time/program = instruction/program * cycles/instruction * time/cycle
  • time/program = instruction/program * cycles/instruction + time/cycle
  • time/program = instruction/program + cycles/instruction * time/cycle

Question 14

Question
Structural Hazard:
Answer
  • An instruction depends on a data value produced by an earlier instruction
  • An instruction in the pipeline needs a resource being used by another instruction in the pipeline
  • Whether or not an instruction should be executed depends on a control decision made by an earlier instruction

Question 15

Question
Data Hazard:
Answer
  • Whether or not an instruction should be executed depends on a control decision made by an earlier instruction
  • An instruction in the pipeline needs a resource being used by another instruction in the pipeline
  • An instruction depends on a data value produced by an earlier instruction

Question 16

Question
Control Hazard:
Answer
  • Whether or not an instruction should be executed depends on a control decision made by an earlier instruction
  • An instruction depends on a data value produced by an earlier instruction
  • An instruction in the pipeline needs a resource being used by another instruction in the pipeline

Question 17

Question
What is a Bandwidth:
Answer
  • a is the number of accesses per unit time – If m instructions are loads/stores, 1 + m memory accesses per instruction, CPI = 1 requires at least 1 + m memory accesses per cycle
  • is time for a single access – Main memory latency is usually >> than processor cycle time
  • is amount of data that can be in flight at the same time (Little’s Law)

Question 18

Question
What is a Bandwidth-Delay Product:
Answer
  • is the number of accesses per unit time – If m instructions are loads/stores, 1 + m memory accesses per instruction, CPI = 1 requires at least 1 + m memory accesses per cycle
  • is time for a single access – Main memory latency is usually >> than processor cycle time
  • is amount of data that can be in flight at the same time (Little’s Law)

Question 19

Question
What is Computer Architecture?
Answer
  • the programs used to direct the operation of a computer, as well as documentation giving instructions on how to use them
  • is the design of the abstraction/implementation layers that allow us to execute information processing applications efficiently using manufacturing technologies
  • is a group of computer systems and other computing hardware devices that are linked together through communication channels to facilitate communication and resource-sharing among a wide range of users

Question 20

Question
Least Recently Used (LRU):
Answer
  • FIFO with exception for most recently used block(s)
  • Used in highly associative caches
  • cache state must be updated on every access

Question 21

Question
Cache Hit -
Answer
  • Write Through – write both cache and memory, generally higher traffic but simpler to design
  • write cache only, memory is written when evicted, dirty bit per block avoids unnecessary write backs, more complicated
  • No Write Allocate – only write to main memory

Question 22

Question
Reduce Miss Rate: Large Cache Size. Empirical Rule of Thumb:
Answer
  • None of them
  • If cache size is doubled, miss rate usually drops by about √2
  • Direct-mapped cache of size N has about the same miss rate as a two-way set- associative cache of size N/2

Question 23

Question
Reduce Miss Rate: High Associativity. Empirical Rule of Thumb:
Answer
  • Direct-mapped cache of size N has about the same miss rate as a two-way set- associative cache of size N/2
  • None of them
  • If cache size is doubled, miss rate usually drops by about √2

Question 24

Question
Exploit temporal locality:
Answer
  • by remembering the contents of recently accessed locations
  • by fetching blocks of data around recently accessed locations
  • None of them

Question 25

Question
Exploit spatial locality:
Answer
  • None of them
  • by remembering the contents of recently accessed locations
  • by fetching blocks of data around recently accessed locations

Question 26

Question
Structural Hazard:
Answer
  • An instruction depends on a data value produced by an earlier instruction
  • An instruction in the pipeline needs a resource being used by another instruction in the pipeline
  • Whether or not an instruction should be executed depends on a control decision made by an earlier instruction

Question 27

Question
Data Hazard:
Answer
  • An instruction in the pipeline needs a resource being used by another instruction in the pipeline
  • Whether or not an instruction should be executed depends on a control decision made by an earlier instruction
  • An instruction depends on a data value produced by an earlier instruction

Question 28

Question
What is the access time?
Answer
  • Describes the technology inside the memory chips and those innovative, internal organizations
  • Time between when a read is requested and when the desired word arrives
  • The minimum time between requests to memory.
  • None of them

Question 29

Question
What is the cycle time?
Answer
  • The minimum time between requests to memory
  • Time between when a read is requested and when the desired word arrives
  • The maximum time between requests to memory.
  • None of them

Question 30

Question
What does SRAM stands for?
Answer
  • System Random Access memory
  • Static Random Access memory
  • Short Random Accessmemory
  • None of them

Question 31

Question
What does DRAM stands for?
Answer
  • Dataram Random Access memory
  • Dual Random Access memory
  • Dynamic Random Access memory

Question 32

Question
What does DDR stands for?
Answer
  • None of them
  • Double data reaction
  • Dual data rate
  • Double data rate

Question 33

Question
What is kernel process?
Answer
  • Provide at least two modes, indicating whether the running process is a user process or an operating system process
  • Provide a portion of the processor state that a user process can use but not write
  • Provide at least five modes, indicating whether the running process is a user process or an operating system process
  • None of them

Question 34

Question
Which one is NOT concerning to pitfall?
Answer
  • Implementing a virtual machine monitor on an instruction set architecture that wasn’t designed to be virtualizable
  • Simulating enough instructions to get accurate performance measures of the memory hierarchy
  • Predicting cache performance of one program from another
  • Over emphasizing memory bandwidth in DRAMs

Question 35

Question
Which one is concerning to fallacy?
Answer
  • Over emphasizing memory bandwidth in DRAMs
  • Implementing a virtual machine monitor on an instruction set architecture that wasn’t designed to be virtualizable
  • Predicting cache performance of one program from another
  • Simulating enough instructions to get accurate performance measures of the memory hierarchy

Question 36

Question
If we talk about storage systems an interaction or transaction with a computer is divided for first what is an “System response time” - ?:
Answer
  • The time from the reception of the response until the user begins to enter the next command
  • The time between when the user enters the command and the complete response is displayed
  • The time for the user to enter the command

Question 37

Question
If we talk about storage systems an interaction or transaction with a computer is divided for first what is an “Think time” - ?:
Answer
  • The time from the reception of the response until the user begins to enter the next command
  • The time between when the user enters the command and the complete response is displayed
  • The time for the user to enter the command

Question 38

Question
Little’s Law and a series of definitions lead to several useful equations for “Time server” - :
Answer
  • Average time per task in the queue
  • Average time/task in the system, or the response time, which is the sum of Time queue and Time server
  • Average time to service a task; average service rate is 1/Time server traditionally represented by the symbol μ in many queuing texts

Question 39

Question
Little’s Law and a series of definitions lead to several useful equations for “Time queue” - :
Answer
  • Average time to service a task; average service rate is 1/Time server traditionally represented by the symbol μ in many queuing texts
  • Average time per task in the queue
  • Average time/task in the system, or the response time, which is the sum of Time queue and Time server

Question 40

Question
Little’s Law and a series of definitions lead to several useful equations for “Time system” - :
Answer
  • Average time/task in the system, or the response time, which is the sum of Time queue and Time server
  • Average time to service a task; average service rate is 1/Time server traditionally represented by the symbol μ in many queuing texts
  • Average time per task in the queue

Question 41

Question
Little’s Law and a series of definitions lead to several useful equations for “Length server” - :
Answer
  • Average length of queue
  • Average number of tasks in service

Question 42

Question
Little’s Law and a series of definitions lead to several useful equations for “Length queue” -:
Answer
  • Average length of queue
  • Average number of tasks in service

Question 43

Question
How many issue queue used in Centralized Superscalar 2 and Exceptions?
Answer
  • 4
  • 3
  • 2
  • 1

Question 44

Question
How many issue queue used in Distributed Superscalar 2 and Exceptions:
Answer
  • 4
  • 3
  • 1
  • 2

Question 45

Question
How many instructions used in Distributed Superscalar 2 and Exceptions?
Answer
  • 4
  • 3
  • 2
  • 1

Question 46

Question
How many issue queue used in Centralized Superscalar 2 and Exceptions?
Answer
  • 1
  • 2
  • 3
  • 4

Question 47

Question
Which of the following formula is true about Issue Queue for “Instruction Ready”:
Answer
  • Instruction Ready = (!Vsrc1 || !Psrc1)&&(!Vsrc0 || !Psrc0)&& no structural hazards
  • Instruction Ready = (!Vsrc0 || !Psrc1)&&(!Vsrc1 || !Psrc0)&& no structural hazards
  • Instruction Ready = (!Vsrc0 || !Psrc0)&&(!Vsrc1 || !Psrc1)&& no structural hazards
  • Instruction Ready = (!Vsrc1 || !Psrc1)&&(!Vsrc0 || !Psrc1)&& no structural hazards

Question 48

Question
What is a ARF:
Answer
  • Architectural Register File
  • Architecture Relocation File
  • Architecture Reload File
  • Architectural Read File

Question 49

Question
What is a ROB?
Answer
  • Read Only Buffer
  • Reorder Buffer
  • Reload Buffer
  • Recall Buffer

Question 50

Question
What is a FSB?
Answer
  • Finished Star Buffer
  • Finished Stall Buffer
  • Finished Store Buffer
  • Finished Stack Buffer

Question 51

Question
What is a PRF?
Answer
  • Pure Register File
  • Physical Register File
  • Pending Register File
  • Pipeline Register File

Question 52

Question
What is a SB?
Answer
  • Scalebit
  • Scaleboard
  • Scorebased
  • Scoreboard

Question 53

Question
How many stages used in Superscalar (Pipeline)?
Answer
  • 5
  • 4
  • 6
  • 7

Question 54

Question
What is about Superscalar means “F-D-X-M-W”?
Answer
  • Fetch, Decode, Instruct, Map, Write
  • Fetch, Decode, Execute, Memory, Writeback
  • Fetch, Decode, Excite, Memory, Write
  • Fetch, Decode, Except, Map, Writeback

Question 55

Question
Speculating on Exceptions “Prediction mechanism” is -
Answer
  • None of them
  • Only write architectural state at commit point, so can throw away partially executed instructions after exception
  • Exceptions are rare, so simply predicting no exceptions is very accurate
  • Exceptions detected at end of instruction execution pipeline, special hardware for various exception types

Question 56

Question
Speculating on Exceptions “Check prediction mechanism” is -
Answer
  • The way in which an object is accessed by a subject
  • Exceptions detected at end of instruction execution pipeline, special hardware for various exception types
  • Exceptions are rare, so simply predicting no exceptions is very accurate
  • None of them

Question 57

Question
Speculating on Exceptions “Recovery mechanism” is
Answer
  • None of them
  • An entity capable of accessing objects
  • Exceptions are rare, so simply predicting no exceptions is very accurate
  • Only write architectural state at commit point, so can throw away partially executed instructions after exception

Question 58

Question
What is a RT?
Answer
  • Rename Table
  • Recall Table
  • Relocate Table
  • Remove Table

Question 59

Question
What is a FL?
Answer
  • Free Launch
  • Free List
  • Free Leg
  • Free Last

Question 60

Question
What is an IQ?
Answer
  • Internal Queue
  • Instruction Queue
  • Issue Queue
  • Interrupt Queue

Question 61

Question
At VLIW “Superscalar Control Logic Scaling” which parameters are used?
Answer
  • Width and Height
  • Width and Lifetime
  • Time and Cycle
  • Length and Addition

Question 62

Question
Out-of-Order Control Complexity MIPS R10000 which element is in Control Logic?
Answer
  • Register name
  • Instruction cache
  • Data tags
  • Data cache

Question 63

Question
Out-of-Order Control Complexity MIPS R10000 which element is not in Control Logic?
Answer
  • Integer Datapath
  • CLK
  • Address Queue
  • Free List

Question 64

Question
What is “VLIW”?
Answer
  • Very Less Interpreter Word
  • Very Long Instruction Word
  • Very Light Internal Word
  • Very Low Invalid Word

Question 65

Question
At VLIW by “performance and loop iteration” which time is longer?
Answer
  • Loop Unrolled
  • Software Pipelined

Question 66

Question
At VLIW by “performance and loop iteration” which time is shorter?
Answer
  • Loop Unrolled
  • Software Pipelined

Question 67

Question
At VLIW Speculative Execution, which of this solution is true about problem: Branches restrict compiler code motion?
Answer
  • Hardware to check pointer hazards
  • Speculative operations that don’t cause exceptions

Question 68

Question
At VLIW Speculative Execution, which of this solution is true about problem: Possible memory hazards limit code scheduling:
Answer
  • Hardware to check pointer hazards
  • Speculative operations that don’t cause exceptions

Question 69

Question
What is an ALAT? :
Answer
  • Advanced Load Address Table
  • Allocated Link Address Table
  • Allowing List Address Table
  • Addition Long Accessibility Table

Question 70

Question
At VLIW Multi-Way Branches, which of this solution is true about problem: Long instructions provide few opportunities for branches:
Answer
  • Allow one instruction to branch multiple directions
  • Speculative operations that don’t cause exceptions

Question 71

Question
What is a Compulsory?
Answer
  • first-reference to a block, occur even with infinite cache
  • cache is too small to hold all data needed by program, occur even under perfect replacement policy
  • misses that occur because of collisions due to less than full associativity

Question 72

Question
What is a Capacity?
Answer
  • cache is too small to hold all data needed by program, occur even under perfect replacement policy
  • misses that occur because of collisions due to less than full associativity
  • first-reference to a block, occur even with infinite cache

Question 73

Question
What is a Conflict?
Answer
  • misses that occur because of collisions due to less than full associativity
  • first-reference to a block, occur even with infinite cache
  • cache is too small to hold all data needed by program, occur even under perfect replacement policy

Question 74

Question
In Multilevel Caches “Local miss rate” equals =
Answer
  • misses in cache / accesses to cache
  • misses in cache / CPU memory accesses
  • misses in cache / number of instructions

Question 75

Question
In Multilevel Caches “Global miss rate” equals =
Answer
  • misses in cache / CPU memory accesses
  • misses in cache / accesses to cache
  • misses in cache / number of instructions

Question 76

Question
In Multilevel Caches “Misses per instruction” equals =
Answer
  • misses in cache / number of instructions
  • misses in cache / accesses to cache
  • misses in cache / CPU memory accesses

Question 77

Question
Non-Blocking Cache Timeline for “Blocking Cache” the sequence is - ?
Answer
  • CPU time-Cache Miss-Miss Penalty-CPU time
  • CPU time->Cache Miss->Hit->Stall on use->Miss Penalty->CPU time
  • CPU time->Cache Miss->Miss->Stall on use->Miss Penalty->CPU time

Question 78

Question
Non-Blocking Cache Timeline for “Hit Under Miss” the sequence is -?
Answer
  • CPU time->Cache Miss->Hit->Stall on use->Miss Penalty->CPU time
  • CPU time-Cache Miss-Miss Penalty-CPU time
  • CPU time->Cache Miss->Miss->Stall on use->Miss Penalty->CPU time

Question 79

Question
Non-Blocking Cache Timeline for “Miss Under Miss” the sequence is -?
Answer
  • CPU time->Cache Miss->Miss->Stall on use->Miss Penalty->Miss Penalty->CPU time
  • CPU time-Cache Miss-Miss Penalty-CPU time
  • CPU time->Cache Miss->Hit->Stall on use->Miss Penalty->CPU time

Question 80

Question
What does mean MSHR?
Answer
  • Miss Status Handling Register
  • Map Status Handling Reload
  • Mips Status Hardware Register
  • Memory Status Handling Register

Question 81

Question
What does MAF?
Answer
  • Miss Address File
  • Map Address File
  • Memory Address File

Question 82

Question
At Critical Word First for Miss Penalty chose correct sequence of Basic Blocking Cache “Order of fill”:
Answer
  • 0,1,2,3,4,5,6,7
  • 3,4,5,6,7,0,1,2

Question 83

Question
At Critical Word First for Miss Penalty chose correct sequence of Blocking Cache with Critical Word first “Order of fill”:
Answer
  • 3,4,5,6,7,0,1,2
  • 0,1,2,3,4,5,6,7

Question 84

Question
Storage Systems, “Larger block size to reduce miss rate”
Answer
  • The simplest way to reduce the miss rate is to take advantage of spatial locality and increase the block size
  • The obvious way to reduce capacity misses is to increase cache capacity
  • Obviously, increasing associativity reduces conflict misses

Question 85

Question
Storage Systems, “Bigger caches to reduce miss rate” -
Answer
  • The obvious way to reduce capacity misses is to increase cache capacity
  • Obviously, increasing associativity reduces conflict misses
  • The simplest way to reduce the miss rate is to take advantage of spatial locality and increase the block size

Question 86

Question
Storage Systems, “Higher associativity to reduce miss rate” -
Answer
  • Obviously, increasing associativity reduces conflict misses
  • The obvious way to reduce capacity misses is to increase cache capacity
  • The simplest way to reduce the miss rate is to take advantage of spatial locality and increase the block size

Question 87

Question
In Non-Blocking Caches what does mean “Critical Word First”?
Answer
  • Request the missed word first from memory and send it to the processor as soon as it arrives; let the processor continue execution while filling the rest of the words in the block
  • Fetch the words in normal order, but as soon as the requested word of the block arrives, send it to the processor and let the processor continue execution

Question 88

Question
In Non-Blocking Caches what does mean “Early restart”?
Answer
  • Fetch the words in normal order, but as soon as the requested word of the block arrives, send it to the processor and let the processor continue execution
  • Request the missed word first from memory and send it to the processor as soon as it arrives; let the processor continue execution while filling the rest of the words in the block

Question 89

Question
A virus classification by target includes the following categories, What is a File infector?
Answer
  • A typical approach is as follows
  • Infects files that the operating system or shell consider to be executable
  • The key is stored with the virus
  • Far more sophisticated techniques are possible

Question 90

Question
What is a RAID 0?
Answer
  • It has no redundancy and is sometimes nicknamed JBOD, for “just a bunch of disks,” although the data may be striped across the disks in the array
  • Also called mirroring or shadowing, there are two copies of every piece of data
  • This organization was inspired by applying memory-style error correcting codes to disks

Question 91

Question
What is a RAID 1?
Answer
  • Also called mirroring or shadowing, there are two copies of every piece of data
  • It has no redundancy and is sometimes nicknamed JBOD, for “just a bunch of disks,” although the data may be striped across the disks in the array
  • This organization was inspired by applying memory-style error correcting codes to disks

Question 92

Question
What is a RAID 2?
Answer
  • This organization was inspired by applying memory-style error correcting codes to disks
  • It has no redundancy and is sometimes nicknamed JBOD, for “just a bunch of disks,” although the data may be striped across the disks in the array
  • Also called mirroring or shadowing, there are two copies of every piece of data

Question 93

Question
What is a RAID 3?
Answer
  • Since the higher-level disk interfaces understand the health of a disk, it’s easy to figure out which disk failed
  • Many applications are dominated by small accesses
  • Also called mirroring or shadowing, there are two copies of every piece of data

Question 94

Question
What is a RAID 4?
Answer
  • Many applications are dominated by small accesses
  • Since the higher-level disk interfaces understand the health of a disk, it’s easy to figure out which disk failed
  • Also called mirroring or shadowing, there are two copies of every piece of data

Question 95

Question
At storage systems Gray and Siewiorek classify faults what does mean “Hardware faults”? :
Answer
  • Devices that fail, such as perhaps due to an alpha particle hitting a memory cell
  • Faults in software (usually) and hardware design (occasionally)
  • Mistakes by operations and maintenance personnel

Question 96

Question
At storage systems Gray and Siewiorek classify faults what does mean “Design faults”? :
Answer
  • Faults in software (usually) and hardware design (occasionally)
  • Devices that fail, such as perhaps due to an alpha particle hitting a memory cell
  • Mistakes by operations and maintenance personnel

Question 97

Question
At storage systems Gray and Siewiorek classify faults what does mean “Operation faults”? :
Answer
  • Mistakes by operations and maintenance personnel
  • Devices that fail, such as perhaps due to an alpha particle hitting a memory cell
  • Faults in software (usually) and hardware design (occasionally)

Question 98

Question
At storage systems Gray and Siewiorek classify faults what does mean “Environmental faults”? :
Answer
  • Fire, flood, earthquake, power failure, and sabotage
  • Faults in software (usually) and hardware design (occasionally)
  • Devices that fail, such as perhaps due to an alpha particle hitting a memory cell

Question 99

Question
If we talk about storage systems an interaction or transaction with a computer is divided for first what is an “Entry time” - ? :
Answer
  • The time for the user to enter the command
  • The time between when the user enters the command and the complete response is displayed
  • The time from the reception of the response until the user begins to enter the next command

Question 100

Question
If we talk about storage systems an interaction or transaction with a computer is divided for first what is an “System response time” - ?:
Answer
  • The time between when the user enters the command and the complete response is displayed
  • The time for the user to enter the command
  • The time from the reception of the response until the user begins to enter the next command

Question 101

Question
If we talk about storage systems an interaction or transaction with a computer is divided for first what is an “Think time” - ?:
Answer
  • The time from the reception of the response until the user begins to enter the next command
  • The time for the user to enter the command
  • The time between when the user enters the command and the complete response is displayed

Question 102

Question
Little’s Law and a series of definitions lead to several useful equations for “Time server” - :
Answer
  • Average time to service a task; average service rate is 1/Time server traditionally represented by the symbol μ in many queuing texts
  • Average time/task in the system, or the response time, which is the sum of Time queue and Time server
  • Average time per task in the queue

Question 103

Question
Little’s Law and a series of definitions lead to several useful equations for “Time queue” - :
Answer
  • Average time per task in the queue
  • Average time to service a task; average service rate is 1/Time server traditionally represented by the symbol μ in many queuing texts
  • Average time/task in the system, or the response time, which is the sum of Time queue and Time server

Question 104

Question
Little’s Law and a series of definitions lead to several useful equations for “Time system” - :
Answer
  • Average time/task in the system, or the response time, which is the sum of Time queue and Time server
  • Average time to service a task; average service rate is 1/Time server traditionally represented by the symbol μ in many queuing texts
  • Average time per task in the queue

Question 105

Question
Little’s Law and a series of definitions lead to several useful equations for “Length server” - :
Answer
  • Average number of tasks in service
  • Average length of queue

Question 106

Question
Little’s Law and a series of definitions lead to several useful equations for “Length queue” -:
Answer
  • Average length of queue
  • Average number of tasks in service

Question 107

Question
How many size of Cache L1 is true approximately? :
Answer
  • 8 KB
  • 256 KB
  • 2 MB

Question 108

Question
How many size of Cache L2 is true approximately?
Answer
  • 256 KB
  • 4 KB
  • 32 MB

Question 109

Question
How many size of Cache L3 is true approximately?
Answer
  • 3 MB
  • 256 MB
  • 256 KB

Question 110

Question
How many main levels of Cache Memory?
Answer
  • 3
  • 2
  • 6
  • 8

Question 111

Question
What is a “Synchronization” in Cache Memory?
Answer
  • Execution or waiting for synchronization variables
  • Execution in the OS that is neither idle nor in synchronization access
  • Execution in user code

Question 112

Question
What is a “Kernel” in Cache Memory?
Answer
  • Execution or waiting for synchronization variables
  • Execution in the OS that is neither idle nor in synchronization access
  • Execution in user code

Question 113

Question
What is a “Synchronization” in Cache Memory?
Answer
  • Execution in the OS that is neither idle nor in synchronization access
  • Execution in user code
  • Execution or waiting for synchronization variables

Question 114

Question
Network performance depends of what?
Answer
  • performance of swithes and transmission system
  • performance of switches
  • performance of transmission system
  • has no dependensies

Question 115

Question
The time between the start and the completion of an event ,such as milliseconds for a disk access is...
Answer
  • latency
  • bandwidth
  • throughput
  • performance

Question 116

Question
Total amount of work done in a given time ,such as megabytes per second for disk transfer...
Answer
  • bandwidth
  • latency
  • throughput
  • performance

Question 117

Question
Learning curve itself is best measured by change in...
Answer
  • yeld
  • bytes
  • bits
  • seconds

Question 118

Question
Products that are sold by multiple vendors in large volumes and are essentialy identical
Answer
  • commodities
  • boxes
  • folders
  • files

Question 119

Question
Integrated circuit processes are charecterized by the
Answer
  • feature size
  • permanent size n
  • compex size
  • fixed size

Question 120

Question
For CMOS chips, the traditional dominant energy consumption has been in switching transistors, called ____
Answer
  • dynamic power
  • physical energy
  • constant supply
  • simple battery

Question 121

Question
Manufacturing costs that decrease over time are ____
Answer
  • the learning curve
  • the cycled line
  • the regular option
  • the final loop

Question 122

Question
Volume is a ________ key factor in determining cost
Answer
  • second
  • first
  • fifth
  • third

Question 123

Question
The most companies spend only ____________ of their income on R&D, which includes all engineering.
Answer
  • 4% to 12%
  • 15% to 30%
  • 1% to 17%
  • 30% to 48%

Question 124

Question
Systems alternate between two states of service with respect to an SLA:
Answer
  • 1. Service accomplishment, where the service is delivered as specified 2. Service interruption, where the delivered service is different from the SLA
  • 1. Service accomplishment, where the service is not delivered as specified 2. Service interruption, where the delivered service is different from the SLA
  • 1. Service accomplishment, where the service is not delivered as specified 2. Service interruption, where the delivered service is not different from the SLA
  • 1. Service accomplishment, where the service is delivered as specified 2. Service interruption, where the delivered service is not different from the SLA

Question 125

Question
Desktop benchmarks divide into __ broad classes:
Answer
  • two
  • three
  • four
  • five

Question 126

Question
What MTTF means:
Answer
  • mean time to failure
  • mean time to feauture
  • mean this to failure
  • my transfers to failure

Question 127

Question
A widely held rule of thumb is that a program spends __ of its execution time in only __ of the code.
Answer
  • 90% 10%
  • 50% 50%
  • 70% 30%
  • 89% 11%

Question 128

Question
(Performance for entire task using the enhancement when possible) / (Performance for entire task without using the enhancement) is equals to:
Answer
  • Speedup
  • Efficiency
  • Probability
  • Ration

Question 129

Question
Which of the following descriptions corresponds to static power?
Answer
  • Grows proportionally to the transistor count (whether or not the transistors are switching)
  • Proportional to the product of the number of switching transistors and the switching rate Probability
  • Proportional to the product of the number of switching transistors and the switching rate
  • All of the above

Question 130

Question
Which of the following descriptions corresponds to dynamic power?
Answer
  • Proportional to the product of the number of switching transistors and the switching rate
  • Grows proportionally to the transistor count (whether or not the transistors are switching)
  • Certainly a design concern
  • None of the above

Question 131

Question
Which of the written below is NOT increase power consumption?
Answer
  • Increasing multithreading
  • Increasing performance
  • Increasing multiple cores
  • Increasing multithreading (V baze tak napisano)

Question 132

Question
Growing performance gap between peak and sustained performance translates to increasing energy per unit of performance, when:
Answer
  • The number of transistors switching will be proportional to the peak issue rate, and the performance is proportional to the sustained rate
  • The number of transistors switching will be proportionalto the sustained rate, and the performance is proportionalto the peak issue rate
  • The number of transistors switching will be proportional to the sustained rate
  • The performance is proportional to the peak issue rate

Question 133

Question
If we want to sustain four instructions per clock
Answer
  • We must fetch more, issue more, and initiate execution on more than four instructions
  • We must fetch less, issue more, and initiate execution on more than two instructions
  • We must fetch more, issue less, and initiate execution on more than three instructions
  • We must fetch more, issue more, and initiate execution on less than five instructions

Question 134

Question
If speculation were perfect, it could save power, since it would reduce the execution time and save _____________, while adding some additional overhead to implement
Answer
  • Static power
  • Dynamic power
  • Processing rate
  • Processor state

Question 135

Question
When speculation is not perfect, it rapidly becomes energy inefficient, since it requires additional ___________ both for the incorrect speculation and for the resetting of the processor state
Answer
  • Dynamic power
  • Static power
  • Processing rate
  • Processor state

Question 136

Question
Which of these concepts is NOT illustrated case study by Wen-mei W. Hwu and John W. Sias
Answer
  • Achievable ILP with software resource constraints
  • Limited ILP due to software dependences
  • Achievable ILP with hardware resource constraints
  • Variability of ILP due to software and hardware interaction

Question 137

Question
What is a hash table?
Answer
  • Popular data structure for organizing a large collection of data items so that one can quickly answer questions
  • Popular data structure for updating large collections, so that one can hardly answer questions
  • Popular tables for organizing a large collection of data structure
  • Popular data structure for deletingsmall collections of data items so that one can hardly answer questions

Question 138

Question
Which of these is NOT characteristics of recent highperformance microprocessors?
Answer
  • Color
  • Power
  • Functional unit capability
  • Clock rate

Question 139

Question
How this process called: “Operations execute as soon as their operands are available”
Answer
  • data flow execution
  • instruction execution
  • data control execution
  • instruction field execution

Question 140

Question
For what the reorder buffer is used :
Answer
  • To pass results among instructions that may be speculated
  • To pass parameters through instructions that may be speculated
  • To get additional registers in the same way as the reservation stations
  • To control registers

Question 141

Question
How many fields contains the entry in the ROB:
Answer
  • 4
  • 5
  • 6
  • 3

Question 142

Question
Choose correct fields of entry in the ROB:
Answer
  • the instruction type, the destination field, the value field, and the ready field
  • the source type, the destination field, the value field, and the ready field
  • the program type, the ready field, the parameter field, the destination field
  • the instruction type, the destination field, and the ready field

Question 143

Question
Choose the steps of instruction execution:
Answer
  • issue, execute, write result, commit
  • execution, commit, rollback
  • issue, execute, override, exit
  • begin, write, interrupt, commit

Question 144

Question
Which one is not the major flavor of Multiple-issue processors
Answer
  • statistically superscalar processors
  • dynamically scheduled superscalar processors
  • statically scheduled superscalar processors
  • VLIW (very long instruction word) processors

Question 145

Question
Which Multiple-issue processors has not the hardware hazard detection
Answer
  • EPIC
  • Superscalar(dynamic)
  • Superscalar(static)
  • Superscalar(speculative)

Question 146

Question
Examples of EPIC:
Answer
  • Itanium
  • Pentium 4, MIPS R12K, IBM, Power5
  • MIPS and ARM
  • TI C6x

Question 147

Question
Examples of superscalar(static):
Answer
  • MIPS and ARM
  • Pentium 4, MIPS R12K, IBM, Power5
  • Itanium
  • TI C6x

Question 148

Question
Examples of superscalar(dynamic) :
Answer
  • None at the present
  • Pentium 4, MIPS R12K, IBM, Power5
  • MIPS and ARM
  • TI C6x

Question 149

Question
Examples of VLIW/LIW:
Answer
  • TI C6x
  • MIPS and ARM
  • Itanium
  • Pentium 4, MIPS R12K, IBM, Power5

Question 150

Question
A branch-prediction cache that stores the predicted address for the next instruction after a branch
Answer
  • branch-target buffer
  • data buffer
  • frame buffer
  • optical buffer

Question 151

Question
Buffering the actual target instructions allows us to perform an optimization which called:
Answer
  • branch folding
  • Branch prediction
  • Target instructions
  • Target address

Question 152

Question
Which is not the function of integrated instruction fetch unit:
Answer
  • Instruction memory commit
  • Integrated branch prediction
  • Instruction prefetch
  • Instruction memory access and buffering

Question 153

Question
What is the simple technique that predicts whether two stores or a load and a store refer to the same memory address:
Answer
  • Address aliasing prediction
  • Branch prediction
  • Integrated branch prediction
  • Dynamic branch prediction

Question 154

Question
How to decrypt RISC?
Answer
  • Reduced Instruction Set Computer
  • Recall Instruction Sell Communication
  • Rename Instruction Sequence Corporation
  • Red Instruction Small Computer

Question 155

Question
The ideal pipeline CPI is a measure of …
Answer
  • the maximum performance attainable by the implementation
  • the maximum performance attainable by the instruction
  • the minimum performance attainable by the implementation
  • the minimum performance attainable by the instruction

Question 156

Question
What is the Pipeline CP = ?
Answer
  • deal pipeline CPI + Structural stalls + Data hazard stalls + Control stalls
  • deal pipeline CPU + Data hazard stalls + Control stalls
  • deal pipeline CPU + deal pipeline CPI + Data hazard stalls + Control stalls
  • Structural stalls + Data hazard stalls + Control stalls

Question 157

Question
The simplest and most common way to increase the ILP is …?
Answer
  • to exploit parallelism among iterations of a loop
  • to exploit minimalism among iterations of a loop
  • to destroy iterations of a loop
  • to decrease the minimalism of risk

Question 158

Question
The simplest and most common way to increase the ILP is to exploit parallelism among iterations of a loop. How is often called?
Answer
  • loop-level parallelism
  • exploit-level parallelism
  • high-level minimalism
  • low-level minimalism

Question 159

Question
In parallelism have three different types of dependences, tagging him:
Answer
  • data dependences , name dependences , and control dependences
  • data dependences , name dependences , and surname dependences
  • datagram dependences , name dependences , and animal dependences
  • no correct answers

Question 160

Question
What is Name dependence?
Answer
  • name dependence occurs when two instructions use the same register or memory location
  • name dependence occurs when five or more instructions use the same register or memory location
  • name dependence occurs when instructions use the same name
  • All answers is correct

Question 161

Question
When occurs an output dependence?
Answer
  • When i and instruction j write the same register or memory location
  • when i and instruction j write the same name
  • when i and instruction j write the same adress or memory location
  • All answers is correct

Question 162

Question
What is RAW (read after write)?
Answer
  • when j tries to read a source before i writes it, so j incorrectly gets the old value
  • when i tries to read a source before j writes it, so j correctly gets the old value
  • when j tries to write a source before i writes it
  • when a tries to write a source before b read it, so a incorrectly gets the old value

Question 163

Question
What is given is not a hazard?
Answer
  • RAR
  • WAR
  • WAW
  • LOL

Question 164

Question
A simple scheme for increasing the number of instructions relative to the branch and overhead instructions is…?
Answer
  • loop unrolling
  • RAR
  • loop-level
  • loop rolling

Question 165

Question
Effect that results from instruction scheduling in large code segments is called…?
Answer
  • register pressure
  • loop unrolling
  • loop-level
  • registration

Question 166

Question
The simplest dynamic branch-prediction scheme is a
Answer
  • branch-prediction buffer
  • branch buffer
  • All answers correct
  • registration

Question 167

Question
Branch predictors that use the behavior of other branches to make a prediction are called
Answer
  • correlating predictors or two-level predictors
  • branch-prediction buffer
  • branch table
  • three level loop

Question 168

Question
How many branch-selected entries are in a (2,2) predictor that has a total of 8K bits in the prediction buffer? If we know that Number of prediction entries selected by the branch = 8K
Answer
  • the number of prediction entries selected by the branch = 1K.
  • the number of prediction entries selected by the branch = 2K.
  • the number of prediction entries selected by the branch = 8K.
  • the number of prediction entries selected by the branch = 4K.

Question 169

Question
What is the compulsory in Cs model?
Answer
  • The very first access to a block cannot be in the cache, so the block must be brought into the cache. Compulsory misses are those that occur even if you had an infinite cache
  • If the cache cannot contain all the blocks needed during execution of a program, capacity misses (in addition to compulsory misses) will occur because of blocks being discarded and later retrieved
  • The number of accesses that miss divided by the number of accesses.
  • None of them

Question 170

Question
What is capacityin Cs model?
Answer
  • If the cache cannot contain all the blocks needed during execution of a program, capacity misses (in addition to compulsory misses) will occur because of blocks being discarded and later retrieved
  • The very first access to a block cannot be in the cache, so the block must be brought into the cache. Compulsory misses are those that occur even if you had an infinite cache.
  • The number of accesses that miss divided by the number of accesses.
  • None of them

Question 171

Question
What is conflict in Cs model?
Answer
  • If the block placement strategy is not fully associative, conflict misses (in addition to compulsory and capacity misses) will occur because a block may be discarded and later retrieved if conflicting blocks map to its set
  • The very first access to a block cannot be in the cache, so the block must be brought into the cache. Compulsory misses are those that occur even if you had an infinite cache.
  • If the cache cannot contain all the blocks needed during execution of a program, capacity misses (in addition to compulsory misses) will occur because of blocks being discarded and later retrieved
  • None of them

Question 172

Question
Choose the benefit of Cache Optimization.
Answer
  • Larger block size to reduce miss rate
  • Bigger caches to increase miss rat
  • Single level caches to reduce miss penalty
  • None of them

Question 173

Question
Choose the strategy of Seventh Optimization.
Answer
  • Critical word first
  • Critical restart
  • Sequential inter leaving
  • Merging Write Buffer to Reduce Miss Penalty

Question 174

Question
Choose the Eight Optimization
Answer
  • Merging Write Buffer to Reduce Miss Penalty
  • Critical word first
  • Nonblocking Caches to Increase Cache Bandwidth
  • Trace Caches to Reduce Hit Time

Question 175

Question
Choose the Eleventh Optimization
Answer
  • Compiler-Controlled Prefetching to Reduce Miss Penalty or Miss Rate
  • Merging Write Buffer to Reduce Miss Penalty
  • Hardware Prefetching of Instructions and Data to Reduce Miss Penalty or Miss Rate
  • None of them

Question 176

Question
What is the access time?
Answer
  • Time between when a read is requested and when the desired word arrives
  • The minimum time between requests to memory.
  • Describes the technology inside the memory chips and those innovative, internal organizations
  • None of them

Question 177

Question
What is the cycle time?
Answer
  • The minimum time between requests to memory
  • Time between when a read is requested and when the desired word arrives
  • The maximum time between requests to memory.
  • None of them

Question 178

Question
How much in percentage single-processor performance improvement has dropped to less than?
Answer
  • 11%
  • 22%
  • 33%

Question 179

Question
How many elements of the Instruction Set Architecture (ISA):
Answer
  • 6
  • 7
  • 8

Question 180

Question
What is the Thread Level Parallelism –
Answer
  • Exploits either data-level parallelism or task-level parallelism in a tightly coupled hardware model that allows for interaction among parallel threads.
  • Exploit data-level parallelism by applying a single instruction to a collection of data in parallel.
  • Exploits parallelism among largely decoupled tasks specified by the programmer or operating system.

Question 181

Question
What is the PMD in computer classes?
Answer
  • Personal mobile device
  • Powerful markup distance
  • Percentage map device

Question 182

Question
What is the Instruction Level Parallelism:
Answer
  • Exploits data-level parallelism at modest levels with compiler help using ideas like pipelining and at a medium levels using ideas like speculative execution.
  • Exploits parallelism among largely decoupled tasks specified by the programmer or operating system
  • Exploit data-level parallelism by applying a single instruction to a collection of data in parallel

Question 183

Question
How many elements in Trends of Technology?
Answer
  • 5
  • 6
  • 4

Question 184

Question
What is the Vector Architecture and Graphic Processor Units (GPUs) –
Answer
  • Exploit data-level parallelism by applying a single instruction to a collection of data in parallel.
  • Exploits data-level parallelism at modest levels with compiler help using ideas like pipelining and at a medium levels using ideas like speculative execution
  • Exploits parallelism among largely decoupled tasks specified by the programmer or operating system.

Question 185

Question
How many Optimizations’ in Cache memory Performance?
Answer
  • 8
  • 6
  • 10

Question 186

Question
What is the Reducing the Miss Rate?
Answer
  • Time Optimization
  • Compiler Optimization
  • Performance Optimization

Question 187

Question
What is the Spatial Locality?
Answer
  • Exploit by fetching blocks of data around recently accessed locations
  • Exploit by remembering the contents of recently accessed locations

Question 188

Question
What is the Temporal Locality?
Answer
  • Exploit by fetching blocks of data around recently accessed locations
  • Exploit by remembering the contents of recently accessed locations

Question 189

Question
True formula of Module availability (MTTF – mean time to failure, MTTR – mean time to repair)?
Answer
  • MTTF / (MTTF + MTTR)
  • MTTF * (MTTF + MTTR)
  • MTTF * (MTTF - MTTR)
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

'The Merchant of Venice' - William Shakespeare
cian.buckley
THEMES IN KING LEAR
Sarah-Elizabeth
Key Shakespeare Facts
Andrea Leyden
GCSE Biology, Module B4
jessmitchell
GCSE Biology Quiz
Andrea Leyden
Random German A-level Vocab
Libby Shaw
GCSE Chemistry C1 (OCR)
Usman Rauf
AQA GCSE Physics Unit 2
Gabi Germain
AQA GCSE Chemistry Unit 2
Gabi Germain
med chem 2 final exam
lola_smily
Specific topic 7.5 Timber (Stock forms)
T Andrews
Browse Library