Question 1
Question
This sprinkler is used as a way to:
Answer
-
Irrigate trees
-
Irrigate turf
-
Irrigate shrubs
Question 2
Question
When sprinklers are set to water each-other and sometimes overlap each other is called:
Answer
-
Head to head coverage
-
Poor uniformity
-
Wasted water
-
Good sprinkler spacing
Question 3
Question
To connect two or more wires, a ______ _______ is needed
Answer
-
Wire striper
-
Wire nut
-
Wire splicer
-
Chime connector
Question 4
Question
To glue pvc together you must use:
Answer
-
Super glue and primer
-
Primer and pvc cement
-
A slip fix
-
Good strength
Question 5
Question
A poly spaghetti line is also known as 1/4” polyethylene tubing?
Question 6
Question
A sprinkler that has no rotating parts is called a
Answer
-
Rotor head
-
Impact Head
-
Spray head
-
R-Van
Question 7
Question
What does GPM stand for?
Question 8
Question
What do you need to do if you see a dry spot in the turf. (Check all that apply)
Answer
-
Check the station on the controller and make sure is working there.
-
Check the zone valve to see if all components are working properly and water is flowing.
-
Check sprinkler to see if it’s balanced and working properly.
-
Probe soil to check for soil moisture.
-
Call your supervisor so he can make the assesment.
Question 9
Question
What is the most common emitter used for shrubs?
Answer
-
1-GPH
-
1-GPM
-
In-line
-
Spray head
Question 10
Question
This is a brass ball valve.
Question 11
Question
Purple PVC means
Answer
-
Potable water
-
Drinkable water
-
Sewer water
-
Non-potable water
Question 12
Question
Irrigators are required to wear proper PPE when performing their job duties. This includes:
Safety glasses,
Vest,
Gloves
Question 13
Question
The irrigation tech can take their gloves off when performing the following activities:
Pipe fitting
Valve or head replacement
Wiring
Question 14
Question
A black irrigation lateral line, that is commonly used to water shrubs, is known as:
Answer
-
PVC-pipe
-
CPVC-pipe
-
Poly-line
-
SCH-40-line
Question 15
Question
These parts are commonly known as
Answer
-
Poly fittings
-
PVC fittings
-
CPVC fittings
-
SCH-80 fittings
Question 16
Question
These parts are commonly known as
Answer
-
PVC fittings
-
Poly fittings
-
CPVC fittings
-
SCH-80 fittings
Question 17
Question
If the bakcflow preventer is off, how will the irrigated area be affected?
Answer
-
The area will get half the water
-
The area will only water at night
-
The whole area will be without water
-
The whole area will flood
Question 18
Question
These parts are commonly know as:
Answer
-
MP Rotator
-
RVAN
-
Spray nozzel
-
I-20
Question 19
Question
It is not necessary to take pictures when doing irrigation repairs.
Question 20
Question
When working on irrigation repairs, when do pictures need to be taken?
Question 21
Question
This connection is known as a
Answer
-
Wire splice
-
Wire nut
-
Wire splicer
-
Irrigation wire
Question 22
Question
Correctly name the labeled parts.
Answer
-
Flow control
-
Bleeder Screw
-
Diaphragm
-
Solenoid
-
Bonnet
-
Body
-
Flow control
-
Bleeder screw
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Bleeder screw
-
Flow control
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Flow control
-
Bleeder screw
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Bleeder Screw
-
Flow control
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Flow control
-
Bleeder screw
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
Question 23
Question
Fill in work order as if you worked at Verrado #348 in Buckeye on the corner of Main St. & Court St., worked on a regular water leak with pipe break, had the parts with you and completed the work in 1 hour.
your picture number is: 12-12-19
Answer
-
348
-
12-12-19
-
Verrado
-
Buckeye
-
12-12-19
-
960
-
60
-
960
-
60
-
12-12-19
-
0
-
1
-
0
-
1
-
WL
-
SC
-
SV
-
HM
-
1
-
2
-
8
-
Buckeye
-
Verrado
-
Main St. & Court St.
-
Yes
-
No
-
Yes
-
No
-
12-12-19
-
960
-
60
-
Verrado
-
Buckeye
-
"Your Name"
-
960
-
Inventory
-
Store
Question 24
Question
When and why are Pre-Task Plans required?
Check all that apply.
Answer
-
They must be done daily.
-
To identify possible job-site hazards.
-
Should be done before starting to work.
-
Only required if there are visible hazards.
-
Only required if the supervisor requests them.
Question 25
Question
When trenching, the work area should be secured by?
Choose all that apply.
Answer
-
Adding yellow caution tape.
-
Add cones around the area.
-
Call the people around the area to let them know
-
There's no need to secure an open trench.
Question 26
Question
The image size app is needed to take pictures for any work order:
Answer
-
to prevent going over the data allowance.
-
to keep the supervisor happy.
-
to take more pictures per day.
Question 27
Question
The purpose of an irrigation system is to supplement rain water?
Question 28
Question
What is the MAIN purpose of a Backflow preventer?
Answer
-
To shut off all the water.
-
To prevent drinking water from being contaminated.
-
To get the water from the city.
-
To connect a master valve.
Question 29
Question
Sunlight can damage exposed PVC pipes and fittings?
Question 30
Question
What are common problems that can cause the irrigation system to fail?
choose all that apply.
Answer
-
High pressure.
-
Tree roots.
-
Mowers.
-
Vandalism.
-
Construction work.
Question 31
Question
A wire toner can be used to test a solenoid?
Question 32
Question
There are 5 main steps that must be completed to correctly program a controller. what are they?
Choose all that apply.
Answer
-
Set the current date and time.
-
Set the start time.
-
Set the programs.
-
Set the days to run the program.
-
Set the station run times
-
Set the rain delay.
-
Set the seasonal adjustment.
Question 33
Question
Some controllers will allow you to manually run a complete program.
Question 34
Question
If a controller is not programmed correctly what could happen?
Choose all that apply.
Answer
-
It can cause flooding.
-
High water bills.
-
It can result in more system failures.
-
It can cause all the plant material to die.
-
It can flood turf areas or cause dry spots in turf.
Question 35
Question
What is the main purpose of an isolation valve?
Question 36
Question
It is always a good idea to pay attention to the irrigation boxes before opening them to see if anything is living in them?
Question 37
Question
If a valve is not turning on with the controller and all of the point of connections are on, all the other valves are working properly and you're in front of the no working valve. what should be the first thing to check?
Answer
-
Check the diaphragm.
-
Check the solenoid.
-
Check the water input.
Question 38
Question
What could be the reasons why a diaphragm is not working and the water keeps seeping?
check all that apply.
Question 39
Question
AC & DC solenoids can be used in the same system.
Question 40
Question
Correctly name the following parts:
Answer
-
Wye strainer
-
Pressure regulator
-
PVC coupling
-
Solenoid
-
Wye strainer
-
Pressure regulator
-
Solenoid
-
PVC coupling
Question 41
Question
Correctly name the following parts:
Answer
-
Sprinkler
-
PVC Tee
-
Swing joint
-
Decoder
-
Filter
-
Sprinkler
-
PVC Tee
-
Swing joint
-
Decoder
-
Filter
-
Sprinkler
-
PVC Tee
-
Swing joint
-
Decoder
-
Filter
Question 42
Question
Correctly name the following parts:
Answer
-
Zone valve
-
Water meter
-
Backflow preventer
-
Wire toner
-
Zone valve
-
Water meter
-
Wire toner
-
Backflow preventer
Question 43
Question
While doing ohms testing on a solenoid, 20-60 ohms will mean everything is good.
Question 44
Question
Why is balancing an irrigation system important?
Question 45
Question
The purpose of an irrigator is to make repairs and leave the area as if no one was there.
Question 46
Question
When making PVC repairs is very important to:
Check all that apply.
Answer
-
Make straight cuts
-
Give the pipe a quarter turn right after gluing.
-
Wait 15-30 seconds after the quarter turn before letting the recently glued pipe go.
-
Let the repair cure for up to 12 hours before turning the water on.
-
Turn on the water immediately to check for leaks.
Question 47
Question
What is a Slip-fix?
Question 48
Question
Why is probing the soil so important?
Check all that apply.
Answer
-
To control the soil moisture and determine if adjustments in the irrigation system are needed.
-
To make sure the roots are getting water.
-
To make holes on the ground and help the roots.
-
Probing the soil is not really important.
Question 49
Question
It's always a good idea to run the system and walk the area to make sure everything is working properly.
Question 50
Question
Name the following parts correctly:
Answer
-
Multi-port emitters
-
Multiplying emitters
-
MP Rotors
-
Spaghetti connections
-
Multi-Port emitters
-
Single use emitters
-
Single emitter
-
Tree emitters
Question 51
Question
What does GPH stand for in irrigation?
Answer
-
Gallons Per Hour
-
Game Pack Holder
-
Grams Per Hour
-
Good Payment History