Question 1
Question
An SMP can be defined as a stand-alone computer system with two or more similar processors of comparable capability.
Question 2
Question
Over the years memory access speed has consistently increased more rapidly than processor speed.
Question 3
Question
The ___ chooses which block to replace when a new block is to be loaded into the cache and the cache already has all the slots filled with other blocks.
Answer
-
memory controller
-
mapping function
-
write policy
-
replacement algorithm
Question 4
Question
When an external device becomes ready to be serviced by the processor, the device sends a(n) ___ signal to the processor.
Answer
-
access
-
halt
-
handler
-
interrupt
Question 5
Question
The ____ holds the address of the next instruction.
Question 6
Question
Small, fast memory located between the processor and main memory is called ____.
Answer
-
Block memory
-
Cache memory
-
Direct memory
-
WORM memory
Question 7
Question
One mechanism Intel uses to make its caches more effective is _______.
Answer
-
mapping
-
handling
-
interconnecting
-
prefetching
Question 8
Question
In a uniprocessor system, multiprogramming increases processor efficiency by _____.
Answer
-
taking advantage of time wasted by long wait interrupt handling
-
disabling all interrupts execpt those of highest priority
-
eliminating all idle processor cycles
-
increasing processor speed
Question 9
Question
The processor controls the operation of the computer and performs its data processing functions.
Question 10
Question
Instruction processing consists of two steps:
Answer
-
fetch and execute
-
instruction and execute
-
instruction and halt
-
fetch and instruction
Question 11
Question
The ____ is the external data by which the OS is able to supervise and control the process.
Answer
-
execution context
-
associated data
-
executable program
-
nucleus
Question 12
Question
The processor itself is not a resource so the OS is not involved in determining how much of the processor time is devoted to the execution of a user.
Question 13
Question
Multiprogramming operating systems are fairly sophisticated compared to single-program or _____ systems.
Answer
-
time-sharing
-
uniprogramming
-
multitasking
-
memory management
Question 14
Question
Hardware features desirable in a batch-processing OS include memory protection, timer, privileged instructions and ______.
Answer
-
clock cycles
-
associated data
-
interrupts
-
kernels
Question 15
Question
• A common strategy to give each process in the queue some time in turn is referred to as a _____ technique.
Answer
-
multi-threading
-
serial processing
-
time slicing
-
round-robin
Question 16
Question
The technique where a system clock generates interrupts, and at each clock interrupt the OS regains control and assigns the processor to another user is _____.
Answer
-
clock cycle
-
time slicing
-
round-robin
-
multithreading
Question 17
Question
______ is where the OS must prevent independent processes from interfering with each other’s memory, both data and instructions.
Answer
-
Protection and access control
-
Support of modular programming
-
Process isolation
-
Automatic allocation and management
Question 18
Question
The phrase "control is passed to a job" means that the processor is now fetching and executing instructions from the monitor program.
Question 19
Question
The key to success of Linux has been its availability for free under the auspice of the _______.
Question 20
Question
Both batch processing and time-sharing use multiprogramming.
Question 21
Question
If a system does not employ virtual memory each process to be executed must be fully loaded into main memory.
Question 22
Question
It is the principal responsibility of the ____ to control the execution of processes.
Answer
-
OS
-
process control block
-
memory
-
dispatcher
Question 23
Question
The ____ is the less-privileged mode.
Answer
-
user mode
-
kernel mode
-
system mode
-
control mode
Question 24
Question
The portion of the operating system that selects the next process to run is called the ____.
Answer
-
trace
-
process control block
-
dispatcher
-
PSW
Question 25
Question
The collection of program, data, stack, and attributes is referred to as the ____.
Answer
-
process structure
-
process control block
-
process location
-
process image
Question 26
Question
A process in the [blank_start]ready[blank_end] state is in main memory and available for execution.
Question 27
Question
The process control block is the least important data structure in an OS.
Question 28
Question
When a process is in the ____ state it is in secondary memory but is available for execution as soon as it is loaded into main memory.
Answer
-
Blocked
-
Blocked/Suspend
-
Ready
-
Ready/Suspend
Question 29
Question
A total of ____ process states are recognized by the UNIX SVR4 operating system.
Question 30
Question
The principal function of the OS is to create, manage, and terminate processes.
Question 31
Question
In a multithreaded environment, a _____ is defined as the unit of resource allocation and a unit of protection.
Answer
-
strand
-
process
-
string
-
trace
Question 32
Question
_____ is a good example of an OS using a combined ULT/KLT approach.
Answer
-
TRIX
-
Windows
-
LINUX
-
Solaris
Question 33
Question
A ____ is a user-created unit of execution within a process.
Answer
-
Kernel
-
KLT
-
lightweight process
-
ULT
Question 34
Question
The _____ are the fundamental entities that can be scheduled and dispatched to run on one of the system processors.
Answer
-
Processes
-
Kernel threads
-
LWPs
-
ULTs
Question 35
Question
A ____ is a dispatchable unit of work that executes sequentially and is interruptible so that the processor can turn to another thread.
Answer
-
port
-
process
-
token
-
thread
Question 36
Question
A Windows process must contain at least ___ thread(s) to execute.
Question 37
Question
It takes less time to terminate a process than a thread.
Question 38
Question
The blocked state in which the process is waiting for an event, such as the end of an I/O operation, the availability of a resource, or a signal from another process is the ____ state.
Answer
-
Times and timers
-
Uninterruptible
-
Stopped
-
Interruptible
Question 39
Question
The ____ state is when the thread has terminated.
Question 40
Question
Any alteration of a resource by one thread affects the environment of the other threads in the same process.
Question 41
Question
As an extension of the principles of modular design and structured programming, some applications can be effectively programmed as a set of concurrent processes.
Question 42
Question
A situation in which a runnable process is overlooked indefinitely by the scheduler, although it is able to proceed, is _____.
Answer
-
mutual exclusion
-
deadlock
-
starvation
-
livelock
Question 43
Question
A semaphore that does not specify the order in which processes are removed from the queue is a _____ semaphore.
Answer
-
weak
-
general
-
strong
-
binary
Question 44
Question
A ____ is a data type that is used to block a process or thread until a particular condition is true.
Answer
-
deadlock
-
general semaphore
-
condition variable
-
mutex
Question 45
Question
The _____ is a programming language construct that provides equivalent functionality to that of semaphores and is easier to control.
Answer
-
atomic operation
-
co-routine
-
critical section
-
monitor
Question 46
Question
The requirement that when one process is in a critical section that accesses shared resources, no other process may be in a critical section that accesses any of those shared resources is ____.
Answer
-
critical section
-
linelock
-
mutual exclusion
-
atomic operation
Question 47
Question
The sharing of main memory among processes is useful to permit efficient and close interaction among processes because such sharing does not lead to any problems.
Question 48
Question
The case of cooperation by sharing covers processes that interact with other processes without being explicitly aware of them.
Question 49
Question
The management of multiple processes within a uniprocessor system is ___.
Question 50
Question
The term ____ refers to a technique in which a process can do nothing until it gets permission to enter its critical section but continues to execute an instruction or set of instructions that tests the appropriate variable to gain entrance.
Answer
-
spin waiting
-
general semaphore
-
critical resource
-
message passing
Question 51
Question
The most common technique used for protecting a critical section in Linux is the _____.
Answer
-
singal
-
atomic bitmap operation
-
atomic integer operation
-
spinlock
Question 52
Question
Interrupts, signals, messages, and information in I/O buffers are all example of reusable resources.
Question 53
Question
Requested resources are granted to processes whenever possible with _____.
Answer
-
deadlock detection
-
preemption
-
mutual exclusion
-
deadlock avoidance
Question 54
Question
The ____ allows multiple threads to have simultaneous read-only access to an object protected by the lock.
Answer
-
barrier
-
condition variable
-
readers/writer lock
-
mutex
Question 55
Question
Examples of ___ include processors, I/O channels, main and secondary memory, devices, and data structures such as files, databases, and semaphores.
Answer
-
regional resources
-
joint resources
-
reusable resources
-
consumable resources
Question 56
Question
A closed chain of processes exists, such that each process holds at least one resource needed by the next process in the chain is the condition of ____.
Answer
-
no preemption
-
mutual exclusion
-
circular wait
-
hold and wait
Question 57
Question
The strategy of deadlock ____ is to design a system in such a way that the possibility of deadlock is excluded.
Answer
-
prevention
-
detection
-
diversion
-
avoidance
Question 58
Question
One of the most significant contributions of UNIX to the development of operating systems is the ____.
Answer
-
semaphore
-
pipe
-
message
-
shared memory
Question 59
Question
Deadlock is permanent because none of the events are ever triggered.
Question 60
Question
The fastest form of inter-process communication provided in UNIX is ____.
Answer
-
shared memory
-
message
-
pipe
-
semaphore
Question 61
Question
In a multiprogramming system the available main memory is not generally shared among a number of processes.
Question 62
Question
A ____ is a particular example of logical addresses in which the address is expressed as a location relative to some known point, usually a value in a processor register.
Answer
-
logical address
-
relative address
-
absolute address
-
physical address
Question 63
Question
The page table for each process maintains ____.
Answer
-
the physical memory location of the process
-
the frame location for each page of the process
-
the page location for each frame of the process
-
the logical memory location of the process
Question 64
Question
In a system employing a segmentation scheme for memory management a process is divided into ___
Question 65
Question
Available chunks of memory are known as ____.
Answer
-
frames
-
segments
-
addresses
-
pages
Question 66
Question
In a multiprogramming environment the programmer knows at the time of coding how much space will be available and where that space will be.
Question 67
Question
In a system employing a segmentation scheme for memory management wasted space is due to _____.
Question 68
Question
In the Dynamic Partitioning technique of memory management, the placement algorithm that scans memory from the location of the last placement and choose the next available block that is large enough to satisfy the request is called _____>
Answer
-
next-fit
-
first-fit
-
last-fit
-
best-fit
Question 69
Question
In a system employing a paging scheme for memory management wasted space is due to _____.
Question 70
Question
One technique for overcoming external fragmentation is ____.
Answer
-
loading
-
compaction
-
relocation
-
partitioning
Question 71
Question
Segments may be of unequal, indeed dynamic, size.
Question 72
Question
A ____ is issued if a desired page is not in main memory.
Question 73
Question
The ____ determines when a page should be brought into main memory.
Answer
-
page fault
-
fetch policy
-
working set
-
resident set management
Question 74
Question
The ____ policy results in the fewest number of page faults.
Question 75
Question
The ____ algorithm requires a use bit to be associated with each page in memory.
Answer
-
page placement
-
working set
-
VSWS
-
page fault frequency
Question 76
Question
The ____ structure indexes page table entries by frame number rather than by virtual page number.
Answer
-
hash table
-
inverted page table
-
page table
-
segment table
Question 77
Question
The principle of locality states that program and data references within a process do not tend to cluster.
Question 78
Question
______ is transparent to the programmer and eliminates external fragmentation providing efficient use of main memory.
Answer
-
Hashing
-
Paging
-
Segemention
-
Thrashing
Question 79
Question
____ is a range memory addresses available to a process.
Answer
-
Address space
-
Real address
-
Virtual address
-
Virtual address space
Question 80
Question
____ allows the programmer to view memory as consisting of multiple address spaces.
Answer
-
Paging
-
Locality
-
Segmentation
-
Resident set managment
Question 81
Question
Which of the following scheduling policies allow the OS to interrupt the currently running process and move it to the Ready state?
Answer
-
FIFO
-
FCFS
-
non-preemptive
-
preemptive
Question 82
Question
The strategy that schedules processes based on their group affiliation is generally referred to as ______.
Answer
-
shortest process next
-
fair share scheduling
-
queuing analysis
-
simulation modeling
Question 83
Question
The ____ specifies the instants in time at which the selection function is exercised.
Answer
-
decision mode
-
medium-term scheduling
-
ready state
-
TAT
Question 84
Question
This is a decision whether to add a process to those that are at least partially in main memory and therefore available for execution.
Answer
-
short-term scheduling
-
long-term scheduling
-
medium-term scheduling
-
I/O scheduling
Question 85
Question
Typically, the swapping-in function for processes is based on the need to manage ____.
Question 86
Question
Response time in an interactive system is an example of:
Answer
-
user-oriented criteria for long-term scheduling policies
-
system-oriented criteria for short-term scheduling policies
-
system-oriented criteria for long-term scheduling policies
-
user-oriented criteria for short-term scheduling policies
Question 87
Question
A risk with ____ is the possibility of starvation for longer processes, as long as there is a steady supply of shorter processes.
Question 88
Question
First-come-first-served (FCFS) is a simple scheduling policy that tends to favor I/O bound processes over processor bound processes.
Question 89
Question
The traditional UNIX scheduler divides processes into fixed bands of priority levels, with the highest priority band being the ____.
Answer
-
user process band
-
swapper band
-
file manipulation band
-
utilization band
Question 90
Question
One problem with a pure priority scheduling scheme is that lower-priority processes may suffer starvation.
Question 91
Question
The multiprocessor system which consists of a set or processors that share a common main memory and are under the integrated control of an operation system is a _____.
Answer
-
tightly coupled multiprocessor
-
cluster
-
functionally specialized processor
-
loosely coupled or distributed multiprocessor
Question 92
Question
_____ perform static analysis of feasible schedules of dispatching with the result of the analysis being a schedule that determines, at run time, when a task must begin execution.
Answer
-
Static priority-driven preemptive approaches
-
Static table-drive approaches
-
Dynamic planning-based approaches
-
Dynamic best effort approaches
Question 93
Question
The basic idea of _____ is that a lower-priority task inherits the priority of any higher-priority task pending on a resource they share.
Question 94
Question
User control is a generally much broader in an ordinary operating system than in a real-time operating system.
Question 95
Question
With coarse and ____ grained parallelism, there is a synchronization among processes, but at a very gross level.
Answer
-
medium
-
fine
-
independent
-
very course
Question 96
Question
The ____ approach is a set of related threads scheduled to run on a set of processors at the same time, on a one-to-one basis.
Question 97
Question
The ____ class is intended for applications that will only consume processor time when no other threads are ready to execute.
Answer
-
idle user
-
time sharing
-
bottom-half kernel
-
real-time
Question 98
Question
______ is the time required to execute the task to completion.
Answer
-
Processing time
-
Priority
-
Resource requirements
-
Ready time
Question 99
Question
Processes at ____ priority levels are guaranteed to be selected to run before any time-sharing process but must defer to real-time processes.
Answer
-
kernel
-
time-sharing
-
real-time
-
load-sharing
Question 100
Question
With independent parallelism there is an explicit synchronization among processes.
Question 101
Question
The advantage of ____ is that it provides extremely high data availability.
Answer
-
RAID 2
-
RAID 4
-
RAID 0
-
RAID 6
Question 102
Question
On a movable-head system, the time it takes to position the head at the track is known as
Answer
-
access time
-
seek time
-
transfer time
-
rotational delay
Question 103
Question
The disk scheduling algorithm that implements two sub-queues in a measure to avoid the problem of "arm stickiness" is the ______.
Answer
-
C-SCAN policy
-
FSCAN policy
-
DMA
-
N-step-SCAN policy
Question 104
Question
_____ external devices are suitable for communicating with modems.
Answer
-
Human-readable
-
Application
-
Machine-readable
-
Communication
Question 105
Question
The simplest type of support that the operating system can provide is _____.
Answer
-
overflow buffering
-
dual buffering
-
single buffering
-
circular buffering
Question 106
Question
Cache memory reduces average memory access time by exploiting the principle of locality.
Question 107
Question
RAID 0 provides real-time backups of all data so that in the event of a disk failure, all of the critical data is still immediately available.
Question 108
Question
_____ is a technique that smooths out peaks in I/O demand.
Answer
-
Buffering
-
Blocking
-
Smoothing
-
Tracking
Question 109
Question
The _____ unit is capable of mimicking the processor and of taking over control of the system bus, just like a processor.
Answer
-
interrupt-driven I/O
-
I/O channel
-
direct memory access
-
programmed I/O
Question 110
Question
RAID 5 is organized in a similar fashion to _____, but is different in the fact that RAID 5 distributes the parity strips across all disks.
Answer
-
RAID 3
-
RAID 2
-
RAID 1
-
RAID 4
Question 111
Question
Typically, the only way that a user or application may access files is through the file management system.
Question 112
Question
_____ represents an open file associated with a process.
Answer
-
Dentry object
-
Inode object
-
File object
-
Superblock object
Question 113
Question
An objective of the ____ is to provide a standardized set of I/O interface routines to user processes.
Answer
-
working directory
-
file management system
-
indexed file allocation
-
file directory
Question 114
Question
The ____ is concerned with scheduling disk and tape access to optimize performance.
Answer
-
device driver
-
basic I/O supervisor
-
access method
-
logical I/O
Question 115
Question
The ____ file exploits the capability found on disks to access directly any block of a known address.
Answer
-
direct
-
sequential
-
indexed sequential
-
indexed
Question 116
Question
All types of UNIX files are administered by the OS by means of inodes.
Question 117
Question
The least-complicated form of file organization is the indexed file.
Question 118
Question
The ____ contains the core parts of the operating system, including system binaries, system libraries, and configuration files.
Answer
-
data directory
-
system directory
-
cache directory
-
mnt/sdcard directory
Question 119
Question
A ____ is a contiguous set of allocated blocks.
Answer
-
key
-
pathname
-
pile
-
portion
Question 120
Question
A ___ is the basic element of data.
Answer
-
database
-
field
-
file
-
record
Question 121
Question
General-purpose computer systems far outnumber embedded systems.
Question 122
Question
The ____ module contains the code necessary for processor startup, interrupt delivery, context switching, and other functionality specific to the instruction set architecture of that processor family.
Answer
-
Variant
-
Platform
-
Memory Management
-
Architechture
Question 123
Question
The ____ module includes code for startup, chip selection configuration, interrupt controllers, and timer devices.
Answer
-
Architechture
-
Variant
-
MMU
-
Platform
Question 124
Question
Configurability, direct use of interrupts, and real-time operation are some of the unique characteristics and design requirements for ______/
Question 125
Question
______ is one of the most widely used embedded operating systems.
Question 126
Question
A key differentiator between desktop/server and embedded Linux distributions is that desktop and server software are typically compiled on one platform but is intended to be executed on another.
Question 127
Question
The _____ interface allows the client to hold on to a resource until the client is notified that someone else needs the resource.
Answer
-
Resource configure
-
Resource requested
-
Resource
-
Resource-specific
Question 128
Question
A mutex is used to enforce mutually exclusive access to a resource, allowing only one thread at a time to gain access.
Question 129
Question
_____ has become a popular approach to implementing wireless sensor network software.
Answer
-
TinyOS
-
eCos
-
Embedded system
-
Arbiter
Question 130
Question
Virtual machines are made up of files.
Question 131
Question
The solution that enables virtualization is a ____.
Answer
-
round robin
-
virtual machine monitor
-
hyperfile
-
DalviB600
Question 132
Question
The ___ facilitates the translation and I/O from the virtual machine to the physical server devices.
Answer
-
hardware
-
memory
-
hypervisor
-
network interface card
Question 133
Question
_____ can power off and on physical hosts as they are needed.
Answer
-
DRS
-
Storage and Network I/O
-
DPM
-
Resource Scheduler
Question 134
Question
The number of guests that can exist on a single hosts is measured as a _____.
Answer
-
VMM ratio
-
hypervisor ration
-
broker ratio
-
consolidation ratio
Question 135
Question
The ____ approach is becoming a common way for businesses and individuals to deal with legacy applications and to optimize their hardware usage.
Answer
-
virtual machine
-
consolidation
-
ratio
-
round robin
Question 136
Question
Virtual machines are hosted via the infrastructure services in the VM kernel.
Question 137
Question
______ is a commercially available hypervisor from VMware that provides users a bare metal hypervisor to host virtal machines on their servers.
Question 138
Question
A key aspect of server virtualization is that VMs cannot be viewed as network resources.
Question 139
Question
The concept of ____, as used in Linux, refers to a partitioning of the privileges available to a root user.
Answer
-
root isolation
-
hosting platform
-
capabilities
-
processing isolation