4.6 Internal Combustion Engines

Descripción

power engineering 3b2 Test sobre 4.6 Internal Combustion Engines, creado por TRAVIS CANNING el 29/02/2016.
TRAVIS CANNING
Test por TRAVIS CANNING, actualizado hace más de 1 año
TRAVIS CANNING
Creado por TRAVIS CANNING hace más de 8 años
19
2

Resumen del Recurso

Pregunta 1

Pregunta
Superchargers are
Respuesta
  • Used to force more air-fuel mixture into the cylinder of a diesel engine
  • Used to force more air only to the cylinder of a gasoline engine
  • Usually of the rotary screw or the centrifugal type
  • used to increase power output
  • never used on gasoline engines

Pregunta 2

Pregunta
The pressure of the air at the end of the diesel compression stroke may be as high as:
Respuesta
  • 1000 kPa
  • 2000 kPa
  • 500 kPa
  • 4000 kPa
  • 5000 kPa

Pregunta 3

Pregunta
Scavenging is:
Respuesta
  • The supplying of air for combustion
  • The removal of exhaust gases from the cylinder
  • Used in all diesel engines
  • Usually used in four-stroke cycle engines
  • Re-circulation of exhaust gases to reduce emmisions

Pregunta 4

Pregunta
In a closed-cooling system for an internal combustion engine the:
Respuesta
  • Pump takes suction directly from the engine
  • Pump is on the low temperature side of the engine
  • Expansion tank is on the water supply side of the engine
  • Cooling water is circulated intermittently
  • Radiator is between the pump discharge and the engine

Pregunta 5

Pregunta
Solid fuel injection systems on IC engines may use which of the following designs or variations: 1. Individual pump 2. Air injection 3. Distributor 4. Common rail
Respuesta
  • 1,2,3
  • 2,3,4
  • 1,2,4
  • 1,3,4
  • 1,2,3,4

Pregunta 6

Pregunta
In the distributor system for the injection of fuel into a diesel cylinder:
Respuesta
  • Two pumps are used
  • One common pump is used
  • One pump is used for each cylinder
  • Only a metering pump is used
  • Pumps are not required

Pregunta 7

Pregunta
The wet type of cylinder liner is:
Respuesta
  • Water cooled
  • Oil cooled
  • Made of white metal
  • Submerged partly in oil
  • Filled with water

Pregunta 8

Pregunta
The camshaft in an internal combustion engine is driven by a/an:
Respuesta
  • Rocker arm
  • Electric motor
  • Connecting rod
  • Chain or belt
  • Hydraulic pump

Pregunta 9

Pregunta
A magneto ignition system:
Respuesta
  • Does not require a coil
  • Produces AC power
  • Produces a hotter spark at high speeds
  • Does not require points
  • Does not require a condenser

Pregunta 10

Pregunta
The pressure at the discharge of a supercharger may be as high as:
Respuesta
  • 100 kPa
  • 120 kPa
  • 10 kPa
  • 30 kPa
  • 140 kPa
Mostrar resumen completo Ocultar resumen completo

Similar

Latín - Vocabulario Básico
maya velasquez
ANATOMÍA TOPOGRÁFICA DEL ABDÓMEN
Marcela Pazmiño
Cabeza y cuello
maca.s
LA BELLE EPOQUE
fer.sagredo
Anatomía cabeza
Diego Santos
MAPAS CONCEPTUALES DIGITALES
carolinaordonezm
PAST SIMPLE
almajannette.soa
MAPA CONCEPTUAL DE NETIQUETA
Hayler Narvaez
MAPA CONCEPTUAL CAP 1 GERENCIA ESTRATEGICA
DAVID ARCE
Teoría ética de Aristóteles.
leiby johana briñez contreras