5134922
Descripción
Test por james crowley, actualizado hace más de 1 año
|
Creado por james crowley
hace más de 8 años
|
|
Pregunta 1
Pregunta
Wet abrading is carried out on which type of ground coating?
Respuesta
-
a Acrylic borne eggshell.
-
b Oil borne eggshell.
-
c Powdered filler.
-
d Flexible filler.
Pregunta 2
Pregunta
What is the most suitable acrylic borne coating to use as a ground coat when applying a
water borne system?
Respuesta
-
a Gloss.
-
b Eggshell.
-
c Emulsion.
-
d Undercoat.
Pregunta 3
Pregunta
Which of the following can cause bittiness to decorative work?
Respuesta
-
a Uneven colour.
-
b Uneven application.
-
c Insufficient material.
-
d Insufficient preparation.
Pregunta 4
Pregunta
What is the correct way to lay off a solvent borne eggshell ground coat on a wall?
Respuesta
-
a Crisscross.
-
b Vertically.
-
c Arching.
-
d Horizontally.
Pregunta 5
Pregunta
What is the main benefit of using a stipple brush on ground coats?
Respuesta
-
a It makes the application faster.
-
b It reduces the drying time.
-
c It removes brush marks.
-
d It deepens the colour
Pregunta 6
Pregunta
What material is mixed with a glaze to produce a scumble?
Respuesta
-
a Oil.
-
b Spirit.
-
c Water.
-
d Colourant
Pregunta 7
Pregunta
What tool is used to create a soft appearance on a glazed surface?
Respuesta
-
a Natural sponge.
-
b Mohair roller.
-
c Stipple brush.
-
d Chamois leather.
Pregunta 8
Pregunta
Other than boots and overalls, which PPE should be worn when applying broken colour
effect?
Respuesta
-
a Mask.
-
b Gloves.
-
c Goggles.
-
d Ear plugs.
Pregunta 9
Pregunta
Which of the following describes a glaze?
Respuesta
-
a A material used to extend the drying time in paint.
-
b One of the additives that make up a scumble.
-
c A material used to make up a stencil.
-
d An additive that makes up a primer.
Pregunta 10
Pregunta
Which material is used to extend the drying time in oil borne scumble?
Respuesta
-
a White spirit.
-
b Linseed oil.
-
c Colourant.
-
d Glaze.
Pregunta 11
Pregunta
What will cause yellowing to broken colour after a period of time?
Respuesta
-
a Lack of light.
-
b Lack of spirit.
-
c Lack of scumble.
-
d Lack of colourant
Pregunta 12
Pregunta
Why should more scumble than needed be mixed together for a piece of work?
Respuesta
-
a To save time.
-
b To repair damage.
-
c To allow for spillages.
-
d To prepare for the next job
Pregunta 13
Pregunta
Adding thinners to the scumble will alter the effect by
Respuesta
-
a adding shine
-
b darkening
-
c yellowing
-
d lightening.
Pregunta 14
Pregunta
Which of the following describes a substrate that allows light to pass through but cannot
be seen through?
Respuesta
-
a Translucent.
-
b Reflective.
-
c Transparent.
-
d Opaque.
Pregunta 15
Pregunta
When rag rolling what application fault is caused by not overlapping the pattern?
Respuesta
-
a Creeping.
-
b Skidding.
-
c Bleeding.
-
d Banding
Pregunta 16
Pregunta
How can skidding be prevented?
Respuesta
-
a Keeping a wet edge going.
-
b Crossing over when ragging.
-
c Using the correct ground coat.
-
d Mixing the correct ratio of materials
Pregunta 17
Pregunta
What would happen if incorrect tape is used when masking?
Respuesta
-
a Uneven edges.
-
b Crisp edges.
-
c Bleeding.
-
d Creepage.
Pregunta 18
Pregunta
Damage to surface when removing masking tape is mainly caused by
Respuesta
-
a incorrect tape choice
-
b pulling the tape off slowly
-
c reducing the tackiness of the tape
-
d pulling the tape towards the surface.
Pregunta 19
Pregunta
What is the correct process when cleaning chamois leathers?
Respuesta
-
a Wash, fold, store.
-
b Dry, fold, store.
-
c Wash, dry, store.
-
d Hang, dry, store.
Pregunta 20
Pregunta
How should brushes be stored after cleaning to allow for drying?
Respuesta
-
a Hung in ventilated area.
-
b Hung up in a cupboard.
-
c Laid on a bench.
-
d Laid in a box.
Pregunta 21
Pregunta
What type of stencil is cut out and paint applied over the opening shown in the image?
Respuesta
-
a Positive.
-
b Multi.
-
c Plate.
-
d Negative
Pregunta 22
Pregunta
When carrying out stencil work in a room the focal point is most likely to be a
Respuesta
-
a chimney breast
-
b wall with a door
-
c window wall
-
d corner.
Pregunta 23
Pregunta
What is the main purpose of registration marks?
Respuesta
-
a To find the centre.
-
b To keep the stencil level.
-
c To identify the starting point.
-
d To identify the finishing point
Pregunta 24
Pregunta
Why should low tack tape be used to secure stencil plates?
Respuesta
-
a To prevent buckling.
-
b To prevent creeping.
-
c To prevent uneven colour.
-
d To prevent surface damage.
¿Quieres crear tus propios Tests gratis con GoConqr? Más información.