Creado por Daniel Rodriguez
hace alrededor de 6 años
|
||
Pregunta | Respuesta |
Bulkhead (Header board) is PMS, CBB, no holes or missing rivets. | |
Frame rails are PMS, CBB. Cross Members are PMS, CBB, no missing cross members. | |
Landing gear is PMS, CBB, fully raised, crank handle is secured. | |
Tandem frame and tandem release is PMS, CBB, release handle & locking pins are in the fully locked position. | |
Spring mount | Spring mount is PMS at both ends, CBB (Make sure to check/point front and rear) |
Spring arm | Spring arm is PMS at both ends, CBB |
Torque arm | Torque arm is PMS at both ends, CBB |
Brake chamber & hose. | Brake chamber & hose are PMS, CBB, not leaking. Hose are PMS, ABC, not leaking. |
Trailer slack adjuster & push rod are PMS, CBB ."With the brakes release and pulled by hand the push rod should not move more than 1 inch" | |
Trailer air bag is PMS at both ends, CBB, ABC, not leaking air, no missing mounting bolts. | |
Trailer Shock absorber is PMS at both ends, CBB, not leaking. | |
Brake drum is PMS, CBB | |
Brake lining is PMS, CBB, no oil or debris, friction material is not worn dangerously thin. | |
Trailer tire | Trailer tire is PMS, ABC to tread or sidewalls, no less than 2/32" tread left, air pressure is filled to factory specs and I would use a tire gauge to check that. Dual tires are evenly spaced and free of debris. |
Rim | Rim is PMS, CBB, no illegal welds. |
Lug nuts | Lug nuts are all PMS, CBB, none missing, no rust trails or powder residue, no cracks around the bolt holes. |
Trailer axle seal is PMS, CBB, filled to factory specs, not leaking. | |
Mud flaps | Mud flaps are PMS, CBB |
Doors | Doors are PMS, CBB, open and closes and latches properly |
Door hinges | Door hinges are PMS, CBB |
Door seal | Door seal is PMS, not worn, torn or dry rotted. |
¿Quieres crear tus propias Fichas gratiscon GoConqr? Más información.