13482574
Descrição
Quiz por james crowley, atualizado more than 1 year ago
|
Criado por james crowley
mais de 6 anos atrás
|
|
Questão 1
Questão
Knots in timber if left untreated could result in
Responda
-
a cissing of the paint film
-
b chalking of the paint film
-
c discolouration of the paint film
-
d flaking of the paint film.
Questão 2
Questão
The term porosity in relation to timber refers to its
Responda
-
a cost
-
b lifespan
-
c hardness
-
d absorbency.
Questão 3
Questão
Which of the following is a suitable primer for both resinous timbers and bitumen-coated
surfaces?
Responda
-
a Acrylic primer.
-
b Aluminium primer.
-
c Zinc-rich primer.
-
d Etch primer.
Questão 4
Questão
Which abrasive is used to abrade new wood before painting?
Responda
-
a grade 240 garnet paper
-
b coarse emery cloth
-
c grade 240 aluminium oxide
-
d medium glasspaper.
Questão 5
Questão
Which of the following is a solvent-borne primer suitable for timber?
Responda
-
a Zinc chromate primer.
-
b Alkali-resisting primer.
-
c Zinc-rich primer.
-
d Lead-free primer.
Questão 6
Questão
What is the iron content of non-ferrous metal?
Responda
-
a 0% iron content.
-
b 10% iron content.
-
c 40% iron content.
-
d 60% iron content.
Questão 7
Questão
Which of the following is created at the production stage of steel beams and girders?
Responda
-
a Flaking.
-
b Rust.
-
c Pitting.
-
d Millscale.
Questão 8
Questão
A primer appropriate for non-ferrous metal is
Responda
-
a alkali-resisting
-
b red oxide
-
c acrylic primer
-
d etch primer.
Questão 9
Questão
Open joints are a defect likely to be found in
Responda
-
a blockwork
-
b brickwork
-
c gypsum plaster
-
d plasterboard.
Questão 10
Questão
Chemically inactive materials are said to be
Responda
-
a alkaline
-
b acidic
-
c inert
-
d adhesive.
Questão 11
Questão
Dry lining is suitable for use as
Responda
-
a a load-bearing wall
-
b a load-bearing beam
-
c an external surface finish
-
d an internal surface finish.
Questão 12
Questão
Failure to remove old peeling coatings prior to repainting could result in
Responda
-
a bleaching
-
b chalking
-
c flaking
-
d wrinkling.
Questão 13
Questão
The correct method of removing paint coatings from a window frame is by
Responda
-
a steam stripping
-
b electric hot-air
-
c LPG burning off
-
d liquid paint-removal.
Questão 14
Questão
A hazard which could arise from the use of a steam stripper is
Responda
-
a scalding
-
b asphyxia
-
c radiation
-
d deafness.
Questão 15
Questão
When removing old paper, it must be allowed to soak so that it
Responda
-
a can be removed in several stages
-
b can be removed in one piece
-
c hardens and can be easily removed
-
d softens and can be easily removed.
Questão 16
Questão
The correct method of removing paper contaminated with mould is by
Responda
-
a abrading and washing
-
b washing and scratching
-
c washing and scraping
-
d burning off and washing.
Questão 17
Questão
At the end of the working day where should Personal Protective Equipment (PPE) be
stored?
Responda
-
a In the workshop, clearly marked, with unrestricted access for public and employees.
-
b In the workshop, clearly marked, accessed only by a first aider.
-
c In a designated area, clearly marked, with restricted access for employees only.
-
d In a designated area, clearly marked, with unrestricted access for public and employees.
Questão 18
Questão
Multi-coloured spots or patches on defective surfaces are known as
Responda
-
a grease contamination
-
b efflorescence
-
c moss and lichen
-
d mould and fungi.
Questão 19
Questão
Crystaline salts on an alkaline surface is known as
Responda
-
a cissing
-
b efflorescence
-
c fungi
-
d saponification.
Questão 20
Questão
Removing dirt and dust with a tack-rag prior to painting will avoid
Responda
-
a saponification
-
b discolouration
-
c bittiness
-
d effloescence.
Questão 21
Questão
The test to determine if a surface coating is either acrylic or solvent-borne, is known as a
Responda
-
a mastic test
-
b moisture test
-
c litmus test
-
d meths test.
Questão 22
Questão
Bleeding on a painted timber surface can be caused by
Responda
-
a painting knotty or resinous woods
-
b paint being deficient in binder
-
c painting over greasy surfaces
-
d painting over powdery surfaces.
Questão 23
Questão
Flaking on a non-ferrous metal surface can be caused by the use of the incorrect
Responda
-
a roller
-
b primer
-
c filler
-
d mordant.
Questão 24
Questão
Plaster cracks caused by material drying out after completion are known as
Responda
-
a settlement
-
b expansion
-
c shrinkage
-
d shearing.
Questão 25
Questão
Which of the following is the correct sequence for repairing cracks in plaster?
1 Undercutting.
2 Dry Abrading.
3 Raking out.
4 Proud filling.
5 Wetting in.
Responda
-
a 1, 3, 5, 4, 2
-
b 5, 3, 1, 4, 2
-
c 3, 1, 5, 4, 2
-
d 3, 1, 5, 2, 4
Questão 26
Questão
One possible effect of heat on plaster is the formation of
Responda
-
a blisters on the surface
-
b fungi on the surface
-
c deep cracks
-
d hairline cracks.
Questão 27
Questão
Which of the following would be most suitable for making good screw holes in oak
skirting?
Responda
-
a Plastic wood.
-
b Cement-based filler.
-
c Caulk.
-
d Powdered filler
Questão 28
Questão
The correct abrasive to use when making good open grained timber is
Responda
-
a emery cloth
-
b aluminium oxide
-
c silicone carbide
-
d wire wool.
Questão 29
Questão
Which tool is used to apply stoppers to small holes and cracks?
Responda
-
a Palette knife.
-
b Putty knife.
-
c Hacking knife.
-
d Filling knife.
Questão 30
Questão
Which of the following is applied using a caulking gun?
Responda
-
a Flexible filler.
-
b Powdered filler.
-
c Interior filler.
-
d Ready-mixed filler.
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.