Questão 1
Questão
What sort of lead does a microphone use?
Questão 2
Questão
What does the 'U' stand for on the mixer?
Responda
-
Unitary
-
Unlimited
-
Unlikeable
-
Unstoppable
Questão 3
Questão
Before you plug anything in, what positions should be the faders be at?
Responda
-
In the middle
-
All the way down
-
All the way up
Questão 4
Questão
When turning on your system, what should be turned on LAST?
Questão 5
Questão
There are two different types of microphone. What are they?
Responda
-
Conductor
-
Condensor
-
Circuit
-
Dynamic
-
Live
-
Electro
Questão 6
Questão
Turning up the microphone too loud will result in feedback, if amplified through the speakers
Questão 7
Questão
What does this button do in Cubase?
Questão 8
Questão
What sort of level should be aiming at the highest when recording?
Responda
-
No higher than -48
-
No higher than -36
-
No higher than -24
-
No higher than -12
-
No higher than 0
Questão 9
Questão
What is the main difference between a mic and a line signal?
Responda
-
Mic signals are strong, line signals are weaker
-
Line signals are stronger, mic signals are weaker
-
There is no difference
Questão 10
Questão
What controls the amount of sound coming into the audio interface?
Responda
-
The volume of the singer
-
The noise level outside
-
The input gain
-
The channel fader
Questão 11
Questão 12
Questão
What sort of track is used to record your sound into Cubase?
Responda
-
Audio track
-
FX track
-
Instrument track
Questão 13
Questão
Which one of these is NOT a real effect?
Responda
-
Reverb
-
Delay
-
Distortion
-
Filter
-
Flanger
-
Fader
Questão 14
Questão
What sort of signal do you need to record a microphone?
Questão 15
Responda
-
A echo, where the sound bounces straight back at you
-
A simulation of a space, such as a church or hall
-
An effect that gets rid of certain frequencies
Questão 16
Questão
What does the red record button do on the channel strip in Cubase?
Questão 17
Questão
What level should the faders be at while recording?
Responda
-
Up full
-
Down to the bottom
-
At '0' or 'U'
Questão 18
Questão
If you cannot hear your sound, what would you NOT do?
Responda
-
Look at the meters to see if the sound is coming in
-
Check all cable connections carefully
-
Turn everything up full
-
Adjust the input gain and see if anything changes with that
Questão 19
Questão
How many clicks do you get as a pre-count?
Questão 20
Questão
How do we change the tempo in Cubase?