4.6 Internal Combustion Engines

Descrição

power engineering 3b2 Quiz sobre 4.6 Internal Combustion Engines, criado por TRAVIS CANNING em 29-02-2016.
TRAVIS CANNING
Quiz por TRAVIS CANNING, atualizado more than 1 year ago
TRAVIS CANNING
Criado por TRAVIS CANNING mais de 8 anos atrás
19
2

Resumo de Recurso

Questão 1

Questão
Superchargers are
Responda
  • Used to force more air-fuel mixture into the cylinder of a diesel engine
  • Used to force more air only to the cylinder of a gasoline engine
  • Usually of the rotary screw or the centrifugal type
  • used to increase power output
  • never used on gasoline engines

Questão 2

Questão
The pressure of the air at the end of the diesel compression stroke may be as high as:
Responda
  • 1000 kPa
  • 2000 kPa
  • 500 kPa
  • 4000 kPa
  • 5000 kPa

Questão 3

Questão
Scavenging is:
Responda
  • The supplying of air for combustion
  • The removal of exhaust gases from the cylinder
  • Used in all diesel engines
  • Usually used in four-stroke cycle engines
  • Re-circulation of exhaust gases to reduce emmisions

Questão 4

Questão
In a closed-cooling system for an internal combustion engine the:
Responda
  • Pump takes suction directly from the engine
  • Pump is on the low temperature side of the engine
  • Expansion tank is on the water supply side of the engine
  • Cooling water is circulated intermittently
  • Radiator is between the pump discharge and the engine

Questão 5

Questão
Solid fuel injection systems on IC engines may use which of the following designs or variations: 1. Individual pump 2. Air injection 3. Distributor 4. Common rail
Responda
  • 1,2,3
  • 2,3,4
  • 1,2,4
  • 1,3,4
  • 1,2,3,4

Questão 6

Questão
In the distributor system for the injection of fuel into a diesel cylinder:
Responda
  • Two pumps are used
  • One common pump is used
  • One pump is used for each cylinder
  • Only a metering pump is used
  • Pumps are not required

Questão 7

Questão
The wet type of cylinder liner is:
Responda
  • Water cooled
  • Oil cooled
  • Made of white metal
  • Submerged partly in oil
  • Filled with water

Questão 8

Questão
The camshaft in an internal combustion engine is driven by a/an:
Responda
  • Rocker arm
  • Electric motor
  • Connecting rod
  • Chain or belt
  • Hydraulic pump

Questão 9

Questão
A magneto ignition system:
Responda
  • Does not require a coil
  • Produces AC power
  • Produces a hotter spark at high speeds
  • Does not require points
  • Does not require a condenser

Questão 10

Questão
The pressure at the discharge of a supercharger may be as high as:
Responda
  • 100 kPa
  • 120 kPa
  • 10 kPa
  • 30 kPa
  • 140 kPa

Semelhante

Plano de Estudo - Semana 1
Alessandra S.
Conteúdo Geral Edital - Auditor Fiscal - Receita Federal
Alessandra S.
DIREITOS E DEVERES INDIVIDUAIS E COLETIVOS #1
Eduardo .
Calendário de Estudos ENEM 2014
Alessandra S.
Direito Previdenciário
Taty Tesch
Literatura - Gêneros Literários e seus Estilos
Lucas da Costa
Citologia
Thamy Procopio
Direito do Trabalho - Relação de Trabalho e Relação de Emprego
Jacson Costa
Princípios Fundamentais
Lavs Agah
CONSTITUIÇÃO
Mateus de Souza