Copy and Edit

Construction Documents & Schematic Design

Description

NCIDQ Interior Design Quiz on Construction Documents & Schematic Design, created by Meagan Miserak on 09/01/2018.
Meagan Miserak
Quiz by Meagan Miserak, updated more than 1 year ago
Meagan Miserak
Created by Meagan Miserak almost 8 years ago
10
0
0

Resource summary

Question 1

Question
All of the following are true about reflected ceiling plans EXCEPT?
Answer
  • Shows a view of the ceiling as though it were reflected onto a mirror on the floor
  • Shows partitions that extend to the ceiling and those that extend through the ceiling
  • Shows power sources and outlets
  • Shows ceiling materials

Question 2

Question
When are mechanical, electrical, and plumbing details developed and coordinated with the interior drawings?
Answer
  • Preliminary design to prevent conflicts
  • For presentation to show the client that the design solution will "work"
  • During construction drawings
  • During design development

Question 3

Question
Specifications are made most concise by..
Answer
  • Using descriptive specs
  • Using reference standard specs
  • Using phrases instead of complete sentences
  • Avoiding the use of works like a, the, and all

Question 4

Question
According to standard drawing convention, how would a set of construction drawings produced by an interior designer be organized?
Answer
  • Title and index, fire protection drawings, mechanical, electrical, floor plans, reflected ceiling plans, elevations, details
  • title and index, architectural, electrical, fire protection, interiors, mechanical, plumbing, structural
  • Title and index, architectural, interiors, mechanical, electrical, structural, plumbing, fire protection
  • Title and index, floor plans, reflected ceiling plans, elevations, details, mechanical, electrical, fire protection

Question 5

Question
Which type of specification is a statement setting criteria and results required for the item being specified?
Answer
  • Performance Specification
  • Base-bid specification
  • Reference standard specification
  • Technical specification

Question 6

Question
Which of the following is the best way to show finish placement for a project with spaces that have 2 finishes, such as paint and wallcovering?
Answer
  • Schedule a meeting to walk through the finishes with the general contractor
  • Use wall finish tag symbols that coordinate with the schedule
  • Use a finish schedule and label the finishes N, S, E, W on the plan
  • Use a combination of lines, symbols, and elevations on a finish plan

Question 7

Question
In which type of drawing would you NEVER find furniture?
Answer
  • Reflected ceiling plan
  • Parti drawing
  • Section
  • Elevation

Question 8

Question
Which plan is sometimes aligned with the electrical and power/communication plans, because the exact location of many of these outlets is directly related?
Answer
  • Accessories
  • Furniture
  • Furnishings
  • Finishes

Question 9

Question
Which type of schedule would be LEAST likely to be found in a set of interior design drawings?
Answer
  • Window schedule
  • Millwork schedule
  • Equipment schedule
  • Finish schedule

Question 10

Question
Which type of drawing meets the requirements of either design intent, constraints, function, or constructability?
Answer
  • RCP
  • Section
  • Detail drawing
  • Shop drawing

Question 11

Question
Which of the following would NOT typical be the responsibility of the interior designer to show on a Reflected Ceiling Plan?
Answer
  • Height of dados and ceiling finishes
  • Exit signs and sprinkler locations
  • Full height wall partitions extending through the plenum to the concrete slab above
  • Switching and circuiting for lighting fixtures

Question 12

Question
Which of the following would an interior designer put into a schedule?
Answer
  • Hardware
  • Door/Window
  • Finish
  • All of the above

Question 13

Question
Which is the best lighting system to use in a graphic designer's office if the designer's goal is to provide a flexible and cost effective lighting system that creates a pleasant work environment?
Answer
  • Direct/Indirect
  • Task/Ambient
  • Recessed
  • Indirect

Question 14

Question
All of the following are true about wood structural systems EXCEPT?
Answer
  • Typically not used in residential construction
  • Is strong in both compression and tension
  • Typically used in small commercial construction
  • Is inexpensive and plentiful

Question 15

Question
What is NOT allowed in a return-air plenum?
Answer
  • Water supply pipes
  • Wood blocking
  • Electrical cable
  • Fire dampers

Question 16

Question
Which would you use to separate a building into 2 different construction types?
Answer
  • Fire barrier
  • Fire partition
  • 2 hour fire rated partition
  • Firewall

Question 17

Question
___________ Loads in a building are the permanent material weights of the building components, equipment, and other fixed elements.
Answer
  • Gravity
  • Dead
  • Dynamic
  • Horizontal

Question 18

Question
Which ceiling system would you use to accommodate acoustic ceiling tile, light fixtures, supply and return air grilles, fire sprinklers, and partitions attached in a consistent, unified way?
Answer
  • Suspended ceiling
  • demountable ceiling system
  • Grid ceiling system
  • Integrated ceiling system

Question 19

Question
Which of the following is true about solid-core doors?
Answer
  • Used as acoustical barriers
  • Are made with a variety of core types depending on the functional requirements of the door
  • All of these are true
  • Available with fire ratings of 20 minutes, 45 minutes, and 90 minutes

Question 20

Question
Which of the following would be used to improve the acoustical properties of a wall by isolating the wallboard from rigid attachment to framing?
Answer
  • Resilient channels
  • Wood furring strips
  • Insulation
  • Hat shaped furring channels

Question 21

Question
Which Is the best method to minimize noise and acoustic problems when planning a space?
Answer
  • Maximize common wall contact between spaces
  • Use acoustic ceiling tile
  • Stagger the placement of doorways
  • Use white noise to mask unwanted sounds

Question 22

Question
Which of the following would you most likely find on a reflected ceiling plan?
Image:
Symbols (binary/octet-stream)
Answer
  • A
  • B
  • C
  • D

Question 23

Question
Which scale would you typically draw small and complex construction details in?
Answer
  • 1/2"=1'0"
  • 3"=1'0"
  • 3/16"=1'0"
  • 1/8"=1'0"

Question 24

Question
The dotted line in the exhibit shown below allocates:
Image:
Dotted Line (binary/octet-stream)
Answer
  • Full height partitioning
  • Existing construction to be removed
  • Demising wall partition
  • Awning windows

Question 25

Question
In the exhibit, the top number inside each symbol refers to what in a set of working construction documents?
Image:
Line (binary/octet-stream)
Answer
  • Indicates the sequential drawing number
  • Indicates the drawing sheet
  • Indicates the amount of views are shown
  • Indicates the number of drawings included

Question 26

Question
In the following door schedule, the frame of door 108A is made of what material?
Image:
Schedule (binary/octet-stream)
Answer
  • Steel
  • Existing
  • Aluminum
  • Hollow metal

Question 27

Question
What would be the best scale to use if you were drawing a very complex elevation?
Answer
  • 1/4"=1:50
  • 1/2"=1:20
  • 1 1/2"=1:100
  • 3"=1:5

Question 28

Question
Which of the following hatch patterns represent batt insulation in a wall type?
Image:
Insulation (binary/octet-stream)
Answer
  • A
  • B
  • C
  • D

Question 29

Question
Which of the following scales should NEVER be used for interior design construction drawings?
Answer
  • 1"=1'0"
  • 3/16"=1'0"
  • 1/8"=1'0"
  • 3/4"=1'0"

Question 30

Question
Water conservation is a primary goal for the current project that you are working on. You could use all of the following to reach this goal EXCEPT..
Answer
  • Use high efficiency toilets
  • Appropriate plant selection
  • Increase the use of potable(drinkable) water
  • Use low flow shower heads and faucets

Question 31

Question
Choose all that are components of the programming report
Answer
  • Programming concepts
  • Appendices
  • Executive summary
  • Goals and objectives of report
  • Summary of space needs
  • Space adjacencies
  • Code requirements
  • Design concept
  • Analysis of existing space
  • Budget and schedule requirements
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

ART NOUVEAU
Britknee52
IDFX Flashcards
Brittany Kelly
Green Cards
Brittney Andrews
Chapter 2 - Schematic Design
Rianna Straw
Eco Solvent Printing %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
Eco Solvent Printing %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
LED Boards %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
Fabric Boards %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
Interior Design %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
Flex printing %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
Fabric Boards %% 9871585333 %% Complete Solution of Advertising
Nitin Kumar Srivastav
Browse Library