Question 1
Question
What sort of lead does a microphone use?
Question 2
Question
What does the 'U' stand for on the mixer?
Answer
-
Unitary
-
Unlimited
-
Unlikeable
-
Unstoppable
Question 3
Question
Before you plug anything in, what positions should be the faders be at?
Answer
-
In the middle
-
All the way down
-
All the way up
Question 4
Question
When turning on your system, what should be turned on LAST?
Question 5
Question
There are two different types of microphone. What are they?
Answer
-
Conductor
-
Condensor
-
Circuit
-
Dynamic
-
Live
-
Electro
Question 6
Question
Turning up the microphone too loud will result in feedback, if amplified through the speakers
Question 7
Question
What does this button do in Cubase?
Question 8
Question
What sort of level should be aiming at the highest when recording?
Answer
-
No higher than -48
-
No higher than -36
-
No higher than -24
-
No higher than -12
-
No higher than 0
Question 9
Question
What is the main difference between a mic and a line signal?
Answer
-
Mic signals are strong, line signals are weaker
-
Line signals are stronger, mic signals are weaker
-
There is no difference
Question 10
Question
What controls the amount of sound coming into the audio interface?
Answer
-
The volume of the singer
-
The noise level outside
-
The input gain
-
The channel fader
Question 11
Question
What does EQ do?
Question 12
Question
What sort of track is used to record your sound into Cubase?
Answer
-
Audio track
-
FX track
-
Instrument track
Question 13
Question
Which one of these is NOT a real effect?
Answer
-
Reverb
-
Delay
-
Distortion
-
Filter
-
Flanger
-
Fader
Question 14
Question
What sort of signal do you need to record a microphone?
Question 15
Answer
-
A echo, where the sound bounces straight back at you
-
A simulation of a space, such as a church or hall
-
An effect that gets rid of certain frequencies
Question 16
Question
What does the red record button do on the channel strip in Cubase?
Question 17
Question
What level should the faders be at while recording?
Answer
-
Up full
-
Down to the bottom
-
At '0' or 'U'
Question 18
Question
If you cannot hear your sound, what would you NOT do?
Answer
-
Look at the meters to see if the sound is coming in
-
Check all cable connections carefully
-
Turn everything up full
-
Adjust the input gain and see if anything changes with that
Question 19
Question
How many clicks do you get as a pre-count?
Question 20
Question
How do we change the tempo in Cubase?