Criado por Wagner Ramirez
aproximadamente 7 anos atrás
|
||
Questão | Responda |
Ethernet and IEE | Is an entire family of standards usually include the number 802.3. IEEE is the Institute of Electrical and Electronics Engineers |
Ethernet Frame | An Ethernet Frame has a header and a trailer. The header goes from the Preamble to the Typ. The trailer is made up by the FSC only. |
What is the IEEE standard name for Ethernet? | 10BASE-T 10 Mbps 100 M 802.3 |
What is the IEEE standard name for Fast Ethernet? | 100BASE-T 100 m 100Mbs 802.3u |
What is the IEEE standard name for Gigabit Ethernet over Fiber? | 1000BASE LX 1000 Mbs 5000m Fiber 802.3z The "L" is for light=Fiber |
What is the IEEE standard name for Gigabit Ethernet? | 1000Base-T 1000Mbs 100 m Copper 802.3ab |
What is the key know whether to use a Cross-over or Straight-Through cable? | A. Crossover cable: If the endpoints transmit on the same pin pair Crossover B. Straight-through cable: If the endpoints transmit on different pin pairs Straight Through |
Which one are the most common pin configuration for networking devices? | |
Mac Address | Media Access Control: The first 24 bits are OUI Organizationally Unique and the others 24 bits Vendor Assigned |
Unicast Address | Address used to Identify a unique device |
Broadcast address | Address used to Identify a group of devices |
Mutticast Address | Address use to identify an specific group of devices |
Which layer of the OSI Reference Model defines end-to-end delivery of packets? | The Network layer:The similarly-named TCP/IP Network Interface layer, also called the Network Access layer, defines the lowest layer of the TCP/IP model when it is shown as a 4-layer model |
Quer criar seus próprios Flashcards gratuitos com GoConqr? Saiba mais.