12268315
Descrição
Quiz por Kaitlyn Hickey, atualizado more than 1 year ago
|
Criado por Kaitlyn Hickey
quase 7 anos atrás
|
|
Questão 1
Questão
Suitable brush pressure for DC generators is usually between_____
Responda
-
1 & 2 psi
-
2&3 psi
-
3&4 psi
-
4&5 psi
Questão 2
Questão
In the case of a generator, the voltage regulation is determined by the resistance of the _______
Responda
-
Field winding
-
Shunt winding
-
Armature winding
-
Compensation winding
Questão 3
Questão
The value of field resistance that will limit field current to a value insufficient for voltage build up is called_____
Responda
-
Saturation resistance
-
Critical field resistance
-
Zero output limit
-
Field saturation
Questão 4
Questão
Interpole coils consist of ______
Responda
-
Small number of turns of large gage wire
-
Small number of turns of small gage wire
-
Large number of turns of large gag wire
-
Large number of turns of small gage wire
Questão 5
Questão
Interpole coils are connected
Responda
-
Across the armature
-
Across the series field
-
In series with the armature
-
In series with the shunt field
Questão 6
Questão
A 100KW DC generator is operating at full load; it requires 125KW to turn the generator. What is the efficiency of the generator?
Responda
-
30%
-
50%
-
80%
-
95%
Questão 7
Questão
The position at which there is no voltage in the armature is
Responda
-
Equalizer area
-
Excitation
-
Neutral plane
-
Location of the field poles
Questão 8
Questão
Which of the following is not a type of DC generator
Responda
-
Compound
-
Electro-magnetic
-
Shunt
-
Series
Questão 9
Questão
The winding that provides high voltage and low current is
Responda
-
Frog-leg
-
Lap wound
-
Wave wound
-
Lap-wave wound
Questão 10
Questão
The winding that provides moderate voltage and current is?
Responda
-
Frog-leg wound
-
Lap wound
-
Wave wound
-
Lap-wave wound
Questão 11
Questão
The item that ride against the commutator to make electrical connection are
Responda
-
Field windings
-
Armature windings
-
Brush
-
Pole pieces
Questão 12
Questão
The magnetic field is sometimes provide by electromagnets. This is done by windings that are wound around the
Responda
-
Brushes
-
Pole piece
-
Armature
-
Case
Questão 13
Questão
A device that converts mechanical input into DC electrical output is a
Responda
-
Alternator
-
Generator
-
Motor
-
Inverter
Questão 14
Questão
The rotating part of the generator is called the
Responda
-
Stator
-
Field
-
Armature
-
Exciter
Questão 15
Questão
The components of a DC generator that converts the armature AC and DC is the
Responda
-
Commutator
-
Alternator
-
Converter
-
Field
Questão 16
Questão
The winding that provides low voltage and high current is
Responda
-
Frog-leg wound
-
Lap wound
-
Wave wound
-
Lap-wave wound
Questão 17
Questão
In a compound generator, the setting of the setting of the amount of current in the series and shunt field windings determine the
Responda
-
Complexing
-
Compounding
-
Exciting
-
Differential
Questão 18
Questão
In a generator the series field diverter is also called the
Responda
-
Series field shunt rheostat
-
Series field series rheostat
-
Series field exciter
-
Shunt field exciter
Questão 19
Questão
Counter-torque is caused by the magnetic attraction between the field poles and the
Responda
-
Statot
-
Stator winding
-
Interpole
-
Armature
Questão 20
Questão
Armature reaction is the bending of the stator magnetic field by the _____ magnetic field
Responda
-
Armature
-
Stator
-
Interpoles
-
Stator windings
Questão 21
Questão
Series field windings are connected in series with the armature. They are wound with
Responda
-
Many turns large wire
-
Many turns small wire
-
Few turns large wire
-
Few turns small wire
Questão 22
Questão
The output of a shunt generator is usually controlled by the amount of
Responda
-
Field excitation
-
Input voltage
-
Input torque
-
Armature excitation current
Questão 23
Questão
A generator contains both series and shunt windings is called a
Responda
-
Self-excited generator
-
Separately excited generator
-
Complex generator
-
Compound generator
Questão 24
Questão
A generator is self-exited when
Responda
-
An outside source of AC is used to produce magnetism in the pole pieces
-
An outside source of DC is used to produce magnetism in the pole pieces
-
An initial voltage is produced by residual magnetism in the pole pieces
-
An initial voltage is produced in the series field to increase voltage
Questão 25
Questão
The CEC states that a generator shall be equipped with an indicating switch or circuit breaker except when
Responda
-
The generator is compounding
-
The generator is equipped with a governor
-
The drive means can be readily shut down and is not in parallel
-
The generator is arranged in parallel
Questão 26
Questão
When a 2 pole circuit breaker is used to protect a 3 wire DC generator, it must be installed so as to disconnect
Responda
-
Each armature lead
-
each series field winding lead
-
Each shunt field winding leaf
-
Source power
Questão 27
Questão
At what point in a DC generator system must the ground be attached
Responda
-
Each armature lead
-
Individual service
-
On interior services
-
One or more supply stations
Questão 28
Questão
When a 4 pole circuit breaker is used to protect a 3-wire DC generator, the breaker must be connected
Responda
-
In series with the armature
-
In parallel with the armature
-
That it is actuated by the entire armature current
-
In parallel with the shunt field
Questão 29
Questão
When a DC machine is cumulative compound
Responda
-
The series and shunt field aid each other in the production of magnetism
-
The series and shunt field are connected in series with each other
-
The series and shunt field oppose each other in the production of magnetism
-
The series and shunt field are connected in parallel with each other
Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.