Layer 2 Switching

Descrição

NSE4 6.0 NSE4 6.0 Quiz sobre Layer 2 Switching, criado por Marcos Avila em 20-07-2018.
Marcos Avila
Quiz por Marcos Avila, atualizado more than 1 year ago
Marcos Avila
Criado por Marcos Avila mais de 6 anos atrás
212
1

Resumo de Recurso

Questão 1

Questão
VLAN Tags add a 4-byte extension to and ethernet frame
Responda
  • True
  • False

Questão 2

Questão
Layer 2 devices can rewrite tags
Responda
  • True
  • False

Questão 3

Questão
Layer 3 devices can rewrite tags before routing
Responda
  • True
  • False

Questão 4

Questão
Frames sent or received by the physical interface segment are never tagged; they belong to the native VLAN.
Responda
  • True
  • False

Questão 5

Questão
In what operating mode does FortiGate need to be, to route traffic between VLANS?
Responda
  • a. Transparent mode
  • b. NAT mode

Questão 6

Questão
FortiGate, as a NAT router, splits the network into multiple collision domains, reducing the traffic in the network and improving the response time.
Responda
  • True
  • False

Questão 7

Questão
By default, all interfaces on a VDOM belong to the same broadcast domain, even interfaces with different VLAN IDs.
Responda
  • True
  • False

Questão 8

Questão
Which of the following statements about FortiGate operating in transparent mode is true?
Responda
  • a. It has a management IP address.
  • b. Each interface has its own IP address.

Questão 9

Questão
How can an administrator configure FortiGate to have four interfaces in the same broadcast domain?
Responda
  • a. Create a firewall policy on each of the four interfaces.
  • b. Configure the operation mode as transparent and use the same forward domain ID.

Questão 10

Questão
When you create a virtual wire pair, you must select two physical interfaces or more.
Responda
  • True
  • False

Questão 11

Questão
Wildcard VLAN
Responda
  • Enable: Policies apply equally to the physical interfaces and VLANs. Disable: Policies apply only to the physical interfaces (packets with VLAN tags are denied).
  • Enable: Policies apply only to the physical interfaces (packets with VLAN tags are denied). Disable: Policies apply equally to the physical interfaces and VLANs.

Questão 12

Questão
What configuration setting must be enabled to allow VLAN- tagged traffic through a virtual wire pair?
Responda
  • a. Transparent bridging
  • b. Wildcard VLAN

Questão 13

Questão
How is traffic handled in a virtual wire pair?
Responda
  • a. Incoming traffic to one interface is always forwarded out through the other interface.
  • b. Traffic is forwarded based on the destination MAC address.

Questão 14

Questão
Can group multiple physical and wireless interfaces into a single virtual switch interface Only supported in NAT mode Acte like a traditional layer 2 switch The interfaces: Share the same IP address Belong to the same broadcast domain
Responda
  • Software switch
  • Forward domain
  • Virtual wire pair

Questão 15

Questão
In which operating mode is the software switch function supported?
Responda
  • a. Transparent mode
  • b. NAT mode

Questão 16

Questão
Which of the following can be members of a software switch?
Responda
  • a. VLAN interface
  • b. Wireless Interface

Questão 17

Questão
Broadcast Storms - When a switch receives a broadcast message, that message is sent on all ports. - With a redundant path, this can lead to a broadcast storm.
Responda
  • True
  • False

Questão 18

Questão
What is the default STP mode for FortiGate?
Responda
  • a. FortiGate passively forwards BPDUs
  • b. FortiGate has all STP functions disabled.

Semelhante

Francês
BeatrizL
Vocabulário de Espanhol
Debis
Vocabulário de Geografia
Alessandra S.
Sociologia - Origem
Malu Miralha
QUESTIONÁRIO DE INFORMÁTICA: SISTEMAS OPERACIONAIS
anapaulabrasilam
10 Dicas para a Redação do ENEM
GoConqr suporte .
PROCESSO DISCIPLINAR
GoConqr suporte .
Liderança
Liliane Tubino
Acentuação gráfica
Lúcia Amaral
Antibióticos
Drive Med
Tabela Periódica
Fael Berranteiro